{"product_id":"lets-go-aero-silent-hitch-pin-for-2-inch-receivers-shp359-metallic-5-8-inch-threaded-zinc-galvanized","title":"Let's Go Aero Silent Hitch Pin for 2-Inch Receivers, SHP359 Metallic, 5\/8-inch Threaded, Zinc Galvanized","description":"\u003cp\u003e\u003cstrong\u003eLet's Go Aero SHP359 is a heavy-duty silent hitch pin engineered to replace noisy clips in 2-inch hollow hitch receivers, reduce shock loads, and provide corrosion-resistant towing performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen towing, a rattling hitch pin can be an ongoing annoyance and a source of wear on hitch components. The Let's Go Aero SHP359 Silent Hitch Pin is designed specifically for 2-inch hitch receivers with a hollow shank and uses a 5\/8-inch threaded pin coupled with a patented super-duty steel spring nut to lock your connection securely while absorbing impact and eliminating distracting clank. Built from hot-dip zinc galvanized steel with stainless washers, this pin prioritizes durability and weather resistance for frequent road use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the SHP359 reduce noise and shock while towing?\u003c\/h3\u003e\n\u003cp\u003eThe SHP359 replaces traditional clevis or hitch clips with a threaded 5\/8-inch pin and internal spring nut that compresses under load. That mechanical interface removes the loose fit that causes clanking and transfers shock forces away from the hitch mouth, reducing sway and vibration without altering tow geometry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThreaded 5\/8-inch pin secures tightly in hollow 2\" receivers\u003c\/li\u003e\n  \u003cli\u003ePatented spring nut absorbs and dissipates impact loads\u003c\/li\u003e\n  \u003cli\u003eEliminates metal-on-metal play that causes noise\u003c\/li\u003e\n  \u003cli\u003eReduces periodic wear from repeated hitch impacts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this hitch pin fit my trailer or accessory?\u003c\/h3\u003e\n\u003cp\u003eThe SHP359 fits standard 2-inch hitch receivers that accept a 5\/8-inch pin, but it requires a hollow shank on the tow device—solid shank tubes are incompatible. Verify your accessory or adapter is hollow and rated for Class IV loads if you plan to tow at higher capacities.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 2\" receiver tubes with hollow shank design\u003c\/li\u003e\n  \u003cli\u003eUses a 5\/8\" threaded pin size for common tow accessories\u003c\/li\u003e\n  \u003cli\u003eSuitable for tow ratings up to Class IV (12,000 lbs max)\u003c\/li\u003e\n  \u003cli\u003eNot compatible with solid shank (non-hollow) tow bars or adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant is the SHP359?\u003c\/h3\u003e\n\u003cp\u003eDurability is a focus: the pin and nut assembly use hot-dip zinc galvanization for broad corrosion protection and stainless washers at contact points to minimize rust where it matters. The construction is intended for regular towing and long-term outdoor exposure while maintaining function.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHot-dip zinc galvanized steel resists rust and chipping\u003c\/li\u003e\n  \u003cli\u003eStainless washers reduce friction and corrosion at mating surfaces\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty materials support repeated installation and removal\u003c\/li\u003e\n  \u003cli\u003eTransferable between compatible hollow 2\" devices for long-term use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and remove the SHP359 safely?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: slide the threaded pin through the receiver and accessory, then engage the spring nut in the hollow shank and tighten until snug. Removal reverses the process; always park on level ground and use proper vehicle restraints before working on the hitch.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlign receiver and accessory, insert the 5\/8\" threaded pin\u003c\/li\u003e\n  \u003cli\u003eCompress the spring nut inside the hollow shank to lock\u003c\/li\u003e\n  \u003cli\u003eTighten until secure but avoid overtightening threads\u003c\/li\u003e\n  \u003cli\u003eRemove by backing out the threaded pin while supporting the load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? The Let's Go Aero SHP359 is aimed at owners of trucks, SUVs, and towing rigs who use 2-inch hollow hitch receivers and want a quieter, more stable connection. It’s ideal for frequent haulers, RV owners, fishermen, and contractors who want to reduce hitch noise and absorb shock loads without replacing their hitch or receiver. If your tow device has a solid shank, this unit won’t fit; otherwise it offers an easy upgrade to reduce clatter, minimize wear, and extend component life during regular towing duties.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can SHP359 be used on solid shank tow bars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The SHP359 requires a hollow shank tube; it will not work with solid shank tow bars.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What maximum load rating does this pin support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The SHP359 fits Class IV setups and supports tow ratings up to 12,000 lbs maximum.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Let's Go Aero","offers":[{"title":"Default Title","offer_id":48086155264158,"sku":"B00DJBGBF0","price":48.34,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/lets-go-aero-front-packaging-and-pin.jpg?v=1785887203","url":"https:\/\/northtrailauto.ca\/products\/lets-go-aero-silent-hitch-pin-for-2-inch-receivers-shp359-metallic-5-8-inch-threaded-zinc-galvanized","provider":"North Trail Auto","version":"1.0","type":"link"}