{"product_id":"podavelle-an6-male-to-5-8-18-inverted-flare-90-adapter-black-anodized-6061-t6-swivel-elbow","title":"Podavelle AN6 Male to 5\/8-18 Inverted Flare 90° Adapter — Black Anodized 6061-T6 Swivel Elbow","description":"\u003cp\u003e\u003cstrong\u003ePodavelle's AN6 male to 5\/8-18 inverted flare 90° adapter is a lightweight, anodized aluminum fitting that converts AN6 lines to 5\/8\"-18 IFM with a swivel elbow for tight routing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis adapter is machined from 6061-T6 billet aluminum and finished with black anodizing to resist corrosion while keeping weight low. It’s designed to bridge AN6 (9\/16x18 UNF) male flare connections to 5\/8\" x 18 inverted flare power steering or fluid lines at a 90-degree orientation. The 360° swivel feature gives installers freedom to orient the hose without twisting, and compatibility with gasoline and alcohol fuels makes it suitable for many automotive and motorsport plumbing tasks.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this adapter simplify tight hose routing?\u003c\/h3\u003e\n\u003cp\u003eThe 90° elbow reduces hose bending radius and clears nearby components where a straight union would snag or tangle. Its swivel nut lets you rotate the hose after threading the fitting, so you can achieve the correct angle without forcing or kinking the line. This reduces stress on hose ends and fittings for a cleaner, longer-lasting installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e90° orientation avoids sharp hose bends in compact engine bays\u003c\/li\u003e\n  \u003cli\u003e360° swivel nut enables final hose alignment after installation\u003c\/li\u003e\n  \u003cli\u003eSuitable for power steering and fluid routing where space is limited\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this hold up to fuel and steering fluids?\u003c\/h3\u003e\n\u003cp\u003eThe part is manufactured from aircraft-grade 6061-T6 aluminum and receives an anodized surface to resist corrosion and wear. Podavelle specifies compatibility with gasoline and alcohol-based fuels, and the materials are commonly used in fluid-handling fittings for automotive systems. As with any fluid connection, use proper sealing practices and follow torque recommendations for reliable, leak-free service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061-T6 billet aluminum resists deformation under clamping\u003c\/li\u003e\n  \u003cli\u003eAnodized finish provides corrosion resistance in harsh environments\u003c\/li\u003e\n  \u003cli\u003eCompatible with gasoline and alcohol-based fuels per manufacturer guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact thread and sizing details?\u003c\/h3\u003e\n\u003cp\u003eThe adapter converts AN6 male flare (9\/16\"-18 UNF) to a 5\/8\" x 18 inverted flare male (IFM), making it suitable where SAE-style inverted flare fittings are used. The 90° geometry changes flow direction while maintaining thread compatibility for standard AN and inverted flare hoses. Verify hose end types and thread pitch on both sides before purchase to ensure fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAN6 male: 9\/16\"-18 UNF thread standard\u003c\/li\u003e\n  \u003cli\u003eInverted flare: 5\/8\" x 18 IFM thread for 3\/8\" SAE lines\u003c\/li\u003e\n  \u003cli\u003e90° elbow with swivel to orient hose without twisting threads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install this adapter for best results?\u003c\/h3\u003e\n\u003cp\u003eProfessional installation is recommended, especially when working on steering or fuel systems. Hand-start threads to avoid cross-threading, tighten to the proper torque, then rotate the swivel portion to align the hose. Inspect for leaks under pressure and re-torque if necessary after initial run-in.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-start threads and avoid cross-threading\u003c\/li\u003e\n  \u003cli\u003eTighten to manufacturer torque specs, then align swivel\u003c\/li\u003e\n  \u003cli\u003ePressure-test system and re-check fittings after initial use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Podavelle AN6 to 5\/8-18 inverted flare 90° adapter is intended for mechanics, tuners, and DIY enthusiasts who need to adapt AN6 lines to inverted flare power steering or fluid systems in tight engine compartments. It’s a good choice when weight savings, corrosion resistance, and flexible hose routing are priorities. If you’re unsure about compatibility or installation, seek a qualified installer to ensure safe, leak-free operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this adapter compatible with gasoline?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Podavelle lists compatibility with gasoline and alcohol-based fuels; use proper seals and check for leaks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install it myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Professional installation is recommended for steering or pressurized fuel systems to ensure safety and leak-free fitment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Podavelle","offers":[{"title":"Default Title","offer_id":48085376958622,"sku":"B0FF9PXH8J","price":34.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/podavelle-an6-to-5-8-18-90deg-front-view.jpg?v=1785870534","url":"https:\/\/northtrailauto.ca\/products\/podavelle-an6-male-to-5-8-18-inverted-flare-90-adapter-black-anodized-6061-t6-swivel-elbow","provider":"North Trail Auto","version":"1.0","type":"link"}