{"product_id":"leimo-kparts-fuel-pump-for-kohler-k-series-47-559-11-s-10-16-hp-direct-replacement-high-flow-ethanol-ready","title":"LEIMO KPARTS Fuel Pump for Kohler K-Series 47-559-11-S — 10–16 HP direct-replacement, high-flow, ethanol-ready","description":"\u003cp\u003e\u003cstrong\u003eLEIMO KPARTS 47-559-11-S is a direct-replacement mechanical fuel pump designed for Kohler K-Series and Magnum small engines, matching John Deere AM134269 and Gravely 38789 fitments.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, high-flow fuel pump is built for 10–16 HP Kohler engines and compatible Magnum\/Gravely\/John Deere applications. It swaps into the same mounting pattern as the OEM part and is engineered to handle ethanol-blended fuels and routine operating demands. The unit measures 64 × 62 × 55 mm and uses a 39 mm hole spacing with 6.7 mm bolt holes for straightforward installation on matched engines.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and models does this pump fit?\u003c\/h3\u003e\n\u003cp\u003eThe pump is compatible with a wide range of Kohler K-Series engines (including K241, K301, K321, K341) and several Magnum M-series engines, plus machines that list John Deere AM134269 or Gravely 38789. Use the printed mounting dimensions to confirm fit where model numbers differ.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKohler examples: K241, K301 with multiple block part numbers listed in OEM cross-reference\u003c\/li\u003e\n  \u003cli\u003eMagnum examples: M10, M12, M16 series engines (Magnum designation several part numbers)\u003c\/li\u003e\n  \u003cli\u003eReplaces parts: 4739319-S, 4755901-S, 4755903, 47-559-04S and similar\u003c\/li\u003e\n  \u003cli\u003eAlso listed for Gravely 38789 and John Deere AM134269 applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow reliable and durable is this replacement pump?\u003c\/h3\u003e\n\u003cp\u003eManufactured for durability, the pump uses robust internal components and a high-flow design to resist damage from modern fuels. It’s not the least expensive option available because materials and flow capacity are designed to outlast lower-grade alternatives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-flow internals suited for ethanol blends and routine duty cycles\u003c\/li\u003e\n  \u003cli\u003eSturdy housing and reinforced mounting flange to reduce leak points\u003c\/li\u003e\n  \u003cli\u003eQuality control aimed at consistent pumping performance across units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key dimensions and installation details?\u003c\/h3\u003e\n\u003cp\u003eThe pump’s overall size is compact: 64 mm long, 62 mm wide and 55 mm thick. Mounting hole centers are 39 mm apart with 6.7 mm diameter holes; these specs help confirm compatibility before purchase. While the pump is designed for DIY swap-outs, professional installation is recommended if you’re not experienced with small-engine fuel systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall dimensions: 64 × 62 × 55 mm (L × W × T)\u003c\/li\u003e\n  \u003cli\u003eMounting hole center: 39 mm; hole diameter: 6.7 mm\u003c\/li\u003e\n  \u003cli\u003eDesigned to match OEM bolt pattern for direct replacement on listed engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically involves removing the old pump, transferring any linkages or gaskets, and bolting the new pump in place using the same fasteners. Replace any worn gaskets and inspect fuel lines for cracks or hardening; a clean install reduces future fuel-system issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-install: drain fuel and relieve system pressure for safety\u003c\/li\u003e\n  \u003cli\u003eUse a new gasket or sealant where the pump meets the engine block\u003c\/li\u003e\n  \u003cli\u003eInspect fuel lines and clamps; replace if brittle or damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This LEIMO KPARTS fuel pump is aimed at homeowners, landscapers, and small-engine technicians who maintain Kohler K-Series, Magnum M-series, or machines referenced to John Deere AM134269\/Gravely 38789. It’s suitable for anyone needing a dependable, direct-fit replacement with clear mechanical specifications — ideal when you want OEM-style performance without sourcing original-brand inventory.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump fit Kohler K241 and K301 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s designed to replace OEM pumps on many K241 and K301 variants listed and matches the original mounting pattern.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this pump with ethanol-blended gasoline?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The unit is built to tolerate common ethanol blends used in small-engine fuels.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"LEIMO KPARTS","offers":[{"title":"Default Title","offer_id":48084322091166,"sku":"B07Q4JMFZW","price":31.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/leimo-kparts-front-view-fuel-pump.jpg?v=1785849815","url":"https:\/\/northtrailauto.ca\/products\/leimo-kparts-fuel-pump-for-kohler-k-series-47-559-11-s-10-16-hp-direct-replacement-high-flow-ethanol-ready","provider":"North Trail Auto","version":"1.0","type":"link"}