{"product_id":"nilight-ev-adapter-cord-nema-14-30p-to-14-50r-12in-10-awg-30a-level-2-j1772-charging-adapter","title":"Nilight EV Adapter Cord NEMA 14-30P to 14-50R 12in — 10 AWG 30A Level 2 J1772 Charging Adapter","description":"\u003cp\u003e\u003cstrong\u003eA compact Nilight adapter cord that converts a NEMA 14-30 30-amp dryer outlet into a NEMA 14-50 50-amp EV charging inlet for Level 2 J1772 chargers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty 12-inch Nilight EV adapter lets owners use common 4-prong dryer-style receptacles to connect Level 2 J1772 charging equipment that expects a 14-50R inlet. Built with full 10 AWG stranded copper conductors and a flame-retardant STW PVC jacket, the cord balances flexibility and durability for home garage or covered outdoor use. It’s designed for charging at up to 30 amps from a 14-30R receptacle; verify your outlet type and charging equipment compatibility before use.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this adapter fit my home charging setup?\u003c\/h3\u003e\n\u003cp\u003eThe Nilight adapter has a NEMA 14-30P male plug (30A) that connects to typical 4-prong dryer outlets and a NEMA 14-50R female inlet (50A) for your EV charger. It does not alter the outlet’s circuit rating — your actual charging current should be set to match the 30-amp source to avoid tripping breakers or overheating.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlugs: NEMA 14-30P (male) to NEMA 14-50R (female)\u003c\/li\u003e\n  \u003cli\u003eLength: 12 inches — short, direct connection for garage use\u003c\/li\u003e\n  \u003cli\u003eElectrical rating: rated for 125\/250V, 3750W, typical use at 30A\u003c\/li\u003e\n  \u003cli\u003eIntended for Level 2 J1772 EV chargers; not a dryer or RV adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this cord safe and built to last in household conditions?\u003c\/h3\u003e\n\u003cp\u003eYes — Nilight uses 100% pure stranded copper 10 AWG conductors for reliable conductivity and an STW-rated, flame-retardant PVC jacket for abrasion and weather protection. The construction promotes flexibility while protecting the wires from everyday garage hazards and moderate outdoor exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull 10 AWG stranded copper for higher conductivity and flexibility\u003c\/li\u003e\n  \u003cli\u003eSTW jacket with flame-retardant PVC for heat and abrasion resistance\u003c\/li\u003e\n  \u003cli\u003eWeather-resistant outer sheath suitable for rain, wind, and mild snow\u003c\/li\u003e\n  \u003cli\u003eShort run reduces voltage drop compared with long extension alternatives\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat charging performance should I expect when using this adapter?\u003c\/h3\u003e\n\u003cp\u003eThe adapter itself is rated for higher current, but when plugged into a 14-30 outlet you should limit charging to the outlet’s circuit capacity — typically 30 amps. Set your EV or EVSE to the appropriate current to avoid prolonged heat buildup in the plug or nuisance tripping of the home circuit breaker.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSet charge rate to 30A or lower when using a 14-30R receptacle\u003c\/li\u003e\n  \u003cli\u003eRated power up to 3750W based on 125\/250V specification\u003c\/li\u003e\n  \u003cli\u003eShort cord length minimizes temperature rise from long runs\u003c\/li\u003e\n  \u003cli\u003eCheck vehicle\/charger settings to match source capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this adapter work with my existing EV charger and outlet?\u003c\/h3\u003e\n\u003cp\u003eIt’s compatible with Level 2 J1772 chargers that plug into a 14-50 inlet, allowing those chargers to connect to a 14-30 household outlet instead. Confirm that your home receptacle is a NEMA 14-30R and that you adjust the EVSE or vehicle charging current appropriately to the circuit’s rating.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with J1772 Level 2 charging equipment expecting 14-50R\u003c\/li\u003e\n  \u003cli\u003eNot suitable as a direct replacement for dedicated dryer or RV wiring\u003c\/li\u003e\n  \u003cli\u003eAlways inspect outlet and adapter for damage before use\u003c\/li\u003e\n  \u003cli\u003eConsult a licensed electrician for any outlet or circuit concerns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Nilight 30A-to-50A adapter is ideal for EV owners who already have a 4-prong NEMA 14-30 dryer-style outlet in a garage or covered parking area and want a short, robust adapter to use an existing Level 2 J1772 charging unit without rewiring. It’s also useful for DIYers or homeowners who prefer a compact, heavy-gauge cord for temporary or occasional charging where a permanent 14-50 installation isn’t available. Do not use this as a permanent substitute for proper circuit upgrades — consult an electrician when in doubt.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this adapter to plug my EV charger into a dryer outlet?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — if your dryer outlet is a NEMA 14-30R. Set charging current to 30A or less to match the circuit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this adapter suitable for RV or direct dryer use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — it’s designed for EV Level 2 J1772 chargers only, not for powering dryers or RVs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Nilight","offers":[{"title":"Default Title","offer_id":48086401384606,"sku":"B0CNK5B87D","price":42.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/nilight-front-plug_0b9fb516-8754-4fc0-8167-b9b961bd2699.jpg?v=1785897587","url":"https:\/\/northtrailauto.ca\/products\/nilight-ev-adapter-cord-nema-14-30p-to-14-50r-12in-10-awg-30a-level-2-j1772-charging-adapter","provider":"North Trail Auto","version":"1.0","type":"link"}