{"product_id":"motorevo-front-brake-kit-for-toyota-corolla-2009-2019-1-8l-fit-275mm-geomet-coated-drilled-slotted-rotors-pads","title":"Motorevo Front Brake Kit for Toyota Corolla 2009–2019 (1.8L fit) — 275mm Geomet Coated Drilled \u0026 Slotted Rotors + Pads","description":"\u003cp\u003e\u003cstrong\u003eMOTOREVO Front Brake Kit is a complete replacement set of drilled-and-slotted 275mm rotors plus pads engineered for Toyota Corolla models 2009–2018 and 2019 models with the 1.8L engine.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit includes two geomet-coated, drilled and slotted 275mm (10.8 in) front rotors and four compatible brake pads with hardware, designed to be a direct-fit replacement for most Corolla model years listed. The rotors use a high-carbon US G3000 alloy and a corrosion-resistant Geomet finish, while the pads are matched to the rotor characteristics for consistent bedding and braking feel. Motorevo backs the set with a 12-year warranty and provides components intended for straightforward installation without additional machining or modification.\u003c\/p\u003e\n\n\u003ch3\u003eWill these parts fit my Corolla and which model years are covered?\u003c\/h3\u003e\n\u003cp\u003eThese rotors and pads are manufactured for front-wheel fitment on Toyota Corolla vehicles from 2009 through 2018 across all factory engine options. For 2019, compatibility is limited to Corolla models equipped with the 1.8L engine; they are not compatible with 2019 Corolla 2.0L variants. Verify rotor diameter and factory part numbers for exact match before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: 2009–2018 Corolla (all models and engines)\u003c\/li\u003e\n  \u003cli\u003eCompatible: 2019 Corolla with 1.8L engine only\u003c\/li\u003e\n  \u003cli\u003eRotor diameter: 275mm (10.8 in)\u003c\/li\u003e\n  \u003cli\u003eNot compatible with 2019 Corolla 2.0L engine models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the drilled-and-slotted Geomet rotors improve braking performance?\u003c\/h3\u003e\n\u003cp\u003eThe drilled and slotted pattern helps vent heat and clear gas and debris from the pad surface for more consistent contact under load. The Geomet coating guards against corrosion, preserving rotor lifespan and maintaining reliable performance in wet or salty conditions. Combined with high-carbon G3000 material, the design aims to reduce fade and maintain stopping power over repeated use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrilled holes and slots for heat and gas dissipation\u003c\/li\u003e\n  \u003cli\u003eGeomet anti-corrosion finish extends rotor life\u003c\/li\u003e\n  \u003cli\u003eHigh-carbon G3000 alloy for stability under thermal stress\u003c\/li\u003e\n  \u003cli\u003eMatched pad compound for consistent bite and wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and how difficult is installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with two front rotors (part #31505), four brake pads (P-D1210-8330), and the necessary hardware for reassembly. The components are precision-machined for a direct-replace fit, so in most cases you can remove the old parts and install the new kit without additional machining or part swaps. Typical DIY installation or a routine service bay job can be completed in under an hour per axle depending on tools and experience.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes: 2 rotors, 4 pads, mounting hardware\u003c\/li\u003e\n  \u003cli\u003eDirect-fit replacement—no extra parts needed in most cases\u003c\/li\u003e\n  \u003cli\u003eInstallation time: often under one hour per side for experienced technicians\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle torque specs and bedding procedures after install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and supported are Motorevo rotors and pads?\u003c\/h3\u003e\n\u003cp\u003eMotorevo designs these components from a high-carbon alloy and applies quality-control testing to meet or exceed typical OEM standards. The listed 12-year warranty reflects confidence in materials and manufacturing, and the Geomet coating helps prevent rust that can degrade braking surfaces over time. While wear depends on driving style and conditions, the materials and design target improved longevity compared with basic replacement parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-carbon G3000 alloy for improved wear resistance\u003c\/li\u003e\n  \u003cli\u003eGeomet coating to reduce corrosion and surface degradation\u003c\/li\u003e\n  \u003cli\u003e12-year warranty for long-term coverage\u003c\/li\u003e\n  \u003cli\u003eEngineered and balanced to minimize vibration and shudder\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who own a Toyota Corolla (2009–2018 any engine, 2019 1.8L only) seeking a direct-fit, higher-performance front brake upgrade with corrosion protection and matched pad hardware. It’s suited for daily drivers wanting improved thermal management and reduced fade, DIY installers who prefer ready-to-fit kits, and technicians replacing front brake assemblies with durable components covered by a long warranty.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit a 2019 Toyota Corolla?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—only for 2019 Corolla models with the 1.8L engine. It does not fit 2019 2.0L models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include everything needed for front brake replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes two 275mm rotors, four pads and the necessary hardware for front installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Motorevo","offers":[{"title":"Default Title","offer_id":48080736223390,"sku":"B0FRGBDBTF","price":162.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/motorevo-front-brake-kit-packaging_ef85783b-2d91-4c40-9494-fc071048f97e.jpg?v=1785784751","url":"https:\/\/northtrailauto.ca\/products\/motorevo-front-brake-kit-for-toyota-corolla-2009-2019-1-8l-fit-275mm-geomet-coated-drilled-slotted-rotors-pads","provider":"North Trail Auto","version":"1.0","type":"link"}