{"product_id":"l68149-trailer-axle-bearings-kit-for-3500lb","title":"L68149 Trailer Axle Bearings Kit for 3500lb","description":"\u003cp\u003e\u003cstrong\u003eMisakomo L68149 trailer axle bearing kit is a complete replacement set engineered to support 3500 lb spindles (1-1\/16\" to 1-3\/8\") and restore smooth, quiet wheel rotation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis ready-to-install kit gathers the bearings, races, seals and hardware you need to service Spindle #84 and EZ-Lube style axles on 3500 lb trailers. Every component is manufactured from durable materials to resist wear, reduce vibration and extend the life of your hub assembly. The kit arrives in upgraded sealed packaging to keep parts clean and corrosion-free until installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exactly is included and how does it match my trailer?\u003c\/h3\u003e\n\u003cp\u003eThe kit is tailored for 3500 lb trailer axles with 1-1\/16\" to 1-3\/8\" spindle diameters (Spindle #84) and designed to work with EZ-Lube configurations. It contains both inner and outer bearings plus all the matching races, seals and mounting hardware so you can complete a hub job without scavenging parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBearings: L68149 (x2) and L44649 (x2)\u003c\/li\u003e\n  \u003cli\u003eRaces: L68111 (x2) and L44610 (x1)\u003c\/li\u003e\n  \u003cli\u003eGrease seals 171255TB (1.719\" I.D., x2), dust caps (1.98\", x2)\u003c\/li\u003e\n  \u003cli\u003eCotter pins, rubber plugs, spindle nuts and washers included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will these parts affect trailer performance and longevity?\u003c\/h3\u003e\n\u003cp\u003eUpgrading worn bearings and seals lowers friction and stabilizes the wheel spindle, which helps reduce heat, noise and wobble at highway speeds. The kit uses hardened components that are less prone to wear, helping the hub run cooler and stay aligned longer under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChrome steel bearings resist surface wear and maintain rolling efficiency\u003c\/li\u003e\n  \u003cli\u003ePrecisely matched races ensure even load distribution across the spindle\u003c\/li\u003e\n  \u003cli\u003eNew grease seals prevent contamination and preserve lubricant life\u003c\/li\u003e\n  \u003cli\u003eIncluded dust caps and plugs protect internals from road debris and water\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard hub overhaul procedures: remove the wheel and hub, replace bearings and races, fit new seals and repack with grease, then reassemble and torque the spindle nut to spec. The kit supplies the common hardware needed, but routine tools and a torque wrench are required for a safe, correct fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRepack bearings with marine or wheel-bearing grease before assembly\u003c\/li\u003e\n  \u003cli\u003eInspect spindle for scoring or pitting; replace if damaged\u003c\/li\u003e\n  \u003cli\u003eUse a bearing race driver to seat races without distortion\u003c\/li\u003e\n  \u003cli\u003eAdjust endplay per manufacturer specifications and secure with cotter pin\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and packaging protections come with the kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit is shipped with upgraded sealed bags for each component to resist rust and contamination during storage or transport. Misakomo backs the package with a 12-month warranty to cover defective materials or workmanship under normal use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIndividual sealed bags for bearings, seals and small hardware\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion packing helps long-term storage before installation\u003c\/li\u003e\n  \u003cli\u003e12-month warranty protects against defects in materials and build\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fitment and troubleshooting questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Misakomo L68149 kit is intended for trailer owners, DIY mechanics and fleet technicians working on single-axle or tandem trailers rated at 3500 lb that use Spindle #84 or EZ-Lube axles. It’s suited for those rebuilding hubs, replacing worn bearings and seals, or preparing trailers for heavy-use seasons where reliable, quiet rotation is important. If your axle specs match 1-1\/16\" to 1-3\/8\" spindle diameters and you want a full set of matched components in rust-resistant packaging, this kit provides a straightforward, cost-effective solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit EZ-Lube axles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Misakomo L68149 kit is compatible with EZ-Lube axles using Spindle #84 for 3500 lb trailers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long is the warranty period?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Misakomo provides a 12-month warranty covering defects in materials and workmanship.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Misakomo","offers":[{"title":"Default Title","offer_id":48087648338078,"sku":"B0CH9YZZVY","price":39.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/misakomo-front-packaging.jpg?v=1785927536","url":"https:\/\/northtrailauto.ca\/products\/l68149-trailer-axle-bearings-kit-for-3500lb","provider":"North Trail Auto","version":"1.0","type":"link"}