{"product_id":"jeemiter-3-8-id-fuel-hose-25ft-kit-sae-30r7-nbr-300-psi-includes-10-clamps","title":"Jeemiter 3\/8\" ID Fuel Hose 25ft Kit — SAE 30R7 NBR, 300 PSI, Includes 10 Clamps","description":"\u003cp\u003e\u003cstrong\u003eJeemiter's 3\/8\" ID Fuel Hose 25FT kit is a professional-grade SAE 30R7 NBR fuel line designed to carry gasoline, diesel, biodiesel and engine oil safely, and includes ten clamps for secure installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete hose kit supplies a long, flexible fuel line built to handle tough conditions and frequent installations. Made from oil-resistant NBR and certified to SAE 30R7 standards, the 25-foot length and 3\/8-inch inner diameter fit many small-engine, automotive, and marine fuel applications. The package includes ten corrosion-resistant clamps so you can assemble or replace connections without searching for fittings.\u003c\/p\u003e\n\n\u003ch3\u003eWhat pressure and temperature limits can this fuel hose handle?\u003c\/h3\u003e\n\u003cp\u003eThe Jeemiter hose is engineered for demanding service with a 300 PSI working pressure and a 1,160 PSI burst rating for short-term overload protection. Its NBR compound tolerates a broad thermal envelope so it stays flexible and durable in extreme weather.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: 300 PSI\u003c\/li\u003e\n  \u003cli\u003eBurst pressure: 1,160 PSI\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range: -40°F to 257°F\u003c\/li\u003e\n  \u003cli\u003eMaterial: oil-resistant NBR for fuel compatibility and longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this hose compatible with my vehicle or marine craft?\u003c\/h3\u003e\n\u003cp\u003eThis 3\/8\" inner diameter hose suits many small engines, motorcycles, cars, trucks, and outboard\/auxiliary marine systems where SAE 30R7 fuel lines are specified. It is formulated to transport gasoline, diesel, biodiesel, engine oil, hydraulic fluids, water and compressed air in non-pressurized or moderate-pressure circuits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 3\/8\" ID fuel fittings and most standard barb connectors\u003c\/li\u003e\n  \u003cli\u003eApproved to SAE 30R7 for automotive fuel and engine oil lines\u003c\/li\u003e\n  \u003cli\u003eSuitable for boats, ATVs, lawn equipment, and light trucks\u003c\/li\u003e\n  \u003cli\u003eNot for high-pressure fuel injection systems without proper adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains a single 25-foot length of 3\/8\" ID SAE 30R7 NBR hose plus ten hose clamps for secure joins. Its lightweight construction and kink-resistant flexibility let you route the line through tight engine bays and around obstacles with minimal effort.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne 25-foot, 3\/8\" inner diameter SAE 30R7 NBR hose\u003c\/li\u003e\n  \u003cli\u003eTen corrosion-resistant clamps for multiple connection points\u003c\/li\u003e\n  \u003cli\u003eFlexible design for easy routing and trimming to length\u003c\/li\u003e\n  \u003cli\u003eCan be cut cleanly and attached with standard fuel fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I verify compatibility and safety before using this hose?\u003c\/h3\u003e\n\u003cp\u003eMeasure your system's pressure, fitting size and fuel type before installation to ensure SAE 30R7 and 300 PSI working pressure meet your requirements. Inspect fittings, clamps and routed runs regularly for wear, chafing or leaks and replace if any damage appears.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm your system does not exceed 300 PSI continuous pressure\u003c\/li\u003e\n  \u003cli\u003eUse the included clamps and recommended fittings for secure connections\u003c\/li\u003e\n  \u003cli\u003eAvoid contact with sharp edges and hot exhaust components\u003c\/li\u003e\n  \u003cli\u003eReplace after visible degradation or after long-term chemical exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Technicians, DIY mechanics, marine owners and fleet operators who need a reliable, oil-resistant replacement or installation hose will find this Jeemiter kit useful. It’s intended for fuel and fluid transfer in small engines and light automotive\/marine systems where SAE 30R7 compliance, a 3\/8\" ID, and a long, flexible run are required. For fuel-injection lines or systems that demand specialized fittings or higher continuous pressure, consult your equipment manual or a professional before use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this hose for diesel and biodiesel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The oil-resistant NBR compound is compatible with diesel and many biodiesel blends; verify blend compatibility for long-term exposure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the included clamps stainless steel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes corrosion-resistant clamps suitable for automotive and marine use, but they are not specified as marine-grade stainless steel.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Jeemiter","offers":[{"title":"Default Title","offer_id":48083255132318,"sku":"B0C3VVX897","price":54.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/jeemiter-front-packaging-fuel-hose.jpg?v=1785829972","url":"https:\/\/northtrailauto.ca\/products\/jeemiter-3-8-id-fuel-hose-25ft-kit-sae-30r7-nbr-300-psi-includes-10-clamps","provider":"North Trail Auto","version":"1.0","type":"link"}