{"product_id":"ligbt-4-inch-red-led-trailer-tail-lights-4-pack-ip67-sealed-dual-intensity-stop-turn-running","title":"LIGBT 4-Inch Red LED Trailer Tail Lights 4-Pack — IP67 Sealed, Dual-Intensity Stop\/Turn\/Running","description":"\u003cp\u003e\u003cstrong\u003eLIGBT 4-inch round red LED trailer tail lights are a 4-piece set of IP67-sealed stop\/turn\/brake and running lights designed to deliver brighter, longer-lasting illumination for trailers and utility vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese compact LEDs replace standard incandescent round lamps with a low-current, high-output solution built for outdoor use. Each lamp packs multiple upgraded Piranha-style LEDs into a sealed housing that limits moisture intrusion and improves heat handling. The lights run on 12–24V DC systems and use a three-wire hookup for brake\/turn and running-light functions, making them straightforward to install on most trailers and commercial vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these lights improve visibility on the road?\u003c\/h3\u003e\n\u003cp\u003eThe dense LED array gives a stronger, faster-responding light than traditional bulbs, making braking and turning signals easier to notice. The lamp design also provides a wider beam spread so other drivers can see signals from different angles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e16 upgraded Piranha LEDs per unit for higher brightness and quicker response\u003c\/li\u003e\n  \u003cli\u003eDual-intensity output: separate circuits for high (stop\/turn) and low (running) modes\u003c\/li\u003e\n  \u003cli\u003eWider lighting angle for better side and rear visibility\u003c\/li\u003e\n  \u003cli\u003eDraws less current, reducing load on vehicle wiring and batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes these lights durable and weather-resistant?\u003c\/h3\u003e\n\u003cp\u003eEach housing is heavily silicon-sealed and rated to withstand rain, splashes, and road grime without letting moisture reach the LEDs. The construction emphasizes thermal management and a rugged lens to resist cracking or fogging under normal road conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP67-rated sealing protects against dust and temporary water immersion (do not use submerged)\u003c\/li\u003e\n  \u003cli\u003eImproved heat dissipation extends LED life and preserves brightness\u003c\/li\u003e\n  \u003cli\u003eRobust housing and lens resist impact and environmental wear\u003c\/li\u003e\n  \u003cli\u003eDesigned for repeated outdoor exposure across seasons\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is the installation on trailers and trucks?\u003c\/h3\u003e\n\u003cp\u003eWiring follows a three-conductor method: ground, high-intensity (stop\/turn), and low-intensity (running). The lights include three mounting holes for secure fastening; basic hand tools and a matching hole pattern are all that's required for most installs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree-wire hookup: black = ground, red = high\/stop\/turn, blue = low\/running\u003c\/li\u003e\n  \u003cli\u003eOutline diameter ~5.3\" with a luminous face about 4\" — verify hole size before cutting\u003c\/li\u003e\n  \u003cli\u003eThree mounting holes around the rim for secure attachment\u003c\/li\u003e\n  \u003cli\u003eCompatible with 12–24V DC systems used on many trailers and commercial vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these lights fit my vehicle or trailer application?\u003c\/h3\u003e\n\u003cp\u003eThe lamps were built for broad compatibility across trailers, trucks, and other work vehicles that accept round 4–5\" tail fixtures and run on 12–24V circuits. Confirm the vehicle’s hole diameter and wiring configuration to ensure a proper match before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with semi-trailers, utility trailers, pickup trucks, boat trailers, buses, service vans, and more\u003c\/li\u003e\n  \u003cli\u003eIdeal for both commercial fleets and personal trailers needing reliable signaling\u003c\/li\u003e\n  \u003cli\u003eUniversal electrical compatibility with standard 12–24V DC vehicle systems\u003c\/li\u003e\n  \u003cli\u003eMeasure existing fixture opening to confirm fit (outline diameter ≈ 5.3\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These LIGBT 4-inch red LED tail lights are suited for fleet managers, trailer owners, and DIY vehicle owners who need brighter, longer-lived signaling lights that tolerate weather and reduce electrical load. They are particularly useful when upgrading from incandescent fixtures or replacing worn or water-damaged round tail lamps on trailers, trucks, and utility vehicles. Note: they are designed for exterior use but should not be submerged continuously.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lights waterproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they are heavily silicon-sealed with an IP67 rating for dust and temporary water immersion; avoid continuous underwater use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these work on 24V systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the lights are compatible with 12–24V DC electrical systems common on trailers and commercial vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"LIGBT","offers":[{"title":"Default Title","offer_id":48086471049374,"sku":"B0DKJTD7QV","price":43.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/ligbt-front-view-red-led-trailer-light.jpg?v=1785898855","url":"https:\/\/northtrailauto.ca\/products\/ligbt-4-inch-red-led-trailer-tail-lights-4-pack-ip67-sealed-dual-intensity-stop-turn-running","provider":"North Trail Auto","version":"1.0","type":"link"}