{"product_id":"rapidfix-uv-fiber-repair-patch-3x-6","title":"RapidFix UV Fiber Repair Patch 3\"x 6\"","description":"\u003cp\u003e\u003cstrong\u003eTear Mender RapidFix UV Fiber Repair Patch 3\" x 6\" is a self-adhesive, fiberglass-reinforced polyester patch that cures quickly with ultraviolet light or sunlight to create a long-lasting repair.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 3\" x 6\" RapidFix UV Fiber Patch from Tear Mender is made for fast, durable fixes on a wide range of surfaces. The patch uses fiberglass-reinforced polyester cloth with an adhesive that activates and hardens under UV light—making it ideal for emergency mends and planned repairs alike. It adheres to most common materials, dries to a solid finish you can sand or paint, and resists many chemicals and oils. Because it’s non-flammable and non-toxic, it’s suited for indoor and outdoor use where a robust, ready-to-use patch is needed.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly does the patch cure and become usable?\u003c\/h3\u003e\n\u003cp\u003eThe RapidFix patch is formulated for a fast cure when exposed to strong ultraviolet light. With a dedicated UV lamp or bright sunlight, the patch hardens in about 5 to 10 minutes; on cloudy days, expect up to 50 minutes for a full cure. Once cured, the repair can be drilled, sanded, or painted—allowing you to finish the job cleanly and quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e5–10 minute cure under UV lamp or bright sun\u003c\/li\u003e\n  \u003cli\u003eUp to 50 minutes in overcast conditions\u003c\/li\u003e\n  \u003cli\u003eDrillable, sandable, and paintable after curing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces and projects is the patch best for?\u003c\/h3\u003e\n\u003cp\u003eThe fiberglass-reinforced polyester construction bonds to most materials used in vehicles, marine and home repairs. It’s particularly useful for bumper fixes, headlamp housings, fiberglass truck bodies, and interior or exterior vehicle parts. In addition to automotive work, it is suitable for plumbing, roofing, gutters, tanks, and many metal or siding repairs—just avoid polypropylene (PP) where adhesion is limited.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomotive: bumpers, headlamp housings, RV\/trailer panels\u003c\/li\u003e\n  \u003cli\u003ePlumbing and drainage: pipes, ducting, metal covers\u003c\/li\u003e\n  \u003cli\u003eExterior repairs: roofs, gutters, tanks, siding, power poles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the patch perform long-term and under chemical exposure?\u003c\/h3\u003e\n\u003cp\u003eThe Tear Mender RapidFix patch is engineered to form a strong, long-lasting bond that resists many common solvents, oils, and chemicals. Once cured, the fiberglass-reinforced polyester becomes rigid and stable, reducing the chance of re-tear or degradation in typical environments. While resistant to many substances, the patch is not suitable for continuous contact with some aggressive chemicals—test in a small area when unsure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFiberglass reinforcement for structural strength\u003c\/li\u003e\n  \u003cli\u003eResists common chemicals, solvents, and oils\u003c\/li\u003e\n  \u003cli\u003eNot recommended for continuous exposure to aggressive chemicals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat preparation and finishing steps are needed for a neat repair?\u003c\/h3\u003e\n\u003cp\u003eGood surface preparation improves adhesion and final appearance. Clean and dry the repair area, remove loose or flaking material, and roughen very smooth surfaces to help bonding. After applying the patch and curing under UV light, you can trim, drill, sand, and paint the area to blend the repair with surrounding material.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean and dry surface before application\u003c\/li\u003e\n  \u003cli\u003eRoughen smooth areas for better adhesion\u003c\/li\u003e\n  \u003cli\u003eTrim, sand, drill, and paint after full cure for a finished look\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Tear Mender RapidFix UV Fiber Repair Patch 3\" x 6\" is for DIYers, mechanics, RV and boat owners, contractors, and facilities teams who need a fast, reliable patch that cures with sunlight or a UV lamp. It’s a go-to option when a strong, sandable, and paintable repair is required on automotive panels, fiberglass components, plumbing runs, roofs, or metal surfaces—especially when time and ease of application matter.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the patch stick to plastic bumpers and fiberglass?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—bonds well to most plastics and fiberglass. It does not adhere reliably to polypropylene (PP).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I sand and paint the patch after curing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—after full UV cure the patch can be drilled, sanded, and painted for a finished repair.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Tear Mender","offers":[{"title":"Default Title","offer_id":48086975479966,"sku":"B0725J3J8Y","price":30.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/tear-mender-rapidfix-front-packaging.jpg?v=1785911625","url":"https:\/\/northtrailauto.ca\/products\/rapidfix-uv-fiber-repair-patch-3x-6","provider":"North Trail Auto","version":"1.0","type":"link"}