{"product_id":"loctite-flange-sealant-gasket-eliminator-pink-50-ml-tube-high-temp-65-to-400-f","title":"Loctite Flange Sealant Gasket Eliminator — Pink 50 mL Tube, High‑Temp (-65° to 400°F)","description":"\u003cp\u003e\u003cstrong\u003eLoctite 510 Pink Gasket Eliminator is a high-temperature flange sealant in a 50 mL tube designed to replace cut gaskets and create reliable, flexible seals on metal flanges from -65°F to 400°F.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis flange sealant is formulated to bond metal surfaces and cure into a resilient gasket-like material, eliminating the need for pre-cut gaskets in many assemblies. Its pink color helps with visual inspection, and the product is supplied in a convenient 50 mL tube sized for workshop or field use. Loctite engineered this formula for service where temperature extremes, shear loads, and tensile strength are concerns, while maintaining a manageable 24-hour cure profile under typical conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly does Loctite 510 cure and reach service strength?\u003c\/h3\u003e\n\u003cp\u003eTypical handling strength develops within hours, and a full cure is normally achieved in about 24 hours at room temperature. Actual cure time depends on bead thickness, substrate, and ambient conditions—thin films cure faster than thick sections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull cure: approximately 24 hours under standard conditions\u003c\/li\u003e\n  \u003cli\u003eBead thickness affects cure speed—thin beads cure sooner\u003c\/li\u003e\n  \u003cli\u003eTemperature and humidity can accelerate or slow curing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and operating temperatures is this sealant suitable for?\u003c\/h3\u003e\n\u003cp\u003eLoctite 510 bonds well to common metal substrates used in flanged connections and is intended for metallic assemblies rather than soft plastics. It is rated for extreme temperatures, allowing use across a broad service window without becoming brittle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible substrates: steel, cast iron, aluminum, and similar metals\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range: -65°F to 400°F (-54°C to 204°C)\u003c\/li\u003e\n  \u003cli\u003eNot primarily designed for flexible plastics or continuous immersion without testing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat mechanical performance can I expect from this gasket eliminator?\u003c\/h3\u003e\n\u003cp\u003eThe product delivers robust shear and tensile performance suitable for many industrial flange applications. Those figures help predict durability under load and the ability to maintain a seal under mechanical stress.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShear strength: approximately 725 psi for bonded metal joints\u003c\/li\u003e\n  \u003cli\u003eTensile strength: approximately 1085 psi\u003c\/li\u003e\n  \u003cli\u003eForms a flexible, pressure-resistant seal when fully cured\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I apply Loctite 510 for best results?\u003c\/h3\u003e\n\u003cp\u003eSurfaces should be clean, dry, and free of oil, grease, and old gasket material. Apply a uniform continuous bead to one flange face, assemble within recommended time, and allow to cure undisturbed; follow standard safety and handling guidance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrepare surfaces: remove contaminants and dry thoroughly\u003c\/li\u003e\n  \u003cli\u003eApply: dispense a consistent bead from the 50 mL tube onto the flange face\u003c\/li\u003e\n  \u003cli\u003eAssemble and torque to specification, then allow cure time before full pressurization\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Loctite 510 Pink 50 mL gasket eliminator is aimed at mechanics, maintenance technicians, and fabricators who need a reliable high-temperature flange sealant that replaces conventional gaskets in many metal-to-metal applications. It’s useful for shop work, field repairs, and equipment maintenance where temperature tolerance, mechanical strength, and a neat, inspectable seal are important. If you require a small, serviceable tube for occasional repairs or bench work, this 50 mL size balances usability with shelf-life considerations.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eModel Number: HL135538\u003c\/li\u003e\n  \u003cli\u003ePackage dimensions: 6.61\" length × 2.01\" width × 0.98\" height\u003c\/li\u003e\n  \u003cli\u003eTube volume: 50 mL\u003c\/li\u003e\n  \u003cli\u003eColor: pink for visual verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can Loctite 510 be used on wet surfaces?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—surfaces should be clean and dry; moisture can inhibit adhesion and extend cure time.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Loctite 510 suitable for continuous high-heat exposure?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—it's rated for -65°F to 400°F, appropriate for many high-temperature flange applications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Loctite","offers":[{"title":"Default Title","offer_id":48084642168990,"sku":"B0000DD2YP","price":37.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/loctite-510-front-tube.jpg?v=1785861416","url":"https:\/\/northtrailauto.ca\/products\/loctite-flange-sealant-gasket-eliminator-pink-50-ml-tube-high-temp-65-to-400-f","provider":"North Trail Auto","version":"1.0","type":"link"}