{"product_id":"podavelle-5-16-billet-inline-fuel-filter-black-anodized-aluminum-30-micron-sintered-bronze","title":"Podavelle 5\/16\" Billet Inline Fuel Filter — Black Anodized Aluminum, 30‑Micron Sintered Bronze","description":"\u003cstrong\u003ePodavelle’s 5\/16\" billet inline fuel filter is a compact, anodized 6061-T6 aluminum filter with a removable 30‑micron sintered bronze element designed for high-flow EFI and carbureted systems.\u003c\/strong\u003e\n\n\u003cp\u003eThis inline fuel filter combines a lightweight billet aluminum body with a reusable sintered bronze element to offer corrosion resistance, easy maintenance and high flow capacity in a small package. The 5\/16\" barb fittings make it suitable for many common fuel lines, while the anodized black finish improves durability and resists wear in under-hood environments. It’s built to handle high-volume fuel delivery where low pressure drop and reliable filtration are important.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Podavelle filter maintain fuel flow without starving high-volume engines?\u003c\/h3\u003e\n\u003cp\u003eThe filter uses a sintered bronze element rated at 30 microns that balances particle capture with minimal restriction. Flow testing indicates up to 900 liters per hour with less than 1 PSI pressure drop, helping preserve fuel delivery for EFI and high-flow carb setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e30‑micron sintered bronze element for consistent filtration\u003c\/li\u003e\n  \u003cli\u003eMeasured flow: approximately 900 L\/hr under typical conditions\u003c\/li\u003e\n  \u003cli\u003ePressure drop: under 1 PSI to minimize pump load\u003c\/li\u003e\n  \u003cli\u003eRemovable element for cleaning and reuse\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and dimensions should I expect from this inline filter?\u003c\/h3\u003e\n\u003cp\u003eThe housing is machined from 6061‑T6 billet aluminum and finished with a black anodized coating to resist corrosion and surface wear. The unit is compact — roughly 52.6 mm housing length excluding barbs — and uses 5\/16\" barb inlet and outlet fittings for common fuel line sizes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHousing: 6061‑T6 billet aluminum, anodized black\u003c\/li\u003e\n  \u003cli\u003eBarb size: 5\/16\" inlet and outlet for standard fuel hoses\u003c\/li\u003e\n  \u003cli\u003eApproximate housing length: 52.6 mm (excluding barbs)\u003c\/li\u003e\n  \u003cli\u003eFilter element: removable sintered bronze, 30 micron\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I service and install the Podavelle inline fuel filter?\u003c\/h3\u003e\n\u003cp\u003eThe bronze element is designed to be pulled for cleaning or replacement, making maintenance straightforward without replacing the whole unit. Because fuel system work can involve pressurized lines and safety considerations, professional installation is recommended to ensure correct fitment, hose clamps and leak-free connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemovable element for cleaning or swap-out\u003c\/li\u003e\n  \u003cli\u003eFits standard 5\/16\" fuel hose with secure clamps\u003c\/li\u003e\n  \u003cli\u003eAnodized finish reduces risk of corrosion at fittings\u003c\/li\u003e\n  \u003cli\u003eProfessional installation advised for safety and warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter fit my EFI or carbureted application?\u003c\/h3\u003e\n\u003cp\u003eThe Podavelle 5\/16\" billet inline filter is intended for high-volume EFI and carburetor systems that accept 5\/16\" barb connections. Check your system’s hose diameter and flow requirements; this filter is optimized for setups that need high throughput with fine particle filtration at 30 microns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBest suited for fuel lines using 5\/16\" barbed fittings\u003c\/li\u003e\n  \u003cli\u003eDesigned for high-volume EFI or carb applications\u003c\/li\u003e\n  \u003cli\u003eRecommended where a low pressure drop is important\u003c\/li\u003e\n  \u003cli\u003eConfirm compatibility with fuel pump flow ratings and hose size\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Podavelle 5\/16\" billet inline fuel filter is for vehicle builders, performance enthusiasts and professional shops that require a compact, reusable filter capable of high flow with low restriction. It’s a practical choice when upgrading or maintaining EFI and carbureted fuel systems that use 5\/16\" hoses and demand durable, serviceable components. Always verify fitment and opt for professional installation to maintain safe, reliable fuel delivery.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I clean and reuse the filter element?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The sintered bronze element is removable and can be cleaned or replaced for extended use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this filter cause fuel pressure drop in my EFI system?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No significant drop expected: it flows about 900 L\/hr with under 1 PSI pressure loss in typical conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Podavelle","offers":[{"title":"Default Title","offer_id":48087103537310,"sku":"B0D7H8YJB1","price":34.82,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/podavelle-billet-filter-front-view.jpg?v=1785916524","url":"https:\/\/northtrailauto.ca\/products\/podavelle-5-16-billet-inline-fuel-filter-black-anodized-aluminum-30-micron-sintered-bronze","provider":"North Trail Auto","version":"1.0","type":"link"}