{"product_id":"jeazonfa-led-headlight-fog-kit-for-dodge-ram-1500-2500-3500-2013-2018-6500k-pack-of-6","title":"JEAZONFA LED Headlight \u0026 Fog Kit for DODGE RAM 1500\/2500\/3500 (2013–2018) 6500K Pack of 6","description":"\u003cp\u003e\u003cstrong\u003eJEAZONFA plug-and-play LED kit replaces factory hi\/lo and fog bulbs on DODGE RAM 1500\/2500\/3500 (2013–2018) to deliver crisp 6500K white light with long life and fast startup.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete six-piece lighting set is designed specifically for DODGE RAM 1500, 2500, and 3500 models without projector headlights made between 2013 and 2018. It includes a pair of hi\/lo beam bulbs and a pair of fog light bulbs (total pack of 6 pieces accounting for dual-filament sockets), engineered for an even beam, quick thermal management, and an IP68 weather rating. The kit aims to give a brighter, whiter road view while staying compatible with the stock housings and wiring for an easy, tool-free swap.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these JEAZONFA bulbs compared with factory halogens?\u003c\/h3\u003e\n\n\u003cp\u003eThe JEAZONFA bulbs use high-performance 3570 chips rated at about 12,000 lumens per piece, producing a sharp 6500K cool-white appearance that improves contrast without excessive glare. They power on instantly with under 0.01s warm-up and sustain consistent output without dark spots.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e12,000 lm per bulb (approximate specification)\u003c\/li\u003e\n  \u003cli\u003e6500K cool white color for clearer edge definition\u003c\/li\u003e\n  \u003cli\u003eNear-zero startup delay to maximize reaction time\u003c\/li\u003e\n  \u003cli\u003e1:1 bulb profile for matched beam distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these lights fit my RAM without electrical mods?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the kit is engineered for direct replacement in non-projector DODGE RAM headlamp and fog housings from 2013 to 2018. Each lamp uses the factory-style base and a built-in driver so no extra ballast, wiring harness, or external power converter is required for most installations.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play installation: remove factory bulb, insert JEAZONFA bulb\u003c\/li\u003e\n  \u003cli\u003eBuilt-in drivers eliminate external components\u003c\/li\u003e\n  \u003cli\u003eRubber covers and mounting rings designed to fit stock sockets\u003c\/li\u003e\n  \u003cli\u003eEstimated install time: under 5 minutes per bulb in accessible housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the kit handle heat, durability, and weather exposure?\u003c\/h3\u003e\n\n\u003cp\u003eThe lamps use an aviation-grade aluminum body with an active cooling system featuring a silent turbofan rated at 15,000 RPM to draw heat away from the LEDs. The assembly has an IP68 ingress protection rating and a working temperature range from -40°F to +176°F for reliable operation in rain, snow, and dust.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAviation aluminum housing for fast heat conduction\u003c\/li\u003e\n  \u003cli\u003eIntegrated 15,000 RPM cooling fan for sustained brightness\u003c\/li\u003e\n  \u003cli\u003eIP68 waterproof rating resists water and dirt intrusion\u003c\/li\u003e\n  \u003cli\u003eEstimated lifespan over 50,000 hours under normal use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow accurate is the beam pattern and will it blind other drivers?\u003c\/h3\u003e\n\n\u003cp\u003eThese JEAZONFA bulbs are built to match the original bulb geometry with a 360° adjustable lock ring to fine-tune position within the headlamp. Properly aligned, the kit aims to eliminate black spots and dark zones while producing a focused beam that avoids unnecessary glare for oncoming traffic.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1:1 original bulb design for correct filament-to-lens alignment\u003c\/li\u003e\n  \u003cli\u003eAdjustable locking ring lets you dial in cutoff and spread\u003c\/li\u003e\n  \u003cli\u003eReduced glare when installed and aligned to factory specifications\u003c\/li\u003e\n  \u003cli\u003eUniform light output across the beam without flicker\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This JEAZONFA kit is intended for DODGE RAM 1500, 2500, and 3500 owners (models 2013–2018) who want a straightforward upgrade from halogen to a brighter, cooler LED color temperature without modifying wiring or housings. It's a fit for drivers who prioritize faster startup, improved night visibility, and long-lasting components with weather resistance. If you have projector-style headlights or require vehicle-specific CANbus error suppression, verify compatibility before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these bulbs compatible with projector headlights?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This kit is designed for DODGE RAM (2013–2018) models without projector headlights.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need extra wiring or ballasts to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These JEAZONFA bulbs have built-in drivers and are plug-and-play for most stock sockets.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JEAZONFA","offers":[{"title":"Default Title","offer_id":48083915079838,"sku":"B0FKMWDD17","price":94.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/jeazonfa-front-packaging-view.jpg?v=1785839961","url":"https:\/\/northtrailauto.ca\/products\/jeazonfa-led-headlight-fog-kit-for-dodge-ram-1500-2500-3500-2013-2018-6500k-pack-of-6","provider":"North Trail Auto","version":"1.0","type":"link"}