{"product_id":"oemtools-manual-fluid-extractor-pump-8l-2-gal-with-41-dipstick-hose-hand-pump-overflow-shutoff","title":"OEMTOOLS Manual Fluid Extractor Pump 8L (2 gal) with 41\" Dipstick Hose — Hand Pump, Overflow Shutoff","description":"\u003cp\u003e\u003cstrong\u003eThe OEMTOOLS Manual Fluid Extractor Pump is an 8L (2-gallon) hand-operated oil and fluid extractor with a 41\" dipstick hose and overflow shutoff for clean, no-power fluid removal.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, manually powered extractor is designed to remove engine oil, coolant, transmission fluid, gear oil and water from cars, motorcycles, marine engines and industrial equipment without lifting the vehicle or removing drain plugs. Its single-piece reservoir reduces leaks and cleanup, while the included 41\" dipstick hose adapter reaches deep or awkward fill points. Because it operates by hand, the unit is portable and reliable for roadside, dockside or workshop use where power or compressed air may not be available.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this pump simplify oil and fluid changes?\u003c\/h3\u003e\n\u003cp\u003eThe OEMTOOLS extractor draws fluids through dipstick tubes and other openings so you can avoid crawling under a vehicle or dealing with messy drain plugs. The hand pump design gives you precise control over flow speed and when the transfer stops. Its leak-resistant reservoir and built-in overflow shutoff minimize spills for a cleaner jobsite.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-operated pump—no electricity or compressed air required\u003c\/li\u003e\n  \u003cli\u003e41\" dipstick hose adapter for hard-to-reach reservoirs\u003c\/li\u003e\n  \u003cli\u003eSingle-piece, leak-resistant tank for easier cleanup\u003c\/li\u003e\n  \u003cli\u003eOverflow shutoff valve prevents overfilling and spills\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat types of vehicles and fluids will it handle?\u003c\/h3\u003e\n\u003cp\u003eThis extractor works well with a range of small- to medium-sized engines and systems including cars, trucks, motorcycles, boats and light industrial equipment. It is optimized for low- to medium-viscosity liquids such as engine oil, coolant, transmission fluid, power steering fluid, gear oil and plain water. Avoid using it with highly viscous or abrasive fluids that may damage seals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with engine oil, coolant, transmission and gear fluids\u003c\/li\u003e\n  \u003cli\u003eSuitable for automobiles, motorcycles, marine engines and light equipment\u003c\/li\u003e\n  \u003cli\u003eIdeal for dipstick and fill-tube extraction—no lift required\u003c\/li\u003e\n  \u003cli\u003eNot recommended for extremely thick or slurry‑like fluids\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to use and maintain in a busy garage?\u003c\/h3\u003e\n\u003cp\u003eThe reservoir and pump are serviceable and straightforward to operate: insert the hose, hand-pump until fluid transfers, and rely on the automatic shutoff when capacity is reached. The durable, single-piece tank reduces points for leaks and simplifies rinsing between uses. For regular shop use, keep the hose and seals clean and inspect the shutoff valve for reliable performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick setup—insert adapter, position hose, and hand-pump\u003c\/li\u003e\n  \u003cli\u003eAutomatic shutoff reduces monitoring during extraction\u003c\/li\u003e\n  \u003cli\u003eSingle-piece tank is easier to rinse and less prone to leaks\u003c\/li\u003e\n  \u003cli\u003eRoutine hose and seal checks extend service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and disposal steps should I follow?\u003c\/h3\u003e\n\u003cp\u003eUse appropriate PPE, work in a well-ventilated area, and secure the vehicle or vessel before extracting fluids. The extractor stops suction when full to limit spills, but always transport and dispose of recovered fluids per local, state and federal regulations to protect people and the environment. Clean the tool promptly after each use to prevent cross-contamination between fluid types.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWear gloves and eye protection when handling used fluids\u003c\/li\u003e\n  \u003cli\u003eDo not exceed the 8L (2-gallon) capacity to avoid overflow\u003c\/li\u003e\n  \u003cli\u003eFollow local disposal rules for used oil and coolant\u003c\/li\u003e\n  \u003cli\u003eRinse tank and hose to prevent mixing different fluids\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The OEMTOOLS 8L Manual Fluid Extractor Pump is built for DIY mechanics, mobile technicians, boat owners and small shops that need a portable, power-free solution for routine fluid changes and system flushes. It’s particularly useful when vehicle clearance is limited or when mobility and spill control matter most.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this extractor remove oil through a dipstick tube?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes a 41\" dipstick hose adapter to draw fluids through dipstick tubes without removing drain plugs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the pump require electricity or air?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The unit uses a manual hand pump so it works anywhere without electrical power or compressed air.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OEMTOOLS","offers":[{"title":"Default Title","offer_id":48082596364446,"sku":"B07N7XC7DM","price":170.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/oemtools-front-view-reservoir.jpg?v=1785811611","url":"https:\/\/northtrailauto.ca\/products\/oemtools-manual-fluid-extractor-pump-8l-2-gal-with-41-dipstick-hose-hand-pump-overflow-shutoff","provider":"North Trail Auto","version":"1.0","type":"link"}