{"product_id":"podavelle-3-8-billet-inline-fuel-filter-black-aluminum-30-micron-sintered-bronze-high-flow","title":"Podavelle 3\/8\" Billet Inline Fuel Filter — Black Aluminum, 30‑Micron Sintered Bronze, High Flow","description":"\u003cp\u003e\u003cstrong\u003ePodavelle's 3\/8\" billet inline fuel filter is a compact, anodized 6061-T6 aluminum filter housing that uses a removable 30-micron sintered bronze element to protect high-volume EFI and carbureted fuel systems while maintaining high flow.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact inline filter pairs a lightweight billet-aluminum body with a durable anodized finish and a reusable sintered bronze element rated at 30 microns. Engineered to pass roughly 900 liters per hour with under 1 PSI pressure drop, it’s built for systems that need reliable contaminant screening without harming fuel delivery. The 3\/8\" barb inlet and outlet are sized for common fuel hoses, and the cartridge is removable for cleaning or replacement, making it a practical choice for performance projects and routine maintenance alike.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter preserve fuel flow in high-volume EFI or carb systems?\u003c\/h3\u003e\n\u003cp\u003eThe sintered bronze element balances filtration and flow: 30-micron media removes particulates while allowing high throughput. The billet housing is shaped to minimize turbulence and pressure loss so injectors or carbs receive steady fuel supply during demanding operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlows approximately 900 liters per hour.\u003c\/li\u003e\n  \u003cli\u003ePressure drop under 1 PSI at rated flow.\u003c\/li\u003e\n  \u003cli\u003e3\/8\" barb inlet\/outlet compatible with common fuel lines.\u003c\/li\u003e\n  \u003cli\u003eOpen internal passages reduce cavitation and restriction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the construction durable and serviceable?\u003c\/h3\u003e\n\u003cp\u003eThe body is machined from 6061-T6 billet aluminum and receives an anodized black finish for corrosion resistance and scratch protection. The filter element is sintered bronze and designed to be removed, cleaned, and reused, reducing waste and long-term cost.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061-T6 billet aluminum housing for strength and light weight.\u003c\/li\u003e\n  \u003cli\u003eAnodized black surface for corrosion and wear protection.\u003c\/li\u003e\n  \u003cli\u003eRemovable sintered bronze cartridge for cleaning or replacement.\u003c\/li\u003e\n  \u003cli\u003eCompact housing length (~52.6mm excluding barbs) for tight installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this filter easy to install and maintain?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward when done by a qualified technician: the 3\/8\" barbed ends accept standard fuel hose clamps and the housing opens for element access. Regular inspection and occasional cleaning of the bronze element will keep flow high and contaminants controlled.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/8\" barbed inlet\/outlet works with standard fuel hose and clamps.\u003c\/li\u003e\n  \u003cli\u003eRemovable element simplifies periodic cleaning and inspection.\u003c\/li\u003e\n  \u003cli\u003eCompact footprint fits many engine bays and tight fuel lines.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended; no user instructions included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I choose where to place this inline filter in my fuel system?\u003c\/h3\u003e\n\u003cp\u003eLocate the filter where it’s accessible for inspection and cleaning but protected from excessive heat and vibration. Typical mounting points include near the fuel pump outlet, before the regulator, or upstream of the carburetor\/injector rail depending on system layout.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall before sensitive components like injectors or carburetors.\u003c\/li\u003e\n  \u003cli\u003eAvoid direct heat sources and high-vibration zones if possible.\u003c\/li\u003e\n  \u003cli\u003eEnsure hose clamps and routing prevent kinks or chafing.\u003c\/li\u003e\n  \u003cli\u003eLeave enough clearance to remove the housing for service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Podavelle’s 3\/8\" Billet Inline Fuel Filter is geared toward automotive enthusiasts, racers, restorers, and mechanics who run high-volume EFI or carbureted systems and need dependable particulate protection without sacrificing flow. It suits performance builds, street\/track cars, motorcycles, and any application that uses 3\/8\" fuel hose and demands a reusable, serviceable filter solution — provided installation and removal are handled by a qualified technician.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What micron rating is the Podavelle filter and can it be cleaned?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The filter element is 30 microns and is removable for cleaning or replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this filter restrict fuel flow on high-output engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—it's rated to flow about 900 L\/hr with less than 1 PSI pressure drop at rated flow.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Podavelle","offers":[{"title":"Default Title","offer_id":48087101440158,"sku":"B0D7GWXFHJ","price":34.82,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/podavelle-front-view_56b4f20a-d698-4174-a669-55865fdeee78.jpg?v=1785916497","url":"https:\/\/northtrailauto.ca\/products\/podavelle-3-8-billet-inline-fuel-filter-black-aluminum-30-micron-sintered-bronze-high-flow","provider":"North Trail Auto","version":"1.0","type":"link"}