{"product_id":"jetuplusllc-brake-master-cylinder-assembly-for-tomberlin-e-merge-500-e2-e4-front-brake-oem-fitment-part-1007491-1007840","title":"Jetuplusllc Brake Master Cylinder Assembly for Tomberlin E‑merge 500 \/ E2 \/ E4 — Front Brake, OEM Fitment (Part 1007491\/1007840)","description":"\u003cp\u003e\u003cstrong\u003eThe Jetuplusllc Brake Master Cylinder Assembly replaces the front brake hydraulic unit on compatible Tomberlin E‑merge 500, E2 and E4 golf carts to restore reliable stopping power.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis new master cylinder assembly is manufactured to match OEM fitment for a range of Tomberlin models, offering a ready-to-install front brake component with part numbers 1007491 and 1007840. Designed as a direct replacement, it arrives ready for mounting and plumbed into the existing brake lines, helping return proper hydraulic pressure and pedal feel after a failed or worn original unit.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Tomberlin carts will this assembly fit?\u003c\/h3\u003e\n\u003cp\u003eIt fits specific Tomberlin E‑merge series and E2\/E4 derivatives that use the same front brake layout. Check your cart’s model and the manufacturer part numbers to confirm compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible series: E‑merge 500, E2 SE, E2 LE, E2 SS, E2 SS Coupe, E2 Revenge\u003c\/li\u003e\n  \u003cli\u003eAlso fits: E4 LE Plus, E4 Revenge, E4 SS Saloon, Ghosthawk\u003c\/li\u003e\n  \u003cli\u003eManufacturer part numbers: 1007491 and 1007840\u003c\/li\u003e\n  \u003cli\u003eReplacement location: front brake hydraulic assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installing this master cylinder improve braking performance?\u003c\/h3\u003e\n\u003cp\u003eInstalling a properly matched master cylinder restores hydraulic pressure and pedal modulation lost from leaks or internal wear. Once fitted and bled correctly, you'll notice firmer pedal feel and more consistent stopping response across speeds and loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores hydraulic pressure to the front brakes\u003c\/li\u003e\n  \u003cli\u003eReduces spongy pedal sensation caused by internal leaks\u003c\/li\u003e\n  \u003cli\u003eImproves brake balance and repeatable stopping distances\u003c\/li\u003e\n  \u003cli\u003eWorks with existing brake lines and calipers on compatible models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic brake work: mount the unit, reconnect the brake lines, and properly bleed the system to remove air. Use fresh DOT‑approved brake fluid and follow torque and safety guidelines; if uncertain, have a qualified technician complete the job.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires brake line reconnection and a complete bleed procedure\u003c\/li\u003e\n  \u003cli\u003eUse manufacturer‑recommended brake fluid type and clean tools\u003c\/li\u003e\n  \u003cli\u003eInspect hoses and fittings; replace any corroded hardware before finishing\u003c\/li\u003e\n  \u003cli\u003eTest brakes at low speed in a safe area after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose this Jetuplusllc replacement over an aftermarket general unit?\u003c\/h3\u003e\n\u003cp\u003eThis assembly is produced to fit Tomberlin models that use the listed part numbers, so it minimizes modification and alignment issues. The unit is new and packaged to provide the correct mounting points, port locations, and performance characteristics expected on the originals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNew, guaranteed fit and build quality for listed Tomberlin models\u003c\/li\u003e\n  \u003cli\u003eCorrect front placement and factory‑style connections\u003c\/li\u003e\n  \u003cli\u003eSold with the specific Tomberlin part numbers to simplify verification\u003c\/li\u003e\n  \u003cli\u003eReduces downtime compared with custom retrofits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: this brake master cylinder assembly is intended for Tomberlin owners, fleet managers, and repair shops servicing E‑merge 500, E2 and E4 series carts that require a front brake hydraulic replacement. It suits anyone seeking a like‑for‑like, new replacement to restore safe braking performance without extensive modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this master cylinder fit my Tomberlin E2 SE?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this assembly fits E2 SE models if your cart uses Tomberlin part number 1007491 or 1007840.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need new brake lines to install this unit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Usually no; it uses the existing front brake lines, though inspect hoses and fittings and replace if damaged.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Jetuplusllc","offers":[{"title":"Default Title","offer_id":48086711795870,"sku":"B0BNV68D45","price":60.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/jetuplusllc-master-cylinder-front-view.jpg?v=1785902615","url":"https:\/\/northtrailauto.ca\/products\/jetuplusllc-brake-master-cylinder-assembly-for-tomberlin-e-merge-500-e2-e4-front-brake-oem-fitment-part-1007491-1007840","provider":"North Trail Auto","version":"1.0","type":"link"}