{"product_id":"polymix-metal-panel-adhesive-metal-panel-bond-60-200ml-cartridge-2-nozzles-urethane-self-sealing","title":"Polymix Metal Panel Adhesive — Metal Panel Bond 60 200ml Cartridge \u0026 2 Nozzles, Urethane Self-Sealing","description":"\u003cp\u003e\u003cstrong\u003ePolymix Metal Panel Bond 60 is a two-part urethane adhesive in a 200ml cartridge with two mixing nozzles, engineered to securely bond steel and aluminum panels without welding.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis ready-to-use adhesive system replaces many traditional welding tasks by offering a high-strength, self-sealing bond for automotive and utility sheet-metal repairs. Supplied in a dual-cartridge format with two application mixing nozzles, Metal Panel Bond 60 is designed for panel replacement jobs including quarter panels, roofs, van sides and door skins. It reduces prep work, protects against heat distortion and seals joints for a finished surface ready for painting.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Polymix Metal Panel Bond 60 make panel replacement faster and cleaner?\u003c\/h3\u003e\n\n\u003cp\u003eInstead of spot welding, this urethane eliminates several time-consuming steps: internal panel removal, grinding, re-shaping metal warped by heat, and disconnecting electronics. Because the adhesive is self-sealing and cures to a durable joint, it shortens repair cycles and reduces the risk of corrosion at bonded seams.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSelf-sealing formula removes need for separate seam sealer.\u003c\/li\u003e\n  \u003cli\u003eCold-application avoids heat-induced metal distortion.\u003c\/li\u003e\n  \u003cli\u003eMinimizes disassembly—no need to access internal cavities for welds.\u003c\/li\u003e\n  \u003cli\u003eWorks on both steel and aluminum substrates common in vehicle bodies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces and repair types is this adhesive intended for?\u003c\/h3\u003e\n\n\u003cp\u003ePolymix Metal Panel Bond 60 is formulated specifically for automotive-style sheet metal repairs where strong structural adhesion is required. Typical uses include replacing quarter panels, roof skins, box sides, van and utility vehicle side panels, and door skins where welding would normally be used.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSteel and aluminum panel bonding for body repairs.\u003c\/li\u003e\n  \u003cli\u003ePanel-to-panel joints and perimeter bonding for skins and outer shells.\u003c\/li\u003e\n  \u003cli\u003eIdeal for areas where heat from welding could damage paint or electronics.\u003c\/li\u003e\n  \u003cli\u003eSuitable for structural adhesive applications on vehicle bodies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the product applied, and what comes in the kit?\u003c\/h3\u003e\n\n\u003cp\u003eThe product arrives in a 200ml dual-cartridge that dispenses the correct resin and hardener ratio through an included static mixing nozzle for consistent cure. Application is straightforward with a standard dual-cartridge gun; after dispensing, press panels together and clamp as required until handling strength is reached.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e200ml dual-component cartridge ensures accurate mix ratio.\u003c\/li\u003e\n  \u003cli\u003eTwo static mixing nozzles included for reliable, bubble-free dispensing.\u003c\/li\u003e\n  \u003cli\u003eCompatible with common dual-cartridge caulking guns used in bodyshops.\u003c\/li\u003e\n  \u003cli\u003eClamping or spot-tack supports until full handling strength develops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the durability and finishing considerations?\u003c\/h3\u003e\n\n\u003cp\u003eThe cured urethane produces a tough, flexible bond that resists environmental exposure and acts as its own seam sealer, reducing the need for additional corrosion protection at the joint. After cure, surfaces can be prepared and painted according to standard shop practices; there’s no requirement for special rust primers solely because of the adhesive.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eProvides a weather-resistant, self-sealing joint.\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard body fillers and paints after proper surface prep.\u003c\/li\u003e\n  \u003cli\u003eMaintains bond strength without welding-related heat damage.\u003c\/li\u003e\n  \u003cli\u003eReduces likelihood of rust forming under sealed seams.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Polymix Metal Panel Bond 60 is tailored for professional bodyshops, restoration specialists and skilled DIYers who perform panel replacement or structural sheet-metal repairs on cars, vans and light utility vehicles. It’s especially useful when avoiding heat, preserving internal components, and obtaining a sealed, paint-ready joint are priorities. If you need a high-strength, two-part adhesive solution that simplifies panel swaps and reduces prep time, this kit delivers consistent mixing and application for reliable results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can Polymix Metal Panel Bond 60 replace welding for automotive panels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It bonds steel and aluminum panels for many panel replacements while avoiding welding heat and related prep work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to apply this adhesive?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a standard dual-cartridge caulking gun; two static mixing nozzles are included for proper mixing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Polymix","offers":[{"title":"Default Title","offer_id":48083243532446,"sku":"B0BG968PFL","price":58.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/polymix-metal-panel-bond-60-front-packaging.jpg?v=1785829480","url":"https:\/\/northtrailauto.ca\/products\/polymix-metal-panel-adhesive-metal-panel-bond-60-200ml-cartridge-2-nozzles-urethane-self-sealing","provider":"North Trail Auto","version":"1.0","type":"link"}