{"product_id":"logol-tire-valve-stem-quick-replacement-tool-kit-51025","title":"LOGOL Tire Valve Stem Quick Replacement Tool Kit（51025）","description":"\u003cp\u003e\u003cstrong\u003eLOGOL Tire Valve Stem Quick Replacement Tool Kit (51025) is a compact set that lets you swap leaking rubber valve stems through the rim hole quickly—no tire removal required.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf a slow leak is coming from a worn valve stem, this kit provides the tools to extract and install a new stem through an 11.3 mm (0.453 inch) rim hole. The tools are engineered for speed and repeatability so a practiced user can complete a valve swap in roughly 15 seconds. Note that this kit is not compatible with tire pressure monitoring system (TPMS) sensors; it’s designed for conventional rubber snap-in valve stems on wheels with the specified hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the LOGOL kit let me change a valve without removing the tire?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit uses a pull-and-seat method: a tool grips the new valve stem or the old core and pulls it into place through the rim hole while sealing the bead remains intact. Because the rim hole size matches the tool geometry, the stem slides into position and snaps into the rim from the outside.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWorks through 11.3 mm (0.453 in) rim holes for snap-in rubber stems\u003c\/li\u003e\n  \u003cli\u003eTool shapes set and guide the stem for a clean seat\u003c\/li\u003e\n  \u003cli\u003eNo need to break the bead or dismount the tire in most cases\u003c\/li\u003e\n  \u003cli\u003eRapid operation suitable for quick roadside or shop repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and rims are compatible with the 51025 kit?\u003c\/h3\u003e\n\n\u003cp\u003eThis set targets wheels that accept standard 11.3 mm (0.453 in) snap-in valve stems — a common size on many passenger cars, light trucks, trailers and aftermarket wheels. It will not work on wheels that require metal valves for TPMS or on rims with unusual hole sizes.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits most passenger vehicles and light-duty wheels with 11.3 mm holes\u003c\/li\u003e\n  \u003cli\u003eNot suitable for wheels equipped with TPMS sensors or valve-mounted TPMS\u003c\/li\u003e\n  \u003cli\u003eCheck your rim hole diameter before purchase to confirm fit\u003c\/li\u003e\n  \u003cli\u003eWorks with standard rubber snap-in valve stem replacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow fast and reliable is the valve change process with this tool kit?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit is built for quick, repeatable swaps: each tool performs a single function so users can become efficient after a few uses. With practice, a valve replacement can take as little as 15 seconds; the materials and geometry were refined by engineers to ensure consistent seating of the stem.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned for one-step pulling\/setting operations per tool\u003c\/li\u003e\n  \u003cli\u003eEngineered material and structure for dependable performance\n  \u003c\/li\u003e\n  \u003cli\u003eIdeal for technicians, mobile repair, and DIY roadside fixes\u003c\/li\u003e\n  \u003cli\u003eSpeed increases with familiarity and correct rim match\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I watch out for when using this kit?\u003c\/h3\u003e\n\n\u003cp\u003eAlways verify rim hole diameter and the absence of TPMS requirements before attempting a quick swap. Use the correct replacement valve stem type and inspect the wheel and tire for other damage; incorrect use may damage a TPMS sensor or fail to seal if the stem type is wrong.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConfirm rim hole is 11.3 mm (0.453 in) before use\u003c\/li\u003e\n  \u003cli\u003eDo not use on TPMS-equipped wheels or metal valve applications\u003c\/li\u003e\n  \u003cli\u003eInspect the rim edge and valve seat for damage prior to installation\u003c\/li\u003e\n  \u003cli\u003eFollow safe procedures for supporting the wheel and deflating the tire\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The LOGOL 51025 quick valve change kit is aimed at mobile mechanics, fleet technicians, tire shop staff, and handy vehicle owners who need a fast, practical solution for replacing rubber valve stems without demounting tires. If you work on many wheels of compatible size and value speed and repeatability, this compact kit will reduce repair time and improve workflow; if your wheels use TPMS sensors or nonstandard valve sizes, choose a TPMS-compatible tool instead.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit work with TPMS-equipped wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The 51025 kit is not compatible with wheels that have TPMS sensors or metal valve assemblies.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What rim hole size does the LOGOL kit fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits rims with an 11.3 mm (0.453 inch) valve hole designed for snap-in rubber stems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"LOGOL","offers":[{"title":"Default Title","offer_id":48086836117662,"sku":"B0DQ4PBY4C","price":33.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/logol-front-package-51025.jpg?v=1785907332","url":"https:\/\/northtrailauto.ca\/products\/logol-tire-valve-stem-quick-replacement-tool-kit-51025","provider":"North Trail Auto","version":"1.0","type":"link"}