{"product_id":"honda-dot-3-brake-fluid-32-fl-oz-1-quart-2-pack-oem-hydraulic-fluid-meets-sae-j1703-fmvss-116-284-f-wet-boiling-point","title":"Honda DOT 3 Brake Fluid 32 fl oz (1 Quart) 2-Pack — OEM hydraulic fluid, meets SAE J1703 \u0026 FMVSS 116, 284°F wet boiling point","description":"\u003cp\u003e\u003cstrong\u003eHonda DOT 3 Motor Vehicle Brake Fluid (32 fl oz, 1 Quart) — two-bottle pack is a factory-formulated hydraulic brake fluid designed to protect and help maintain Honda braking systems under normal driving conditions.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis OEM Honda DOT 3 fluid is engineered to meet the specifications of Honda vehicles and U.S. safety regulations, offering consistent viscosity and corrosion resistance for hydraulic components. Supplied as two 32 fl oz (1 quart) bottles, it’s intended for topping off or replacing brake fluid in passenger cars, light trucks, and many motorcycles that call for DOT 3. The formula conforms to Federal Motor Vehicle Safety Standard No. 116 and SAE J1703, with a minimum wet boiling point of 284°F (140°C), balancing performance and affordability for routine service intervals.\u003c\/p\u003e\n\n\u003ch3\u003eWhat makes Honda DOT 3 different from other brake fluids?\u003c\/h3\u003e\n\u003cp\u003eHonda DOT 3 is formulated specifically to match the fluid properties recommended by Honda engineers, helping maintain pedal feel and hydraulic responsiveness. It meets established industry and federal safety specifications to ensure compatibility with seals and metals used in many Honda braking systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to Honda specifications for material compatibility and performance.\u003c\/li\u003e\n  \u003cli\u003eMeets SAE J1703 and FMVSS No. 116 standards for DOT 3 fluids.\u003c\/li\u003e\n  \u003cli\u003eStable viscosity for predictable braking feel across typical temperature ranges.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the wet boiling point affect braking reliability?\u003c\/h3\u003e\n\u003cp\u003eThe wet boiling point indicates the lowest boiling temperature when fluid has absorbed moisture over time. A minimum wet boiling point of 284°F (140°C) helps reduce the risk of vapor lock and spongy pedal sensation during normal driving and moderate towing or steep descents.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e284°F (140°C) minimum wet boiling point provides reserve temperature tolerance.\u003c\/li\u003e\n  \u003cli\u003eReduced chance of vapor formation under typical operating conditions.\u003c\/li\u003e\n  \u003cli\u003eHelps maintain consistent pedal firmness during everyday use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use and store this brake fluid?\u003c\/h3\u003e\n\u003cp\u003eUse Honda DOT 3 when the vehicle owner’s manual specifies DOT 3 fluid. Replace fluid following recommended service intervals or when contamination\/moisture is suspected. Keep bottles tightly sealed and store in a cool, dry place away from heat and open flame—brake fluid is hygroscopic and absorbs moisture from the air.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOnly use with vehicles calling for DOT 3; check the owner’s manual first.\u003c\/li\u003e\n  \u003cli\u003eKeep containers sealed and discard fluid that appears dark or contaminated.\u003c\/li\u003e\n  \u003cli\u003eStore upright, away from direct sunlight, heat sources, and combustible materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I mix Honda DOT 3 with other brake fluids?\u003c\/h3\u003e\n\u003cp\u003eWhile DOT 3 fluids are chemically compatible with other glycol-based DOT 3 and DOT 4 fluids, mixing can alter performance characteristics. For best results and to preserve brake system longevity, top up or replace with the same type recommended in your vehicle manual or perform a full system flush if switching fluid types.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMixing DOT 3 with DOT 4 is generally possible but may change boiling point and service interval.\u003c\/li\u003e\n  \u003cli\u003eA full fluid flush is recommended when changing fluid types or when contamination is present.\u003c\/li\u003e\n  \u003cli\u003eAlways follow manufacturer guidance and professional service recommendations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This two-pack of Honda DOT 3 32 fl oz quarts is ideal for Honda owners, independent mechanics, and DIY enthusiasts who want OEM-specified brake fluid for routine maintenance or small repairs. It’s best for vehicles and motorcycles requiring DOT 3 fluid, drivers seeking straightforward, specification-compliant replacement fluid, and shops that prefer factory-formulated products for compatibility and peace of mind.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Honda DOT 3 compatible with DOT 4 fluid?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: DOT 3 and DOT 4 are glycol-based and can be mixed, but mixing alters properties. A full flush is recommended when changing fluid types.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should brake fluid be replaced?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Follow your vehicle’s maintenance schedule; many manufacturers recommend checking fluid annually and replacing every 1–2 years or when contaminated.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":48083102105758,"sku":"B0FRB2YMF3","price":34.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/honda-dot3-front-label.jpg?v=1785824976","url":"https:\/\/northtrailauto.ca\/products\/honda-dot-3-brake-fluid-32-fl-oz-1-quart-2-pack-oem-hydraulic-fluid-meets-sae-j1703-fmvss-116-284-f-wet-boiling-point","provider":"North Trail Auto","version":"1.0","type":"link"}