{"product_id":"niujkun-3-00-12-80-100-12-dirt-bike-tire-tube-set-12-inch-rim-heavy-duty-2mm-butyl-tube-aggressive-all-terrain-tread","title":"NiuJKun 3.00-12 (80\/100-12) dirt bike tire \u0026 tube set — 12-inch rim, heavy-duty 2mm butyl tube, aggressive all-terrain tread","description":"\u003cp\u003e\u003cstrong\u003eNiuJKun's 3.00-12 (80\/100-12) dirt bike tire and heavy-duty butyl tube set is a rugged, all-terrain replacement designed for 12\" rims, suitable as either a front or rear wheel option.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a dependable 12-inch tire and tube combo for mini dirt bikes, pit bikes, or small motocross machines, this NiuJKun set offers a heavy-duty construction, a pronounced tread for grip on varied surfaces, and a reinforced 2 mm butyl inner tube to resist punctures. The package pairs a 3.00-12 (80\/100-12) tire with a compatible 3.00\/3.50-12 straight valve tube and fits most 12\" rims that specify the 3.00-12 size. Built with thicker rubber and an aggressive tread block pattern, the set is made to handle gravel, mud, sand, and trail conditions while carrying moderate loads.\u003c\/p\u003e\n\n\u003ch3\u003eWill this tire fit my bike's rim and wheel position?\u003c\/h3\u003e\n\n\u003cp\u003eThe NiuJKun 3.00-12 tire is intended for 12\" rims and matches measurements listed as 3.00-12 or 80\/100-12. It can be used as either a front or rear tire on compatible machines, but always verify rim width and clearance before mounting. Check load index and recommended pressure to confirm suitability for your bike and riding style.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSize compatibility: 3.00-12 and 80\/100-12 are equivalent\u003c\/li\u003e\n  \u003cli\u003eRim diameter: 12 inches standard\u003c\/li\u003e\n  \u003cli\u003eMax load: 480 lbs (per tire rating)\u003c\/li\u003e\n  \u003cli\u003eRecommended pressure: up to 300 kPa (check bike manual)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the tread and construction perform off-road?\u003c\/h3\u003e\n\n\u003cp\u003eThe tire features a large, open-block tread design to increase traction and self-cleaning ability on loose surfaces. Its compound and tread depth help absorb impacts and improve directional control across mixed terrain, without compromising predictable handling in tighter turns.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAggressive block pattern for mud, gravel, sand, and trail grip\u003c\/li\u003e\n  \u003cli\u003eShock-absorbing rubber to smooth small impacts and ruts\u003c\/li\u003e\n  \u003cli\u003eImproved lateral stability for cornering and uneven ground\u003c\/li\u003e\n  \u003cli\u003eSelf-cleaning spacing to shed mud and debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the inner tube offer compared to thin stock tubes?\u003c\/h3\u003e\n\n\u003cp\u003eThe included heavy-duty butyl inner tube is 2 mm thick to resist punctures, pinch flats, and rapid air loss that can occur with thinner tubes. It uses a straight valve stem sized for 12\" rims and is optimized to pair with the 3.00-12 tire for reliable mounting and pressure retention during off-road riding.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e2 mm butyl rubber resists punctures and pinch flats\u003c\/li\u003e\n  \u003cli\u003eStraight valve stem compatible with 12\" rims\u003c\/li\u003e\n  \u003cli\u003eDesigned for motocross and off-road durability\u003c\/li\u003e\n  \u003cli\u003eEasier repair and longer life than economy tubes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I mount and care for this tire and tube set?\u003c\/h3\u003e\n\n\u003cp\u003eMounting should follow standard tire and tube procedures: inspect rim for sharp edges, slightly inflate the tube to avoid pinching, seat the bead evenly, and balance if needed. Maintain recommended pressure for your load and terrain, check for damage after heavy rides, and replace if cuts or excessive wear appear.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePre-check rim and clean bead area before installation\u003c\/li\u003e\n  \u003cli\u003ePartially inflate tube to prevent pinching while seating\u003c\/li\u003e\n  \u003cli\u003eAdhere to pressure limits (up to 300 kPa), adjust by terrain\u003c\/li\u003e\n  \u003cli\u003eInspect regularly for cuts, bulges, or tread wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders of mini dirt bikes, pit bikes, and small motocross machines seeking a cost-effective, durable 12\" tire and tube replacement that balances off-road traction with puncture resistance. Choose this NiuJKun kit if you need a robust spare or direct replacement for 3.00-12 (80\/100-12) wheels and want a heavy-duty inner tube to reduce downtime on trails and tracks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is 3.00-12 the same as 80\/100-12?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. 3.00-12 and 80\/100-12 are equivalent sizes and interchangeable for 12\" rims.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this tire be used as both front and rear?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The design suits either front or rear mounting on compatible mini dirt bikes and pit bikes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"NiuJKun","offers":[{"title":"Default Title","offer_id":48080477847710,"sku":"B0DYNTN68L","price":133.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/niujkun-tire-front-view.jpg?v=1785781796","url":"https:\/\/northtrailauto.ca\/products\/niujkun-3-00-12-80-100-12-dirt-bike-tire-tube-set-12-inch-rim-heavy-duty-2mm-butyl-tube-aggressive-all-terrain-tread","provider":"North Trail Auto","version":"1.0","type":"link"}