{"product_id":"hp-tuners-prolink-cable-for-mpvi2-and-mpvi3-2x-0-5v-analog-inputs-500kbps-can-100hz-sampling","title":"HP Tuners PROLINK+ Cable for MPVI2+ and MPVI3 — 2x 0–5V Analog Inputs \u0026 500kbps CAN, 100Hz Sampling","description":"\u003cp\u003e\u003cstrong\u003eThe HP Tuners PROLINK+ cable adds two dedicated 0–5V analog inputs and a 500kbps CAN bus input for external sensors when used with MPVI2+ (Pro Feature Set required) or MPVI3 interfaces.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe PROLINK+ cable is a purpose-built accessory that extends the data collection abilities of HP Tuners MPVI2+ and MPVI3 OBD2 scan tools. Sold as cable-only, it provides hardwired connections for analog sensors and a CAN bus feed, sampled at up to 100Hz. The lead uses an M8 connector on the harness end and breaks out to a five-wire harness so you can tap sensors and vehicle networks without cutting factory wiring or relying on temporary adapters.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the PROLINK+ cable capture extra sensor data?\u003c\/h3\u003e\n\u003cp\u003eThe cable supplies two independent 0–5V analog channels for direct sensor inputs plus a dedicated CAN bus line that accepts up to 500kbps. That lets you record voltages from aftermarket sensors (for example boost, temperature, or throttle position) alongside factory data streams for synchronized logging. The 100Hz sampling rate ensures rapid events are captured for tuning and diagnostics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo dedicated analog channels (0–5V) for direct sensor wiring\u003c\/li\u003e\n  \u003cli\u003eOne CAN bus input supporting 500kbps vehicle networks\u003c\/li\u003e\n  \u003cli\u003eSampling up to 100Hz for high-resolution logs\u003c\/li\u003e\n  \u003cli\u003eM8 connector to five-wire harness for neat, secure installs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and interfaces work with this cable?\u003c\/h3\u003e\n\u003cp\u003eThe PROLINK+ cable is specifically compatible with HP Tuners MPVI3 and MPVI2+ interfaces. MPVI2+ users must have purchased the Pro Feature Set to enable the extra inputs; MPVI3 supports the cable natively. It is designed for OBD2-equipped vehicles where the host interface can accept external analog and CAN inputs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with MPVI3 interfaces out of the box\u003c\/li\u003e\n  \u003cli\u003eCompatible with MPVI2+ when Pro Feature Set is activated\u003c\/li\u003e\n  \u003cli\u003eWorks on OBD2 platforms that accept external CAN\/analog logging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the cable installed and protected during use?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: plug the M8 connector into the matching port on the harness, then connect the five wires to sensors or CAN lines per HP Tuners wiring guidelines. The harness format reduces the need to splice factory wiring and helps maintain a tidy, serviceable installation. Use proper strain relief and follow vehicle grounding recommendations to ensure clean signals and long-term reliability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eM8 connector provides a secure, keyed connection to the harness\u003c\/li\u003e\n  \u003cli\u003eFive-wire harness breaks out analog, CAN, and ground\/voltage lines cleanly\u003c\/li\u003e\n  \u003cli\u003eNo permanent modifications to ECU connectors required when used as intended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and logging improvements can I expect?\u003c\/h3\u003e\n\u003cp\u003eAdding dedicated analog inputs and a dedicated CAN feed lets you log aftermarket sensors and external modules simultaneously with factory parameters. The 100Hz sample rate captures fast changes more accurately than slower polling, which improves data fidelity for tuning and troubleshooting. This is especially useful when correlating rapid events like boost spikes, throttle transitions, or injector behavior.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigher-resolution logs with 100Hz sampling for transient events\u003c\/li\u003e\n  \u003cli\u003eSynchronized analog and CAN data for clearer correlation\u003c\/li\u003e\n  \u003cli\u003eReduces reliance on auxiliary dataloggers or generic adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The PROLINK+ cable is aimed at tuners, performance enthusiasts, and professional shops that need reliable, high-resolution inputs for aftermarket sensors and CAN devices while using HP Tuners MPVI interfaces. If you use MPVI3 or MPVI2+ with the Pro Feature Set and want cleaner wiring, better sampling, and a vendor-supported connection method, this cable is a practical addition. Note: this listing is cable-only; you must have a compatible MPVI interface and the appropriate feature set activated.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need anything else to use the PROLINK+ cable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — you need an MPVI3 or an MPVI2+ with the Pro Feature Set activated; the cable is sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What sampling rate does the cable support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The PROLINK+ cable supports analog and CAN sampling up to 100Hz for high-resolution logging.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HP Tuners","offers":[{"title":"Default Title","offer_id":48081433919646,"sku":"B0BR65KP28","price":124.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/hp-tuners-prolink-plus-front-connector.jpg?v=1785804257","url":"https:\/\/northtrailauto.ca\/products\/hp-tuners-prolink-cable-for-mpvi2-and-mpvi3-2x-0-5v-analog-inputs-500kbps-can-100hz-sampling","provider":"North Trail Auto","version":"1.0","type":"link"}