{"product_id":"moto1988-fuel-valve-petcock-kit-for-polaris-right-exit-complete-replacement-with-lever-spring","title":"MOTO1988 Fuel Valve Petcock Kit for Polaris — Right-Exit Complete Replacement with Lever \u0026 Spring","description":"\u003cstrong\u003eMOTO1988 Fuel Valve Petcock and Lever Spring Kit is a full replacement assembly for right-exit fuel petcock systems on many Polaris ATVs, delivered with lever, spring, screw and washer for a complete swap.\u003c\/strong\u003e\n\nThis kit replaces worn or leaking fuel valves on a wide range of Polaris models from early 1990s Trail Boss and Big Boss machines through later Scrambler and Scrambler 500, simplifying repairs by providing the right-exit petcock, fuel lever, lever extender, spring, screw and washer in one package. It is sold as an aftermarket replacement that corresponds to OEM number 7051006 and cross-references several common replacement part numbers so you can match it to your original assembly.\n\n\u003ch3\u003eWhich Polaris models does this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed for numerous Polaris ATVs produced primarily in the 1990s and early 2000s. Fitment covers 300 and 400L models, multiple Trail Boss and Trail Blazer variants, Big Boss and Magnum models, Scrambler machines including the 500, and several Sportsman configurations. Always compare the OEM or old part number to ensure compatibility before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExamples: Polaris Trail Blazer 250 (1992–2006), Trail Boss 250 series (1991–1999)\u003c\/li\u003e\n  \u003cli\u003eIncludes Big Boss 250\/300\/350L\/400L 6x6 variants (early-mid 1990s)\u003c\/li\u003e\n  \u003cli\u003eSupports Scrambler 400\/500 and Sportsman 400 series where right-exit petcock was used\u003c\/li\u003e\n  \u003cli\u003eMatches manufacturer part 7051006; replaces 7051002, 7051014, 7052046, 5431391 and others\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat exactly is included in the package and why it matters?\u003c\/h3\u003e\n\u003cp\u003eThis is a complete replacement kit assembled to replace the entire right-exit fuel valve system, not just a single seal or lever. Receiving all required small parts reduces the chances of missing hardware during the swap and speeds up installation in the field or workshop. It’s intended to be a like-for-like replacement for older or damaged petcocks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x right-exit fuel valve petcock body — main fuel control piece\u003c\/li\u003e\n  \u003cli\u003e1x fuel lever extender and 1x fuel lever — for correct actuation and reach\u003c\/li\u003e\n  \u003cli\u003e1x lever spring, 1x screw and 1x washer — hardware to secure and tension the lever\u003c\/li\u003e\n  \u003cli\u003eComplete kit avoids extra trips for missing fasteners or springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is moderately straightforward for anyone comfortable working on small engine fuel systems. Typical steps include draining fuel, removing the old petcock, transferring or replacing fuel lines, and securing the new assembly with provided hardware. If you can use basic hand tools and follow a simple fuel-safety checklist, you can complete the swap in a short afternoon.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic tools: flathead\/phillips screwdriver, pliers, wrench set\u003c\/li\u003e\n  \u003cli\u003eRecommended: small container to catch fuel and clean rags for spills\u003c\/li\u003e\n  \u003cli\u003eFollow safety: work in a ventilated area, disconnect battery if needed\u003c\/li\u003e\n  \u003cli\u003eRefer to OEM numbers and photos to confirm orientation before tightening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this part compare to OEM and what should I check before buying?\u003c\/h3\u003e\n\u003cp\u003eThis aftermarket kit purposefully mirrors OEM 7051006 and lists multiple replacement part numbers it is compatible with. Quality can vary between suppliers, so inspect fitment details, picture orientation and the cross-reference numbers against your current petcock. If your bike used a left-exit petcock or a different mounting pattern, this right-exit assembly will not fit without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM reference: 7051006 — verify against your old part number\u003c\/li\u003e\n  \u003cli\u003eCross-replacements include 5431391, 7051002 and others — check these too\u003c\/li\u003e\n  \u003cli\u003eConfirm right-exit configuration and mounting flange match your tank\u003c\/li\u003e\n  \u003cli\u003eKeep old part until new unit is confirmed to fit and seal properly\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for?\n\nThis MOTO1988 fuel valve and lever spring kit is aimed at ATV owners, hobby mechanics and small repair shops maintaining older Polaris machines that use a right-exit petcock. It’s suitable for anyone restoring or keeping a trail-ready ATV where OEM petcocks have become brittle, clogged or leaky. If you want a single-box replacement with the lever, spring and mounting hardware included and you match the OEM\/cross-reference numbers, this kit helps get your fuel system back to service quickly.\n\n\u003cp\u003e\u003cem\u003ePre-buy tip:\u003c\/em\u003e compare the photos and OEM numbers on your existing unit to the listed references before ordering. For questions, contact the seller for clarification — most purchases include customer support and a limited product service period.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit replace OEM part 7051006?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, this aftermarket kit corresponds to OEM 7051006 and lists multiple compatible replacement numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it fit a left-exit fuel tank?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, this kit is a right-exit petcock; confirm your tank orientation before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MOTO1988","offers":[{"title":"Default Title","offer_id":48085657682078,"sku":"B0CFLV946S","price":42.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/moto1988-petcock-front-assembly_178322e0-e060-4459-9c3f-223ab37583ab.jpg?v=1785876532","url":"https:\/\/northtrailauto.ca\/products\/moto1988-fuel-valve-petcock-kit-for-polaris-right-exit-complete-replacement-with-lever-spring","provider":"North Trail Auto","version":"1.0","type":"link"}