{"product_id":"jdmspeed-10-5mm-spark-plug-ignition-wire-set-for-lsx-v8-8-piece-kit-high-temp-silicone","title":"JDMSPEED 10.5mm Spark Plug Ignition Wire Set for LSx V8 — 8-Piece Kit, High-Temp Silicone","description":"\u003cp\u003e\u003cstrong\u003eJDMSPEED New Heat 10.5mm spark plug ignition wire set is an 8-piece, ready-to-install replacement designed for LSx (LS1\/LS2\/LS3\/LS6\/LS7) engines, featuring 10.5mm spiral-wound cores and high-temp silicone boots.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a straightforward, OEM-style ignition wire kit to replace worn leads on an LS-series V8, this JDMSPEED set supplies eight matched wires with consistent length and construction for even spark delivery. These wires use a 10.5mm spiral-wound conductor for controlled performance and an ultra-durable silicone outer sleeve and boots engineered to withstand elevated under-hood temperatures. The kit ships complete and ready to install, saving time during routine maintenance or swap projects.\u003c\/p\u003e\n\n\u003ch3\u003eWill these wires fit my LS1, LS2, LS3, LS6 or LS7 engine?\u003c\/h3\u003e\n\u003cp\u003eThese wires are manufactured specifically as a replacement set for common LSx platforms, covering LS1, LS2, LS3, LS6 and LS7 cylinder heads. Confirm fitment by comparing wire lengths and terminal orientations to your current harness before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 8 wires sized for V8 LS-series layouts (one per cylinder).\u003c\/li\u003e\n  \u003cli\u003eWire length: 10.23\" for the supplied lead lengths—verify routing matches your setup.\u003c\/li\u003e\n  \u003cli\u003eTerminals: standard spark plug and coil pack terminations meant for LS-style connections.\u003c\/li\u003e\n  \u003cli\u003eCompatibility note: Check header clearance and accessories; intended for stock-style ignition towers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the 10.5mm spiral-wound cores affect ignition?\u003c\/h3\u003e\n\u003cp\u003eThe spiral-wound core balances conductivity with suppression to manage radio frequency interference and maintain consistent spark energy across cylinders. This design helps keep ignition timing stable and reduces electrical noise that can affect sensitive electronics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCore type: 10.5mm spiral-wound conductor for controlled resistance.\u003c\/li\u003e\n  \u003cli\u003eNoise control: minimizes RFI\/EMI to protect onboard sensors and audio systems.\u003c\/li\u003e\n  \u003cli\u003ePerformance: consistent spark delivery under normal operating loads.\u003c\/li\u003e\n  \u003cli\u003eDurability: spiral construction resists internal fatigue and maintains contact integrity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and temperature limits should I expect?\u003c\/h3\u003e\n\u003cp\u003eJDMSPEED uses ultra-high-strength silicone for the boots and sleeve to resist cracking and oil exposure commonly found in engine bays. While the silicone is robust, the manufacturer specifies use in environments under 200°C; avoid installing these wires where prolonged exposure above that temperature is expected.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBoots\/sleeve: high-temp, flexible silicone for abrasion and oil resistance.\u003c\/li\u003e\n  \u003cli\u003eTemperature guidance: designed for under-200°C engine compartment conditions.\u003c\/li\u003e\n  \u003cli\u003eInstallation: shipped assembled and ready to install out of the box.\u003c\/li\u003e\n  \u003cli\u003eCare: route away from extreme exhaust heat or use additional heat shielding if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation, and what should I check before fitting?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives complete and ready to fit, making it suitable for routine tune-ups or full replacements without special tools beyond basic hand tools. Prior to installation, inspect coil pack and plug tower orientations and compare the supplied wire lengths to your vehicle to ensure neat routing and reliable connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReady-to-install: wires are pre-assembled for immediate fitment.\u003c\/li\u003e\n  \u003cli\u003eTools: basic ratchet and pliers typically suffice for removal and replacement.\u003c\/li\u003e\n  \u003cli\u003eInspection: verify terminal types and lengths match your engine layout.\u003c\/li\u003e\n  \u003cli\u003eRouting tips: avoid tight bends and secure wires with factory clips where available.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This JDMSPEED 8-piece ignition wire set is intended for car owners, mechanics and performance hobbyists replacing worn or damaged spark plug leads on LS-series V8 engines who want a direct-fit, economical option. It suits stock and mildly modified engines that operate within standard under-hood temperature ranges, and for anyone prioritizing a quick, plug-and-play swap with reliable suppression and durable silicone insulation. Always confirm fitment for your specific year and cylinder head configuration before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many wires come in the JDMSPEED set and what length are they?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes 8 wires with a supplied lead length of 10.23 inches per wire.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these wires handle high engine bay temperatures?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They use high-temp silicone boots but are rated for use under 200°C; avoid prolonged exposure above that limit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JDMSPEED","offers":[{"title":"Default Title","offer_id":48081070850206,"sku":"B06XC1Z6VF","price":67.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/jdmspeed-front-packaging-ls-wire-set.jpg?v=1785795881","url":"https:\/\/northtrailauto.ca\/products\/jdmspeed-10-5mm-spark-plug-ignition-wire-set-for-lsx-v8-8-piece-kit-high-temp-silicone","provider":"North Trail Auto","version":"1.0","type":"link"}