{"product_id":"klanata-wired-3-pin-winch-remote-control-kit-9-2-ft-cable-compact-handheld-for-atv-utv","title":"Klanata Wired 3-Pin Winch Remote Control Kit — 9.2 ft Cable, Compact Handheld for ATV\/UTV","description":"\u003cp\u003e\u003cstrong\u003eThe Klanata 3 PIN Winch Remote Control Kit is a compact, wired electric controller with a 9.2 ft (2.8 m) cable, built to operate compatible 3-pin ATV\/UTV winches reliably.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis handheld remote and matching socket offer a straightforward, plug-and-play solution for small to medium off-road winches where a stable wired connection is preferred over wireless options. It’s tailored for 3-pin systems; before ordering, confirm your winch’s plug type and wiring orientation. The controller’s compact footprint fits tight installations and is intended for recreational off-road use rather than heavy-duty truck winches.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this wired winch remote simplify winching tasks?\u003c\/h3\u003e\n\u003cp\u003eThe Klanata wired remote eliminates pairing steps, radio interference, and battery concerns common to wireless remotes. Once connected via the standard 3-pin plug, it provides immediate, consistent signaling between the operator and the winch motor for smoother pulls and safer control.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play 3-pin connector for fast installation when compatible\u003c\/li\u003e\n  \u003cli\u003eWired connection ensures steady communication without signal dropouts\u003c\/li\u003e\n  \u003cli\u003eHandheld remote gives direct control of in\/out winch commands\u003c\/li\u003e\n  \u003cli\u003eCompact unit fits limited mounting locations on ATVs and UTVs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this controller work with my winch and vehicle?\u003c\/h3\u003e\n\u003cp\u003eCompatibility is limited to winches that use the standard 3-pin remote interface. It’s commonly used on ATVs and UTVs with small to mid-size winches, but it’s not suitable for many heavy-duty truck or Jeep winches that use different plugs or wiring schemes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for 3-pin winch systems only\u003c\/li\u003e\n  \u003cli\u003eBest for small to medium recreational winches on ATVs\/UTVs\u003c\/li\u003e\n  \u003cli\u003eNot recommended for heavy-duty or truck-class winches\u003c\/li\u003e\n  \u003cli\u003eVerify plug type and wiring direction before purchase and installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I check first?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward when your winch uses the compatible 3-pin socket: simply connect the controller plug to the winch socket. Still, check the product dimensions and confirm the plug wiring orientation; a quick bench or dry test after connecting helps prevent wiring mistakes before field use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple plug-and-play setup with the included 3-pin connector\u003c\/li\u003e\n  \u003cli\u003e9.2 ft (2.8 m) cable length for flexible mounting and reach\u003c\/li\u003e\n  \u003cli\u003eCompact controller requires less mounting space than heavy-duty remotes\u003c\/li\u003e\n  \u003cli\u003eAlways perform a controlled test cycle to confirm correct wiring and function\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and usage notes should I follow?\u003c\/h3\u003e\n\u003cp\u003eBecause this is a wired remote, routing the cable to avoid pinch points and abrasion is essential. Confirm polarity and switch orientation before putting the winch under load, and do not use the controller on systems outside its intended compatibility range.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSecure cable away from moving parts and hot surfaces\u003c\/li\u003e\n  \u003cli\u003eTest the remote operation with no load before real use\u003c\/li\u003e\n  \u003cli\u003eCheck compatibility to avoid electrical or control faults\u003c\/li\u003e\n  \u003cli\u003eNot intended as a replacement for heavy-duty vehicle winch controllers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Klanata 3 PIN Winch Remote Control Kit is aimed at ATV and UTV owners who use small to medium winches and want a dependable wired controller that’s easy to install and less prone to interference than wireless alternatives. If your winch uses the 3-pin connector and you need a compact handheld remote with a 9.2 ft cable, this kit is a practical, cost-effective accessory. Avoid this product if your rig requires a different plug type, heavy-duty winch control, or custom wiring modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this remote compatible with truck or Jeep winches?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It’s intended for 3-pin small to medium ATV\/UTV winches and not recommended for heavy-duty truck or Jeep winches.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long is the cable and can I extend it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The cable is 9.2 ft (2.8 m). Extension is possible but check connector\/wire gauge and secure splices to maintain reliability.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Klanata","offers":[{"title":"Default Title","offer_id":48086098411678,"sku":"B0D672536M","price":42.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/klanata-front-view-controller-socket.jpg?v=1785884618","url":"https:\/\/northtrailauto.ca\/products\/klanata-wired-3-pin-winch-remote-control-kit-9-2-ft-cable-compact-handheld-for-atv-utv","provider":"North Trail Auto","version":"1.0","type":"link"}