{"product_id":"onyuoku-front-lower-a-arm-bushing-shaft-kit-for-polaris-7501093-zinc-plated-shafts-complete-rebuild-set","title":"ONYUOKU Front Lower A-Arm Bushing Shaft Kit for Polaris (7501093) — Zinc-Plated Shafts \u0026 Complete Rebuild Set","description":"\u003cp\u003e\u003cstrong\u003eONYUOKU Front Lower A-ARM Bushing Shaft Kit 7501093 is a complete replacement set that rebuilds both front lower A-arms on many Polaris ATVs with OEM-fit shafts, bushings, spacers, washers and fasteners.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit gives you everything needed to restore front lower A-arm alignment and eliminate play caused by worn bushings and shafts. Designed as a direct replacement for Polaris part numbers 7501093 and 5020681, the set includes two steel shafts, four plastic bushings, four spacers, four washers, four split spring washers and four screws. Components are zinc-plated or molded in durable plastic to resist corrosion and wear under normal off-road use.\u003c\/p\u003e\n\n\u003ch3\u003eWill this kit fit my Polaris model?\u003c\/h3\u003e\n\u003cp\u003eThe ONYUOKU kit is engineered to match the factory specifications for a wide range of Polaris ATVs, including Sportsman, Scrambler, Magnum, Trail Blazer, Trail Boss, Xplorer, Xpedition, Xpress and Worker models from the mid-1990s through 2015. Always verify the OEM part number (7501093 \/ 5020681) and compare with your vehicle’s service manual before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible families: Sportsman, Scrambler, Magnum, Trail Blazer, Trail Boss, Xplorer, Xpedition, Xpress, Worker.\u003c\/li\u003e\n  \u003cli\u003eModel years covered: 1993–2015 across various engine sizes (250–800cc depending on model).\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for OEM numbers: 7501093 and 5020681.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and are they OEM quality?\u003c\/h3\u003e\n\u003cp\u003eThe kit supplies every part needed to rebuild both front lower A-arms so you won’t be missing small washers or spacers during the job. Components are manufactured to fit OEM dimensions: steel shafts with zinc plating for corrosion resistance, and molded plastic bushings sized to match original tolerances.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 2 steel A-arm shafts, 4 plastic bushings, 4 spacers, 4 washers, 4 split spring washers, 4 screws.\u003c\/li\u003e\n  \u003cli\u003eMaterial highlights: zinc-plated high-strength steel shafts and wear-resistant plastic bushings.\u003c\/li\u003e\n  \u003cli\u003eDesigned to replicate OEM fit for straightforward installation and reliable alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eInstalling the kit is a moderate DIY task for mechanically inclined owners and a quick job for professional technicians. You’ll need basic hand tools and a safe way to support the ATV while you remove and reinstall the A-arm hardware; the kit is supplied to replace both sides in one service session.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon tools: socket set, torque wrench, breaker bar, penetrating oil, and a bench or shop press if bushings are tight.\u003c\/li\u003e\n  \u003cli\u003eService tip: inspect A-arm bearings and ball joints while bushings are out, and replace any worn components for best results.\u003c\/li\u003e\n  \u003cli\u003eEstimated time: 1–3 hours depending on experience and rust\/penetration of existing hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and longevity improvements should I expect?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn bushings and shafts reduces play in the front suspension, improving steering response and helping maintain consistent tire wear. The zinc-plated shafts and molded plastic bushings provide improved corrosion resistance and a smoother pivot surface compared with heavily worn factory parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBenefits: tighter steering feel, reduced clunking, and restored proper alignment.\u003c\/li\u003e\n  \u003cli\u003eDurability: corrosion-resistant steel and wear-grade plastic for extended service life.\u003c\/li\u003e\n  \u003cli\u003eMaintenance: periodic inspection and lubrication (if applicable) will maximize longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ONYUOKU 7501093 Front Lower A-ARM Bushing Shaft Kit is made for Polaris ATV owners and mechanics wanting a full, OEM-dimension replacement to rebuild both front lower A-arms. It’s ideal if you notice excessive front-end play, steering slop, or clunking, or if you’re performing routine suspension service on compatible Sportman, Scrambler, Magnum, Trail Blazer, Trail Boss, Xplorer, Xpedition, Xpress, or Worker models. Confirm compatibility with your model year and OEM part number before purchase to ensure a proper fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit replace OEM part 7501093?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the ONYUOKU kit is a direct replacement for OEM part numbers 7501093 and 5020681.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I rebuild both front lower A-arms with this kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes shafts, bushings, spacers and fasteners needed to rebuild both lower A-arms.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ONYUOKU","offers":[{"title":"Default Title","offer_id":48086457680030,"sku":"B0D87LD3KX","price":45.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/onyuoku-front-a-arm-kit-packaging.jpg?v=1785898481","url":"https:\/\/northtrailauto.ca\/products\/onyuoku-front-lower-a-arm-bushing-shaft-kit-for-polaris-7501093-zinc-plated-shafts-complete-rebuild-set","provider":"North Trail Auto","version":"1.0","type":"link"}