{"product_id":"javik-rear-a-arm-bushing-spacer-kit-for-polaris-sportsman-xplorer-urethane-bushings-alloy-spacers","title":"JAVIK Rear A-Arm Bushing \u0026 Spacer Kit for Polaris Sportsman\/Xplorer — Urethane Bushings \u0026 Alloy Spacers","description":"\u003cp\u003e\u003cstrong\u003eJAVIK Rear Suspension A-Arm Bushing Spacer Kit is a complete replacement set of urethane bushings and alloy-steel spacers engineered to restore proper alignment and reduce play in the rear A-arm suspension of compatible Polaris ATVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Polaris Sportsman, Diese-l, Worker or Xplorer has loose rear A-arms, worn pivot feel, or noisy suspension, this kit provides the matched bushings and spacers needed to rebuild the rear suspension mounting points to OEM specification. The kit groups multiple part numbers into one package so you can replace every bushing and spacer that commonly wear out on older models, restoring tighter handling and longer component life.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Polaris models and years does this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is tailored to a range of Polaris ATVs produced across the late 1990s and early 2000s. Check the table below against your VIN or service manual to confirm fitment before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSportsman 335 — 1999–2000\u003c\/li\u003e\n  \u003cli\u003eSportsman 400 — 2001–2002\u003c\/li\u003e\n  \u003cli\u003eSportsman 500 — 1996–2002\u003c\/li\u003e\n  \u003cli\u003eSportsman 700 — 2002\u003c\/li\u003e\n  \u003cli\u003eDiese-l 455 — 1999–2001\u003c\/li\u003e\n  \u003cli\u003eWorker 335 — 1999\u003c\/li\u003e\n  \u003cli\u003eWorker 500 — 1999, 2001\u003c\/li\u003e\n  \u003cli\u003eXplorer 500 — 1997\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and what OEM numbers are covered?\u003c\/h3\u003e\n\u003cp\u003eThe kit bundles a full complement of bushings and spacers so you won’t need to source multiple listings. It corresponds to original equipment (OEM) and replacement numbers commonly referenced in Polaris parts catalogs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 5433063\/5432091 bushings x12, 5020677 spacers x12\u003c\/li\u003e\n  \u003cli\u003eIncluded: 5433413\/5432169 bushings x2, 5433066\/5431596 bushings x4\u003c\/li\u003e\n  \u003cli\u003eIncluded: 5433065\/5432092 bushings x8\u003c\/li\u003e\n  \u003cli\u003eOEM reference numbers: 5020677, 5433063, 5433413, 5433066, 5433065\u003c\/li\u003e\n  \u003cli\u003eReplacement references: 5432169, 5432091, 5431596, 5432092\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these bushings and spacers built, and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eJAVIK ships bushings molded from high-resistance urethane and pairs them with ultra-high-strength alloy steel spacers for durable joint support. That material combination resists abrasion, resists deformation under load, and keeps suspension geometry stable to reduce slop and improve feedback.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUrethane bushings: improved wear resistance compared with stock rubber\u003c\/li\u003e\n  \u003cli\u003eAlloy-steel spacers: maintain correct shaft separation over time\u003c\/li\u003e\n  \u003cli\u003eMatched sets: replacement parts sized to OEM tolerances for straightforward installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard A-arm bushing replacement procedures and typically requires basic hand tools plus a press or bushing driver for tight fits. After installation, check torque settings and inspect periodically for wear or contamination—simple maintenance extends the service life of the kit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools commonly needed: sockets, torque wrench, bearing\/bushing driver or press\u003c\/li\u003e\n  \u003cli\u003eTime estimate: plan 1–3 hours depending on tools and experience\u003c\/li\u003e\n  \u003cli\u003eMaintenance: rinse off mud, inspect bushings annually, re-torque hardware as required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders, DIY mechanics and service shops who own compatible Polaris ATVs (Sportsman, Diese-l, Worker, Xplorer) and want a complete, OEM-referenced rear A-arm rebuild kit. It’s aimed at those repairing worn suspension pivots, eliminating play in the rear end, or preparing older machines for heavy use. JAVIK includes customer support and a one-year warranty to help troubleshoot fitment and post-install questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include every rear A-arm bushing and spacer I need?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package contains all listed bushings and 12 spacers to replace the common rear A-arm pivot points for the specified models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these parts fit my 2000 Polaris Sportsman 335?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit is listed to fit Sportsman 335 models from 1999–2000, but verify with your VIN or service manual before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JAVIK","offers":[{"title":"Default Title","offer_id":48084480917662,"sku":"B0BR56ZSCT","price":30.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/javik-rear-suspension-kit-front-packaging.jpg?v=1785856751","url":"https:\/\/northtrailauto.ca\/products\/javik-rear-a-arm-bushing-spacer-kit-for-polaris-sportsman-xplorer-urethane-bushings-alloy-spacers","provider":"North Trail Auto","version":"1.0","type":"link"}