{"product_id":"nicecnc-kickstand-lift-block-for-harley-road-king-street-glide-black-1-stackable-precision-machined-stability","title":"NICECNC Kickstand Lift Block for Harley Road King \u0026 Street Glide — Black 1\" Stackable, Precision-Machined Stability","description":"\u003cb\u003eNICECNC Black Bracket Lifting Block raises your motorcycle kickstand by 1\" per block (stackable to 2\") to reduce excessive lean and improve parking stability on compatible Harley-Davidson Road King and Street Glide models.\u003c\/b\u003e\n\n\u003cp\u003eIf your Harley sits too upright or leans sharply because of taller shocks, larger front wheels, or fork changes, a simple lift under the kickstand can make a big difference. The NICECNC Kickstand Lift Block is a precision-machined bracket that bolts to the existing kickstand foot to increase ground clearance and change the bike's resting angle without permanent frame modifications. It's designed to be user-installed and reversible, offering a practical way to stabilize your bike when parked.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the lift block change my bike's parking angle?\u003c\/h3\u003e\n\u003cp\u003eThe block adds measured height at the kickstand foot so the motorcycle rests at a slightly different tilt. Each block adds approximately 1 inch of effective kickstand height; stacking two blocks provides about 2 inches of lift. By increasing the stand height you reduce excessive leaning, which makes mounting and dismounting safer and helps prevent tip-over on softer surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne block = ~1\" increase in kickstand height.\u003c\/li\u003e\n  \u003cli\u003eStack two blocks to achieve ~2\" total lift.\u003c\/li\u003e\n  \u003cli\u003eAlters resting angle to reduce lean and improve balance.\u003c\/li\u003e\n  \u003cli\u003eWorks on firm, level surfaces and improves stability on pavement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my Harley Road King or Street Glide model?\u003c\/h3\u003e\n\u003cp\u003eThe NICECNC block is built to fit a broad range of Harley-Davidson Road King and Street Glide variants from the model years listed. Confirm fitment by checking the product listing for your exact year and model—Road King FLHR (1994–2024), Road King Special FLHRXS (2017–2024), and Street Glide FLHX (2006–2024) are covered. If your bike has non-stock kickstand geometry, compare dimensions before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with FLHR, FLHRXS, FLHX model ranges shown.\u003c\/li\u003e\n  \u003cli\u003eVerify your model year against the fitment list prior to purchase.\u003c\/li\u003e\n  \u003cli\u003eWorks with many common aftermarket suspension and wheel setups.\u003c\/li\u003e\n  \u003cli\u003eNot intended to permanently modify factory kickstand structure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the NICECNC kickstand lift block?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: position the bracket on the kickstand foot, mark hole locations, drill two mounting holes, then fasten using the supplied hardware. The block ships with the necessary bolts so you can complete the job at home with basic tools. Because it mounts externally, removal or reconfiguration (single or stacked) is quick and reversible.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMark kickstand, drill two holes for mounting.\u003c\/li\u003e\n  \u003cli\u003eSecure bracket using the included hardware for a snug fit.\u003c\/li\u003e\n  \u003cli\u003eStack a second bracket and repeat mounting for additional lift.\u003c\/li\u003e\n  \u003cli\u003eNo welding or permanent frame changes required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finishes are used, and will it withstand road use?\u003c\/h3\u003e\n\u003cp\u003eThe bracket is precision-made and finished in black to blend with factory components and resist corrosion. It’s designed for the stresses of normal parking loads and daily riding conditions when properly installed. Routine inspection of fasteners and bracket condition after installation is recommended, as with any aftermarket part.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable black finish for corrosion resistance and visual match.\u003c\/li\u003e\n  \u003cli\u003eMachined to fit securely to kickstand foot when mounted correctly.\u003c\/li\u003e\n  \u003cli\u003eHandles standard parking loads; inspect periodically.\u003c\/li\u003e\n  \u003cli\u003eStackable design keeps installation clean and reversible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: riders of Harley Road King and Street Glide models who have raised suspensions, larger front wheels, or aftermarket forks and need a simple, reversible solution to excessive lean when parked. It's ideal for owners who want an easy DIY upgrade to improve parking stability without permanent modifications, and for riders who frequently park on pavement or hard-packed surfaces where a small change in kickstand height makes a real difference.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I stack two NICECNC blocks for additional lift?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, two blocks can be stacked to achieve approximately 2 inches of total kickstand lift.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does installation require welding or special tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No welding is needed; installation uses two drilled holes and the supplied hardware with basic tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"NICECNC","offers":[{"title":"Default Title","offer_id":48085310210206,"sku":"B0D8KM374B","price":40.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/nicecnc-front-view-kickstand-lift-block.jpg?v=1785868931","url":"https:\/\/northtrailauto.ca\/products\/nicecnc-kickstand-lift-block-for-harley-road-king-street-glide-black-1-stackable-precision-machined-stability","provider":"North Trail Auto","version":"1.0","type":"link"}