{"product_id":"lake-country-hdo-ccs-orange-foam-polishing-pad-5-5-fits-5-backing-dual-density-cooling-chamber","title":"Lake Country HDO-CCS Orange Foam Polishing Pad — 5.5\" (fits 5\" backing), dual-density, cooling chamber","description":"\u003cp\u003e\u003cstrong\u003eThe Lake Country HDO-CCS Orange Foam Polishing Pad is a 5.5\" dual-layer polishing pad engineered for medium cutting and polishing on long-stroke dual-action machines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis orange HDO-CCS pad combines a dual-density foam profile, a built-in cooling chamber, and the brand's patented collapsed cell structure to deliver controlled cutting, reduced heat buildup, and consistent product release. Designed for use with 5\" backing plates on long-throw DA polishers, the pad bridges the gap between aggressive compounding and fine finishing—making it a versatile choice during multi-step correction and polish-to-seal workflows.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this pad perform on a long-stroke dual-action machine?\u003c\/h3\u003e\n\n\u003cp\u003eThe pad is tailored for long-stroke DA polishers, where its dual-layer foam and tapered edges help maintain contact on curved panels while limiting pad flip and skipping. The face offers moderate cutting power that breaks down polish efficiently without generating excessive heat.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned for 5.5\" (fits 5\" backing plates) long-throw DA polishers.\u003c\/li\u003e\n  \u003cli\u003eDual-density foam stabilizes the pad on curved surfaces for consistent finish.\u003c\/li\u003e\n  \u003cli\u003eTapered edges reduce pad roll and minimize swirl marks.\u003c\/li\u003e\n  \u003cli\u003eWorks well at medium speeds for balanced cut and finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I use the orange HDO-CCS pad versus other pads?\u003c\/h3\u003e\n\n\u003cp\u003eThe orange pad is intended as a medium polish step—stronger than a finishing pad but less aggressive than a heavy cutting pad. Use it during the polishing stage to refine light-to-moderate defects, prepare paint for sealants or wax, or to blend a two-step correction process.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFollow a blue cutting pad for heavy defect removal to refine deeper scratches.\u003c\/li\u003e\n  \u003cli\u003eUse before a black finishing pad when preparing for wax, sealant or ceramic coatings.\u003c\/li\u003e\n  \u003cli\u003eIdeal for paint correction stages where moderate polishing is required.\u003c\/li\u003e\n  \u003cli\u003eEffective for removing light swirls, haze, and oxidation buildup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat design features help control heat and polish absorption?\u003c\/h3\u003e\n\n\u003cp\u003eThe pad incorporates a cooling chamber and dual-foam construction that limit heat transfer while resisting product soak-in. Lake Country's CCS (Collapsed Cell Structure) technology reduces polish absorption and pad skipping, so you get even polish distribution and longer usable life from the pad.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt-in cooling chamber redirects heat away from the pad center.\u003c\/li\u003e\n  \u003cli\u003eDual-layer foam reduces friction and helps dissipate temperature.\u003c\/li\u003e\n  \u003cli\u003eCCS technology minimizes polish saturation and promotes consistent finishing.\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop backing allows secure attachment and quick pad changes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use and maintain the pad for best results?\u003c\/h3\u003e\n\n\u003cp\u003eAttach the pad to a compatible 5\" backing plate and start with moderate pressure and speed, allowing the polish to break down on the pad. After each session, clean the pad with warm water and pad cleaner, rinse thoroughly, and let it air dry flat to preserve foam integrity and performance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBreak-in by applying product to the pad face rather than directly to paint.\u003c\/li\u003e\n  \u003cli\u003eUse light-to-moderate pressure and keep the polisher moving to avoid heat spots.\u003c\/li\u003e\n  \u003cli\u003eWash with pad cleaner or mild detergent, rinse, and air dry away from direct sun.\u003c\/li\u003e\n  \u003cli\u003eInspect for foam collapse or heavy contamination; replace when performance declines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Detailers, enthusiasts, and professional car care technicians who need a reliable medium-polish pad for long-throw DA polishers will find this Lake Country HDO-CCS orange pad useful. It’s suited to multi-step correction workflows where controlled cutting, reduced heat, and consistent polish transfer matter—perfect for refining paint between compounding and finishing stages without overworking the surface.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this pad fit my 5\" backing plate?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 5.5\" pad is designed to work with 5\" hook-and-loop backing plates commonly used on long-throw DA polishers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this pad for applying wax or sealant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The orange HDO-CCS pad is suitable for applying waxes and sealants after polishing to help spread product evenly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Lake Country","offers":[{"title":"Default Title","offer_id":48085093187742,"sku":"B0FHJLFPTD","price":36.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/lake-country-hdo-ccs-orange-pad-front-view.jpg?v=1785867363","url":"https:\/\/northtrailauto.ca\/products\/lake-country-hdo-ccs-orange-foam-polishing-pad-5-5-fits-5-backing-dual-density-cooling-chamber","provider":"North Trail Auto","version":"1.0","type":"link"}