{"product_id":"phoenix-systems-brake-fluid-test-strips-100-per-tube-copper-white-indicator-60-sec-color-change","title":"Phoenix Systems Brake Fluid Test Strips — 100 per Tube, Copper\/White Indicator, 60-sec Color Change","description":"\u003cp\u003e\u003cstrong\u003ePhoenix Systems BrakeStrip (3001-B) are single-use test strips that quickly reveal brake fluid condition so you can decide when a fluid exchange is needed.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBrake fluid degrades over time and can allow corrosion and contamination to build inside a vehicle’s braking system. The Phoenix Systems BrakeStrip offers a fast, scientific way to check fluid quality on-site: remove a strip, dip it into the brake fluid, wait 60 seconds, and compare the color change to the indicator scale. That quick measurement helps technicians and service advisors recommend fluid service with confidence instead of guessing.\u003c\/p\u003e\n\n\u003ch3\u003eHow accurate is a BrakeStrip reading for determining brake fluid health?\u003c\/h3\u003e\n\u003cp\u003eThe strip uses a color-change reagent that reacts to contaminants and corrosive byproducts in the fluid, producing an easy-to-read result in about one minute. It’s designed to follow common industry test approaches and is compatible with DOT 3, DOT 4 and DOT 5.1 fluids—covering most passenger and light-duty vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast 60-second color reaction for immediate results\u003c\/li\u003e\n  \u003cli\u003eWorks with DOT 3, 4 and 5.1 brake fluids\u003c\/li\u003e\n  \u003cli\u003eColorimetric output simplifies technician decisions\u003c\/li\u003e\n  \u003cli\u003eReduces reliance on subjective judgement during inspections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does BrakeStrip help a shop increase brake service revenue?\u003c\/h3\u003e\n\u003cp\u003eProviding a visible, science-backed test result makes it easier to justify and sell a necessary brake-fluid exchange to customers. Instead of recommending a service based on age or mileage alone, technicians can show the test strip as proof, improving conversion and trust.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGives customers tangible evidence for service recommendations\u003c\/li\u003e\n  \u003cli\u003eSupports service advisors with objective test data\u003c\/li\u003e\n  \u003cli\u003eEncourages preventative maintenance to avoid expensive repairs\u003c\/li\u003e\n  \u003cli\u003eSupplies 100 strips per tube for multiple inspections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the proper way to use a BrakeStrip in a workshop?\u003c\/h3\u003e\n\u003cp\u003eUsing the strip is straightforward and requires minimal training. Remove a single strip from the sealed tube, dip it into a brake fluid sample for the time indicated, wait 60 seconds, then compare the color to the included reference chart to determine fluid condition.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePull one strip from the tube; do not touch the reagent pad\u003c\/li\u003e\n  \u003cli\u003eDip the pad briefly into brake fluid and remove immediately\u003c\/li\u003e\n  \u003cli\u003eWait one minute for the color to develop, then read against the chart\u003c\/li\u003e\n  \u003cli\u003eDispose of used strip; maintain tube seal to preserve unused strips\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat can a BrakeStrip detect and what should I do with the result?\u003c\/h3\u003e\n\u003cp\u003eThe strip indicates contamination levels and the presence of corrosive elements that signal fluid breakdown; it does not diagnose mechanical faults but highlights when fluid replacement is advisable. Use the result to guide maintenance: schedule a brake-fluid exchange when the strip shows advanced degradation or elevated contamination.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlagged results point to accelerated fluid aging or contamination\u003c\/li\u003e\n  \u003cli\u003eEarly-stage readings suggest monitoring and planned service\u003c\/li\u003e\n  \u003cli\u003eAdvanced deterioration readings warrant immediate fluid exchange\u003c\/li\u003e\n  \u003cli\u003eHelps prevent internal corrosion and costly component repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Phoenix Systems BrakeStrip 3001-B is intended for automotive service centers, fleet maintenance teams, DOT inspectors, and DIY enthusiasts who want quick, reliable evidence of brake fluid condition. Each tube contains 100 individually usable strips, making it a practical choice for busy workshops looking to add a low-cost, high-impact diagnostic step to routine brake inspections.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these test strips compatible with DOT 3, 4 and 5.1 fluids?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. BrakeStrip 3001-B is formulated to test DOT 3, DOT 4 and DOT 5.1 brake fluids.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does it take to get a result from a BrakeStrip?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Results appear in about 60 seconds after dipping the strip into the brake fluid.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Phoenix Systems","offers":[{"title":"Default Title","offer_id":48080831152286,"sku":"B000JFJMGO","price":98.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/phoenix-systems-brakestrip-front-packaging.jpg?v=1785789422","url":"https:\/\/northtrailauto.ca\/products\/phoenix-systems-brake-fluid-test-strips-100-per-tube-copper-white-indicator-60-sec-color-change","provider":"North Trail Auto","version":"1.0","type":"link"}