{"product_id":"mowok-suzuki-gsxr-swing-arm-spools-sliders-0-315in-thread-fit-anodized-aluminum","title":"MOWOK Suzuki GSXR Swing Arm Spools Sliders — 0.315in Thread Fit, Anodized Aluminum","description":"\u003cp\u003e\u003cstrong\u003eMOWOK swing arm spools are anodized aluminum sliders designed to protect the rear swingarm and simplify paddock-stand lifts for Suzuki GSXR models that use 0.315 inch threads.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you own a Suzuki GSXR (125, 150, 600, 750, 1000 or 1300) and want a durable, lightweight spool that makes paddock stand use safer while reducing swingarm scrapes during drops, these MOWOK spools are a direct, cost-effective solution. Machined from high-performance aluminum alloy and finished with an anodized surface, the spools come with fasteners and black gasket washers to spread load and protect the bike’s finish. Note: these spools fit bikes that accept a 0.315 inch thread only — measure the bolt hole before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these spools protect my Suzuki during a tip-over?\u003c\/h3\u003e\n\n\u003cp\u003eThe spools create a sacrificial contact point at the swingarm, keeping the swingarm and subframe from directly contacting the ground if the bike is laid down. They absorb abrasion and concentrate impact on replaceable hardware instead of valuable components. Installation positions the spool outside the swingarm where it will engage first during a slide or low-speed tip.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMade from anodized aluminum alloy for abrasion resistance and corrosion protection.\u003c\/li\u003e\n  \u003cli\u003eBlack gasket washer increases contact area to minimize body damage.\u003c\/li\u003e\n  \u003cli\u003eReplaceable fasteners mean only the spool hardware needs switching after damage.\u003c\/li\u003e\n  \u003cli\u003eDesigned to sit proud of the swingarm to take initial contact during a tip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these spools work with my paddock stand and how easy is installation?\u003c\/h3\u003e\n\n\u003cp\u003eMOWOK spools are intended to accept most rear paddock stands that engage through swingarm spools — offering a secure lift point for maintenance or storage. Installation is straightforward and requires matching the spool bolts to the motorcycle’s 0.315 inch threaded holes. Each kit includes washers and hardware; add extra washers if the spool does not sit flush in your bracket.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits Suzuki GSXR models using 0.315 inch thread only — confirm bolt hole size first.\u003c\/li\u003e\n  \u003cli\u003eIncludes four washers to adjust fit and improve load distribution.\u003c\/li\u003e\n  \u003cli\u003eSimple bolt-on installation with basic hand tools; torque to manufacturer recommendations.\u003c\/li\u003e\n  \u003cli\u003eCompatible with most street, sport and off-road paddock stands designed for spool use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build features increase durability and safety?\u003c\/h3\u003e\n\n\u003cp\u003eThe spools are CNC-machined from aluminum high-performance alloy and anodized to resist corrosion and wear. MOWOK supplies specially designed fasteners matched to the spool thread size to ensure a secure connection. The included black gasket washer increases the stress distribution area to reduce damage risk to the swingarm or spool bracket during impacts.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCNC-machined aluminum alloy for a precise, consistent fit and strength-to-weight ratio.\u003c\/li\u003e\n  \u003cli\u003eAnodized finish for wear resistance and longer visual life.\u003c\/li\u003e\n  \u003cli\u003eBlack gasket spreader reduces point loading on the swingarm or bracket.\u003c\/li\u003e\n  \u003cli\u003eQuality fasteners tailored to the 0.315 inch thread ensure reliable retention.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does MOWOK support buyers after purchase?\u003c\/h3\u003e\n\n\u003cp\u003eMOWOK offers lifetime technical support and a six-month damage replacement policy to assist with product issues or fitment questions. If you encounter fitment challenges — such as a spool not seating flush — the included washers can help, and the support team will guide additional steps. Reach out to MOWOK first for troubleshooting and replacement options before seeking third-party fixes.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLifetime technical support for fitment and installation questions.\u003c\/li\u003e\n  \u003cli\u003eSix months damage replacement service for qualifying issues.\u003c\/li\u003e\n  \u003cli\u003eGuidance on adding washers or correct torque to achieve secure fitment.\u003c\/li\u003e\n  \u003cli\u003eCustomer-first approach to resolving compatibility concerns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These MOWOK swing arm spools are aimed at Suzuki GSXR owners (125–1300 variants) who need reliable lift points for paddock-stand work and want to add sacrificial protection to the rear swingarm. Choose these spools if your bike accepts 0.315 inch threaded spool bolts and you value a lightweight, anodized aluminum part with included washers and manufacturer support. Measure your bolt hole size before purchasing to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these spools fit my GSXR?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit Suzuki GSXR models that use 0.315 inch threaded spool bolts. Measure your bolt hole before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes two anodized aluminum spools, fasteners and four black gasket washers for proper fit and load distribution.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MOWOK","offers":[{"title":"Default Title","offer_id":48085541814430,"sku":"B093D8SLYF","price":34.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/mowok-front-packaging-gsxr-spool.jpg?v=1785872256","url":"https:\/\/northtrailauto.ca\/products\/mowok-suzuki-gsxr-swing-arm-spools-sliders-0-315in-thread-fit-anodized-aluminum","provider":"North Trail Auto","version":"1.0","type":"link"}