{"product_id":"moto1988-tie-rod-end-kit-for-yamaha-atvs-direct-fit-for-big-bear-grizzly-wolverine-complete-4-piece-steering-set","title":"MOTO1988 Tie Rod End Kit for Yamaha ATVs — Direct-Fit for Big Bear\/Grizzly\/Wolverine (Complete 4‑Piece Steering Set)","description":"\u003cp\u003e\u003cstrong\u003eMOTO1988 tie rod end kit replaces worn steering linkages on compatible Yamaha ATVs to restore tight, predictable steering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis complete steering repair kit includes two tie rods plus left and right tie rod ends designed to match several Yamaha four-wheeler models and OEM part numbers. Built to fit direct-replacement specs, the set simplifies steering maintenance after wear, damage, or contamination has reduced steering feel. Read on for fit notes, installation benefits, maintenance tips, and who should consider this kit.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Yamaha models and part numbers does this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is engineered for a broad range of Yamaha models from the early 2000s through 2012. Cross-reference the OEM and replacement numbers before ordering to ensure compatibility with your ATV’s steering assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: YFM400 Big Bear 2000–2012, YFM350 Bruin 2004–2006, YFM350 Grizzly 2007–2011\u003c\/li\u003e\n  \u003cli\u003eAlso fits: YFM400 Grizzly 2007–2008 (4WD), YFM450 Grizzly 2007–2012 (4WD)\u003c\/li\u003e\n  \u003cli\u003eWolverine \u0026amp; Kodiak coverage: YFM350 Wolverine 2006–2009 (2WD), YFM450 Wolverine 2006–2010 (4WD), YFM400\/450 Kodiak 2003–2006\u003c\/li\u003e\n  \u003cli\u003eManufacturer part: 37S-23841-00-00; replacement references included in product details\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installing this tie rod kit improve steering performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn tie rods and ends removes play in the steering linkage, returning more precise handling and reducing wandering or uneven tire wear. The new components restore the original pivot geometry so the front wheels track as intended across rough terrain. Proper installation eliminates clunking noises and improves driver confidence at speed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemoves steering slop caused by worn ball joints and threads\u003c\/li\u003e\n  \u003cli\u003eReduces tire wear by restoring alignment stability\u003c\/li\u003e\n  \u003cli\u003eStops steering clunks and inconsistent return-to-center behavior\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and are the parts ready to install?\u003c\/h3\u003e\n\u003cp\u003eThe package contains the full set required for a two-side replacement: two tie rods plus two left and two right tie rod ends. Parts arrive pre-assembled where applicable and matched to fit the listed Yamaha models, but professional or experienced DIY installation is recommended for safe alignment and torque accuracy.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contents: 2 tie rods, 2 right tie rod ends, 2 left tie rod ends\u003c\/li\u003e\n  \u003cli\u003eMatched to OEM numbers for direct replacement; verify fit before installation\u003c\/li\u003e\n  \u003cli\u003eFollow proper torque specs and have a post-repair wheel alignment performed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I maintain the new tie rod ends to extend service life?\u003c\/h3\u003e\n\u003cp\u003eRoutine inspection and occasional greasing (if grease fittings are present) will prolong component life and performance. Keep contaminants like mud and water from pooling on joints, and check for play after heavy use or impacts. Replacing dust seals or boots promptly will also prevent premature wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect boots and joint seals after every trail ride or seasonal use\u003c\/li\u003e\n  \u003cli\u003eRegrease fittings when available and remove built-up grime\u003c\/li\u003e\n  \u003cli\u003eRe-check steering alignment after off-road impacts or rough rides\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This MOTO1988 tie rod end kit is intended for Yamaha ATV owners, mechanics, or restoration projects needing a direct-fit steering linkage replacement for Big Bear, Bruin, Grizzly, Wolverine, and Kodiak models listed above. It suits DIYers comfortable with suspension work and shops performing routine steering repairs. Verify OEM or replacement numbers against your machine prior to purchase; contact customer support for compatibility questions or installation guidance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit my Yamaha Grizzly 450?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits YFM450 Grizzly 2007–2012 4WD when OEM numbers match; verify before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are alignment and hardware included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes tie rods and left\/right ends; wheel alignment and special hardware are not included.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MOTO1988","offers":[{"title":"Default Title","offer_id":48082977161374,"sku":"B0CVTTKDYT","price":55.93,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/moto1988-front-packaging-tie-rod-kit.jpg?v=1785821418","url":"https:\/\/northtrailauto.ca\/products\/moto1988-tie-rod-end-kit-for-yamaha-atvs-direct-fit-for-big-bear-grizzly-wolverine-complete-4-piece-steering-set","provider":"North Trail Auto","version":"1.0","type":"link"}