{"product_id":"moebulb-cv-axle-removal-kit-2-piece-axle-popper-forks-gold-plated-forged-steel-for-fwd-up-to-2","title":"MOEBULB CV Axle Removal Kit 2‑Piece Axle Popper Forks, Gold‑Plated Forged Steel for FWD up to 2\"","description":"\u003cp\u003e\u003cstrong\u003eMOEBULB 12020 Axle Popper Kit is a two-piece forged-steel CV axle removal fork set that safely pops stuck inner half-shafts from most front-wheel-drive transaxles without damaging seals or housings.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis 2-piece set includes a tapered wedge fork and a full-thickness shim fork, engineered to work together to separate stubborn CV axles from the transmission quickly and with controlled force. Built from high-strength one-piece forged steel, laser-cut and gold-plated for corrosion resistance, the tools are sized to fit axles up to 2 inches in diameter and are intended for professional technicians and DIY mechanics who need a dependable, non-destructive solution for frozen or hard-to-remove half-shafts.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the wedge-and-shim combination make axle removal easier?\u003c\/h3\u003e\n\u003cp\u003eThe wedge fork gradually increases the gap between the axle and transmission lip while the shim fork fills larger clearances to keep pressure even. Using both tools in sequence helps to avoid sudden pops and reduces risk to seals or transmission housing edges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWedge fork: tapered edge forces a controlled separation.\u003c\/li\u003e\n  \u003cli\u003eShim fork: full-thickness support for wider gaps.\u003c\/li\u003e\n  \u003cli\u003eEven pressure: forks apply force symmetrically to avoid bending or jumping.\u003c\/li\u003e\n  \u003cli\u003eFits axles up to 2 inches diameter; check axle size before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this set damage axle seals, transmission, or surrounding parts?\u003c\/h3\u003e\n\u003cp\u003eThe forks are designed to apply pressure evenly on both sides of the shaft, unlike single-sided pry bars that can jump or lever against seals. When used properly—tapping the handle to drive the wedge and then switching to the shim—the tools minimize contact with delicate surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFork design reduces leverage points that harm seals.\u003c\/li\u003e\n  \u003cli\u003eOne-piece forged construction resists bending under repeated strikes.\u003c\/li\u003e\n  \u003cli\u003eGold plating helps prevent corrosion that could transfer to components.\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle service procedures and protect exposed seals as needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the MOEBULB axle popper kit safely and effectively?\u003c\/h3\u003e\n\u003cp\u003ePosition the tapered wedge fork between the trans housing and axle splines, then strike the fork handle with a hammer to coax the axle outward. If the gap becomes large enough, swap in the shim fork to maintain a uniform pull until the axle clears the trans.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm axle diameter is within the 2-inch working opening.\u003c\/li\u003e\n  \u003cli\u003eStart with the wedge fork to open a gradual gap.\u003c\/li\u003e\n  \u003cli\u003eUse the shim fork to hold wider gaps and continue even pulling.\u003c\/li\u003e\n  \u003cli\u003eWear eye protection and follow standard safety\/vehicle support procedures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the materials, dimensions, and durability features?\u003c\/h3\u003e\n\u003cp\u003eBoth forks are made from high-strength forged steel, manufactured as one piece, laser cut for precision, and finished with gold electroplating for corrosion resistance. Each fork measures 14 x 3 x 0.55 inches and the set weighs about 3.3 pounds—sturdy enough for repeated shop use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: hardened forged steel for high strength and hardness.\u003c\/li\u003e\n  \u003cli\u003eFinish: gold electroplated for corrosion protection.\u003c\/li\u003e\n  \u003cli\u003eDimensions: 14 x 3 x 0.55 inches; fork opening width 2 inches.\u003c\/li\u003e\n  \u003cli\u003ePackage: includes one wedge fork and one shim fork (2 pieces).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The MOEBULB 12020 Axle Popper Kit is ideal for professional mechanics, mobile technicians, and experienced DIYers working on front-wheel-drive vehicles who need a fast, non-destructive way to remove frozen inner CV axles. If you regularly service FWD half-shafts or want a reliable backup tool to avoid costly transmission or seal damage, this durable two-piece fork set provides a compact, shop-ready solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the MOEBULB kit fit my axle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The fork opening fits axles up to 2 inches in diameter; measure your inner axle before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these forks bend under heavy use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are one-piece forged steel and laser cut for strength; proper use prevents bending.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MOEBULB","offers":[{"title":"Default Title","offer_id":48085334392990,"sku":"B0DDK847XF","price":39.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/moebulb-front-view-axle-popper-kit.jpg?v=1785869178","url":"https:\/\/northtrailauto.ca\/products\/moebulb-cv-axle-removal-kit-2-piece-axle-popper-forks-gold-plated-forged-steel-for-fwd-up-to-2","provider":"North Trail Auto","version":"1.0","type":"link"}