{"product_id":"mzs-3-5-front-leveling-kit-for-silverado-sierra-tahoe-yukon-2007-2026-3-5in-lift-cnc-billet-aluminum-spacers","title":"MZS 3.5\" Front Leveling Kit for Silverado Sierra Tahoe Yukon 2007-2026 — 3.5in lift, CNC billet aluminum spacers","description":"\u003cp\u003e\u003cstrong\u003eThe MZS 3.5-inch Front Leveling Kit is a bolt-on aluminum spacer system designed to lift and level the front of compatible Silverado, Sierra, Tahoe and Yukon trucks by a true 3.5 inches while preserving factory ride quality.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis leveling kit combines a 2\" upper spacer with a 1.5\" lower spacer to correct nose-sag, improve ground clearance and achieve a balanced stance between front and rear. Precision CNC-machined from billet aluminum and finished to resist corrosion, the kit installs with basic hand tools in roughly 1.5–2 hours per side. It’s engineered to fit a wide range of 2007–2026 GM full-size trucks and SUVs when not equipped with excluded factory options.\u003c\/p\u003e\n\n\u003ch3\u003eWhich trucks and trims is this leveling kit compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe MZS kit fits many 2007 and newer Chevrolet and GMC full-size trucks and SUVs, including Silverado, Sierra, Tahoe, Yukon, Avalanche and Suburban in both 2WD and 4WD configurations. It is not compatible with TrailBoss, AT4, MagneRide suspension vehicles, 2007 Classics, or certain 2014–2018 Denali models—verify your vehicle before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: 2007–2026 Silverado, Sierra, Tahoe, Yukon, Avalanche, Suburban (2WD \u0026amp; 4WD).\u003c\/li\u003e\n  \u003cli\u003eNot compatible: TrailBoss, AT4, MagneRide, 2007 Classic, some 2014–2018 Denali models.\u003c\/li\u003e\n  \u003cli\u003eConfirm original equipment and model year before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much lift will I actually get and why spacers differ in thickness?\u003c\/h3\u003e\n\u003cp\u003eThe kit provides a total, true lift of 3.5\" at the front by combining a 2\" upper spacer with a 1.5\" lower spacer. Spacer physical thickness doesn’t always equal the net lift because suspension geometry and component mounting points affect ride height. Expect a measured 3.5\" front rise when installed as designed, not a one-to-one correspondence with raw spacer thickness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCombined lift: 3.5\" front height increase.\u003c\/li\u003e\n  \u003cli\u003eSpacer set: 2\" upper + 1.5\" lower for correct alignment of strut and hub geometry.\u003c\/li\u003e\n  \u003cli\u003eNote: lift amount results from assembly, not simply spacer thickness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the kit change ride quality or require additional modifications?\u003c\/h3\u003e\n\u003cp\u003eMZS engineered this leveling kit to maintain factory ride characteristics while improving clearance and stance. Because it is a strut-spacer design, most drivers notice no harshness or significant handling change. A front-end alignment is recommended after installation to restore steering geometry to factory specifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaintains factory ride feel when properly installed.\u003c\/li\u003e\n  \u003cli\u003eNo major suspension part replacements required for fitment.\u003c\/li\u003e\n  \u003cli\u003eProfessional or DIY alignment recommended post-install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the MZS kit and how hard is installation?\u003c\/h3\u003e\n\u003cp\u003eEach spacer is CNC machined from billet aluminum for high strength, corrosion resistance and consistent fitment. The anti-rust finish and precision manufacturing help ensure long life under road conditions. Installation is a straightforward bolt-on job that can typically be completed in 1.5–2 hours using common tools; no specialized equipment is necessary.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: billet aluminum, CNC-machined for precise tolerances.\u003c\/li\u003e\n  \u003cli\u003eFinish: corrosion-resistant to protect against weather and road salts.\u003c\/li\u003e\n  \u003cli\u003eInstallation time: approximately 1.5–2 hours; basic hand tools required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The MZS 3.5\" Front Leveling Kit is aimed at truck and SUV owners who want a simple, durable bolt-on solution to correct front-end sag, add moderate ground clearance, and improve vehicle stance without replacing factory struts. It’s ideal for daily drivers and enthusiasts running stock or slightly larger tires who need compatibility with many 2007–2026 GM models—provided their vehicle is not one of the excluded trims. Always check fitment notes and consider a professional alignment after installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2016 Denali?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Some 2014–2018 Denali models are not compatible. Verify your Denali’s suspension type—if it has MagneRide or specific Denali geometry, this kit may not fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need new shocks or struts after installing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No new shocks are usually required; this is a spacer design. A front-end alignment is recommended after installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MZS","offers":[{"title":"Default Title","offer_id":48082813976734,"sku":"B08JC8KYVY","price":139.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/mzs-front-leveling-kit-packaging-front.jpg?v=1785815207","url":"https:\/\/northtrailauto.ca\/products\/mzs-3-5-front-leveling-kit-for-silverado-sierra-tahoe-yukon-2007-2026-3-5in-lift-cnc-billet-aluminum-spacers","provider":"North Trail Auto","version":"1.0","type":"link"}