{"product_id":"roadformer-hose-clamps-52-76mm-2-05-3-in-10-pack-full-300-series-stainless-inner-worm-gear","title":"ROADFORMER Hose Clamps 52–76mm (2.05–3 in) 10-Pack — Full 300‑Series Stainless, Inner Worm‑Gear","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 2.5\" hose clamps are a 10-pack of full 300-series stainless steel worm-gear clamps sized for 52–76mm (2.05\"–3\") hoses and tubes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese clamps are built with all-stainless components — band, housing and 5\/16\" slotted hex screw — to resist corrosion and stand up to repeated tightening, outdoor exposure and marine conditions. The inner worm-gear design lets you fine-tune the diameter for a snug fit on hoses, pipes, cables and lines. This product page explains what they do, how they perform and where they work best so you can choose the right clamp for your project.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps adjust to different hose sizes?\u003c\/h3\u003e\n\u003cp\u003eThe ROADFORMER clamps use an internal worm-gear mechanism that threads the band through the housing as you turn the screw, allowing smooth, incremental diameter changes. Their working range covers 52–76mm (about 2.05\"–3\"), giving flexibility for a variety of small- to medium-diameter hoses and fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable span: 52mm–76mm (2.05\"–3\").\u003c\/li\u003e\n  \u003cli\u003eFine control via slotted 5\/16\" hex head screw.\u003c\/li\u003e\n  \u003cli\u003eInner worm gear for even pressure and minimal slippage.\u003c\/li\u003e\n  \u003cli\u003eRecommended to match clamp OD to hose outer diameter for best seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and strength can I expect?\u003c\/h3\u003e\n\u003cp\u003eEvery metal part is made from 300-series stainless steel, chosen for rust resistance and longevity in wet or salty environments. The clamps are rated for practical installation torque and can hold substantial tightening force without striping or deformation when used correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull 300-series stainless steel construction: band, housing, screw.\u003c\/li\u003e\n  \u003cli\u003eInstallation torque range: 35–45 in·lbs (4.0–5.1 Nm) recommended.\u003c\/li\u003e\n  \u003cli\u003eUltimate torque capacity: minimum 60 in·lbs (≈6.8 Nm).\u003c\/li\u003e\n  \u003cli\u003eDesigned to resist corrosion and extend service life in harsh conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere are these hose clamps best applied?\u003c\/h3\u003e\n\u003cp\u003eThese clamps are versatile for many trades and home uses — automotive hose connections, agricultural irrigation lines, plumbing repairs, and marine lines. They perform well both indoors and outdoors and are suitable for securing tubes, cables and hoses in permanent or temporary installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomotive: heater hoses, breather lines, coolant connections.\u003c\/li\u003e\n  \u003cli\u003eAgriculture and construction: small irrigation and fluid lines.\u003c\/li\u003e\n  \u003cli\u003eMarine and outdoor: corrosion-resistant for wet environments.\u003c\/li\u003e\n  \u003cli\u003eHousehold and DIY: appliance hoses, workshop piping and cable bundling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy are these to install and maintain?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward with a standard screwdriver or 5\/16\" hex driver; the smooth worm gear reduces binding and helps center the band for an even clamp. Maintenance is minimal — periodic inspection and re-torquing if used in high-vibration or seasonal installations keeps seals reliable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse slotted screwdriver or 5\/16\" hex driver for quick tightening.\u003c\/li\u003e\n  \u003cli\u003eInner worm gear reduces band twisting for a uniform seal.\u003c\/li\u003e\n  \u003cli\u003eInspect and re-torque after initial use or long-term vibration exposure.\u003c\/li\u003e\n  \u003cli\u003eSupplied as a set: 10 pieces per package for multiple repairs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ROADFORMER 2.5\" stainless hose clamp set is aimed at mechanics, boat owners, farmers, tradespeople and DIYers who need corrosion-resistant, adjustable clamps for 52–76mm hoses and tubing. If you want a reliable multi-use clamp set with full stainless construction and predictable torque characteristics, this 10-pack is a practical, cost-effective choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What hose diameters do these clamps fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They adjust from 52mm to 76mm (about 2.05\"–3\"), so choose based on your hose outer diameter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these clamps rust-resistant for marine use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are made entirely from 300-series stainless steel to resist corrosion in wet and marine environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":48087003824286,"sku":"B086MJW9QF","price":33.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/roadformer-front-packaging_d1e66572-0d7a-44fd-9db7-090936b1a2f3.jpg?v=1785913111","url":"https:\/\/northtrailauto.ca\/products\/roadformer-hose-clamps-52-76mm-2-05-3-in-10-pack-full-300-series-stainless-inner-worm-gear","provider":"North Trail Auto","version":"1.0","type":"link"}