{"product_id":"lisle-pitman-arm-puller-for-ford-f250-f350-41970-heavy-duty-forged-heat-treated-jaws","title":"Lisle Pitman Arm Puller for Ford F250\/F350 (41970) — Heavy-Duty Forged, Heat-Treated Jaws","description":"\u003cp\u003e\u003cstrong\u003eThe Lisle 41970 is a heavy-duty pitman arm puller engineered to remove the large pitman arms on 2005-and-later Ford F250 and F350 trucks quickly and safely.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned specifically for the larger steering components found on Ford Super Duty trucks, this puller combines forged, heat-treated jaws with a robust center screw to provide controlled, reliable extraction. It fits pitman arm openings up to 1.70 inches and has an inside length of 2 5\/8 inches, a width of 3.08 inches, and an overall length of 3 9\/16 inches, making it an exacting fit for heavy-duty removal tasks without damaging surrounding parts.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this puller work on heavy-duty Ford pitman arms?\u003c\/h3\u003e\n\u003cp\u003eThe Lisle 41970 uses two hardened, forged jaws positioned under the pitman arm and a threaded center screw that applies steady force to separate the arm from its shaft. Because the jaws are heat-treated, they resist bending and spreading under load, giving you a safer, more predictable extraction compared with makeshift tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForged, heat-treated jaws for strength and durability.\u003c\/li\u003e\n  \u003cli\u003eTurn the center screw to apply controlled, centered force.\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for large Ford F250\/F350 pitman arm profiles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my truck and the pitman arm dimensions?\u003c\/h3\u003e\n\u003cp\u003eThe puller fits the larger pitman arms used on Ford F250 and F350 trucks from 2005 onward. Key fit measurements are a 1.70-inch opening, a 2 5\/8-inch inside length, 3.08-inch width, and a total length of 3 9\/16 inches—confirm these dimensions against your arm before use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOpening: 1.70 inches to engage the arm.\u003c\/li\u003e\n  \u003cli\u003eInside length: 2 5\/8 inches for arm thickness clearance.\u003c\/li\u003e\n  \u003cli\u003eWidth: 3.08 inches and overall length: 3 9\/16 inches for proper reach.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the Lisle 41970 more reliable than generic pullers?\u003c\/h3\u003e\n\u003cp\u003eUnlike inexpensive pullers that use stamped or weaker materials, this tool employs forged jaws and heat treatment to maintain grip and shape under heavy force. The center screw is engineered for steady, centered pressure so you reduce the chance of slippage or collateral damage to steering components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForged construction resists deformation under heavy loads.\u003c\/li\u003e\n  \u003cli\u003eHeat treatment preserves bite and longevity of the jaws.\u003c\/li\u003e\n  \u003cli\u003eCentered screw reduces risk of uneven pulling or part damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use this puller safely and effectively?\u003c\/h3\u003e\n\u003cp\u003ePosition the jaws beneath the pitman arm shoulder, align the center screw with the arm shaft, and turn the screw slowly while keeping the tool square to the arm. Use steady force, check for interference from boots or linkage, and protect surrounding components by clearing nearby fasteners and securing adjacent steering parts from movement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlace jaws fully under the pitman arm before tightening the center screw.\u003c\/li\u003e\n  \u003cli\u003eTurn the screw evenly; avoid sudden impacts or hammering on the tool.\u003c\/li\u003e\n  \u003cli\u003eInspect surrounding linkage and clear obstacles to prevent damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this tool is for: Automotive technicians, home mechanics, and fleet maintenance professionals who service Ford Super Duty trucks will benefit from the Lisle 41970. It’s ideal when you need a purpose-built, heavy-duty puller that fits the larger pitman arms found on 2005-and-later F250 and F350 models, offering a secure, long-lasting solution for steering-component removal without improvisation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Lisle 41970 fit all Ford F250\/F350 years?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is designed for 2005 and later Ford F250 and F350 pitman arms; verify your arm dimensions against the tool measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this puller on other truck brands?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It may fit similar large pitman arms, but confirm the 1.70-inch opening and other dimensions before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Lisle","offers":[{"title":"Default Title","offer_id":48083121406110,"sku":"B000ETWGKY","price":50.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/lisle-41970-front-view-puller.jpg?v=1785825558","url":"https:\/\/northtrailauto.ca\/products\/lisle-pitman-arm-puller-for-ford-f250-f350-41970-heavy-duty-forged-heat-treated-jaws","provider":"North Trail Auto","version":"1.0","type":"link"}