{"product_id":"meguiars-heavy-cut-cleaner-m04-paint-correction-compound-16-oz-bottle-fast-cutting-breaks-down-to-fine-polish","title":"Meguiar's Heavy Cut Cleaner M04 Paint Correction Compound 16 oz Bottle — Fast Cutting, Breaks Down to Fine Polish","description":"\u003cp\u003e\u003cstrong\u003eMeguiar's Mirror Glaze Heavy Cut Cleaner M04 is a professional-grade, fast-cutting paint correction compound engineered to remove heavy swirls, scratches, oxidation and clear coat defects while breaking down to a finer polish for a refined gloss.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen paint has deep marring from weathering, sanding or aggressive contaminants, a one-step, aggressive cleaner is required to restore surface integrity before finishing. Meguiar's M04 uses a diminishing abrasive system that begins with strong cutting action and transitions into a finer buffing rouge, making it suitable for major defect removal yet capable of producing a smoother finish when worked out properly with a rotary polisher. The formula is buffered to help lubricate and protect the paint during correction and is silicone-free, making it a reliable preparatory product for paint repair or refinishing work.\u003c\/p\u003e\n\n\u003ch3\u003eHow does M04 tackle heavy swirls and scratches?\u003c\/h3\u003e\n\u003cp\u003eM04 is formulated with coarse abrasive particles that efficiently shear away oxidized layers and deep swirl marks. As you work the product, the abrasives degrade into smaller, polishing-grade particles to reduce micro-marring and reveal clearer color and gloss.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStarts with aggressive cutting action for rapid defect removal\u003c\/li\u003e\n  \u003cli\u003eBreaks down into a finer polishing phase to lessen residual haze\u003c\/li\u003e\n  \u003cli\u003eBuffered abrasives improve glide and reduce heat buildup\u003c\/li\u003e\n  \u003cli\u003eDesigned for rotary buffers to maximize correction speed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this safe for my car's clear coat and older finishes?\u003c\/h3\u003e\n\u003cp\u003eYes — M04 is body-shop safe and compatible with all glossy factory clear coats as well as older lacquer and enamel finishes when used correctly. Because it's aggressive, testing on an inconspicuous panel is recommended and proper pad selection and technique lower the risk of overcutting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFormulated for clear coats and traditional paints\u003c\/li\u003e\n  \u003cli\u003eBuffered to minimize scouring and scratching\u003c\/li\u003e\n  \u003cli\u003eSilicone-free finish makes it ideal for follow-up paint prep\u003c\/li\u003e\n  \u003cli\u003eBest results with a rotary polisher and recommended pads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and method give the best results with M04?\u003c\/h3\u003e\n\u003cp\u003eM04 performs optimally with a rotary buffer using medium to heavy-cut wool or foam cutting pads. Apply a small amount to the pad, work at moderate speed and pressure, and finish with a finer pad or follow-up polish to refine the surface if you want a higher gloss.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse a rotary polisher for maximum cutting power\u003c\/li\u003e\n  \u003cli\u003eStart with medium\/heavy cutting pads, then switch to finishing pads\u003c\/li\u003e\n  \u003cli\u003eWork in small sections and wipe residue with a microfiber towel\u003c\/li\u003e\n  \u003cli\u003eTest and adjust speed\/pressure to avoid overworking the paint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I integrate M04 into a full paint-restoration workflow?\u003c\/h3\u003e\n\u003cp\u003eConsider M04 the heavy-correction stage in a multi-step restoration. After cutting out defects, follow with a mid-level polish to remove haze, then finish with a fine polish or sealant for protection and shine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStage 1: M04 for heavy defect removal\u003c\/li\u003e\n  \u003cli\u003eStage 2: Medium polish to clear diminishing-abrasive residue\u003c\/li\u003e\n  \u003cli\u003eStage 3: Fine polish or glaze for maximum gloss\u003c\/li\u003e\n  \u003cli\u003eStage 4: Apply paint sealant or wax for long-term protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Meguiar's Mirror Glaze Heavy Cut Cleaner M04 is aimed at experienced detailers, body-shop technicians and committed DIY enthusiasts who need a powerful, professional correction compound. If you're tackling severe oxidation, deep swirls, etching or aged lacquer\/enamel finishes and you have access to a rotary polisher and proper pads, M04 delivers fast, reliable cutting action and a cleaner finish suitable for subsequent polishing and protection steps. For lighter defects or novice users, consider testing on a small area or choosing a milder compound first.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use M04 on clear coat without damaging it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — M04 is body-shop safe for clear coats when used correctly; test a small area and use proper pads and technique.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a rotary polisher to use this product?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: For best and fastest results, use a rotary polisher; it’s formulated specifically for rotary correction work.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Meguiar's","offers":[{"title":"Default Title","offer_id":48086822453406,"sku":"B0002SQVF8","price":30.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/meguiars-m04-front-label-bottle.jpg?v=1785906710","url":"https:\/\/northtrailauto.ca\/products\/meguiars-heavy-cut-cleaner-m04-paint-correction-compound-16-oz-bottle-fast-cutting-breaks-down-to-fine-polish","provider":"North Trail Auto","version":"1.0","type":"link"}