{"product_id":"ktumininv-mini-bike-air-filter-adapter-kit-62mm-for-predator-212cc-gx160-gx200-clones-pleated-high-flow","title":"KTUMININV Mini Bike Air Filter Adapter Kit 62mm — for Predator 212cc \u0026 GX160\/GX200 Clones, Pleated High-Flow","description":"\u003cp\u003e\u003cstrong\u003eKTUMININV's upgraded 62mm mini bike air filter adapter kit converts small-engine carburetors to a larger, high-flow intake that improves airflow and filtration for Predator 212cc, 224cc, 196cc and compatible GX160\/GX200-style engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit replaces the stock intake with a 62mm pleated filter, metal mesh prefilter and a reinforced metal base to supply cleaner air at higher volume for go-kart, mini bike and small utility engine applications. It includes the adapter interface, inlet pipe and installation tools so you can fit the unit to a range of carburetor flanges commonly found on Coleman CT200U, BT200X, KT196 and similar models. The components are designed for durability and straightforward installation while maintaining compatibility with several clone engine platforms.\u003c\/p\u003e\n\n\u003ch3\u003eWill this adapter fit my Predator 212cc or 196cc clone?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit targets Hemi and non-Hemi Predator 212cc and similar 224cc\/196cc 6.5 hp engines and also supports many GX160\/GX200-style clone engines. Fitment depends on your carburetor throat diameter and flange type, so verify measurements before purchasing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible engines: Predator 212cc\/224cc\/196cc and GX160\/GX200 clones.\u003c\/li\u003e\n  \u003cli\u003eCommon vehicle fits: Coleman CT200U, BT200X, KT196, Massimo and several Mini Baja models.\u003c\/li\u003e\n  \u003cli\u003eKey measurement: 62mm intake diameter and included adapter interfaces.\u003c\/li\u003e\n  \u003cli\u003eCheck bolt pattern and carburetor throat to confirm fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the filter change performance and airflow?\u003c\/h3\u003e\n\n\u003cp\u003eThe larger 62mm intake and pleated filter media increase the surface area for air to pass through, improving total airflow to the carburetor while still blocking dust and debris. The metal mesh prefilter and reinforced base help the unit stand up to vibration and heat in off-road use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePleated filter paper for greater filtration area and airflow.\u003c\/li\u003e\n  \u003cli\u003eMetal mesh layer extends service life and screens larger particles.\u003c\/li\u003e\n  \u003cli\u003eUpgraded metal base resists deformation under heat and pressure.\u003c\/li\u003e\n  \u003cli\u003eDesigned to feed more clean air into the carburetor throat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is included and how hard is installation?\u003c\/h3\u003e\n\n\u003cp\u003eThe package arrives with the 62mm air filter, a 12mm cold intake prefilter, an adapter interface kit, an inlet pipe and two installation tools. Installation is intended to be user-friendly for home mechanics with basic tools; follow included instructions and confirm your carburetor flange matches one of the adapter interfaces.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eContents: 62mm air filter, 12mm cold intake filter, adapter interface kit, inlet pipe, two install tools.\u003c\/li\u003e\n  \u003cli\u003eTools included for clamp and seal assembly; additional hand tools may be required.\u003c\/li\u003e\n  \u003cli\u003eTypical install time: 15–45 minutes depending on vehicle and familiarity.\u003c\/li\u003e\n  \u003cli\u003eVerify sizes and orientation before final tightening to prevent leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I care for and maintain the filter?\u003c\/h3\u003e\n\n\u003cp\u003eRoutine maintenance keeps the filter working effectively: inspect for clogged media, clean or replace the pleated element per use conditions, and check seals and clamps for tightness after initial runs. The metal components tolerate cleaning and reinstallation, while the paper media should be replaced if saturated or damaged.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eInspect after heavy off-road use or dusty conditions.\u003c\/li\u003e\n  \u003cli\u003eClean the mesh prefilter with compressed air or mild washing and dry fully.\u003c\/li\u003e\n  \u003cli\u003eReplace pleated filter paper if oil, water, or tears are present.\u003c\/li\u003e\n  \u003cli\u003eRetighten clamps and check adapter seals after first few hours of operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This adapter kit is intended for owners and hobbyists who run Predator-style 212cc\/196cc engines or Honda GX160\/GX200 clones in go-karts, mini bikes, small ATVs and utility machines and who want a durable, higher-flow intake solution. Choose this kit if you need an upgrade that combines a larger-diameter intake, reinforced metal hardware and a practical installation package—just confirm compatibility with your carburetor flange and engine model before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this adapter fit a Coleman CT200U?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit lists Coleman CT200U\/CT200U-EX among compatible models but confirm your carburetor throat and flange dimensions first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I clean or replace the filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Inspect after heavy dusty use; clean the mesh prefilter as needed and replace the pleated element if it becomes clogged, oil-soaked, or damaged.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KTUMININV","offers":[{"title":"Default Title","offer_id":48086811672734,"sku":"B0D6QG7ST9","price":33.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/ktumininv-front-view-filter-assembly.jpg?v=1785906131","url":"https:\/\/northtrailauto.ca\/products\/ktumininv-mini-bike-air-filter-adapter-kit-62mm-for-predator-212cc-gx160-gx200-clones-pleated-high-flow","provider":"North Trail Auto","version":"1.0","type":"link"}