{"product_id":"rupes-150mm-white-d-a-ultra-fine-polishing-foam-pads-pack-of-2-5-backing-plate-compatible-finishing-gloss-low-swirl","title":"RUPES 150mm White D-A Ultra-Fine Polishing Foam Pads (Pack of 2) — 5\" Backing Plate Compatible, Finishing Gloss \u0026 Low-Swirl","description":"\u003cp\u003e\u003cstrong\u003eRUPES 150mm White D-A Ultra-FINE Polishing Foam Pads are precision foam discs designed for the final refining and ultra-fine polishing step on dual-action polishers to boost gloss while minimizing swirl marks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese 150mm (approximately 6\") white ultra-fine foam pads from RUPES are built specifically for dual-action (D-A) polishers and pair with 5\" backing plates. They are intended for the last stages of paint correction where refining clarity and surface uniformity matter most. Constructed from open-cell foam, the pads balance product distribution and heat dissipation to reduce clogging and prevent pad breakdown during repeated use.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these pads improve final gloss and clarity?\u003c\/h3\u003e\n\u003cp\u003eThe white ultra-fine foam has a softer, low-friction structure that helps lift micro-marring left by more aggressive stages without reintroducing new swirls. When matched with a light compound or finishing polish, it refines the paint surface to reveal depth and enhance reflectivity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUltra-fine cell structure reduces micro-marring and hazing\u003c\/li\u003e\n  \u003cli\u003eOptimized for finishing polishes and glazes to maximize shine\u003c\/li\u003e\n  \u003cli\u003eOpen-cell design promotes even product spread for consistent results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these pads fit my machine and how are they best used?\u003c\/h3\u003e\n\u003cp\u003eEach pad is sized to work with 150mm (approx. 6\") surfaces and is compatible with common 5\" hook-and-loop backing plates used on D-A polishers. Use moderate speed and light pressure for finishing passes, and allow the pad to float across panel curves to avoid heat buildup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for dual-action polishers and 5\" backing plates\u003c\/li\u003e\n  \u003cli\u003eRecommended light to moderate pressure and lower speeds for finishing\u003c\/li\u003e\n  \u003cli\u003eUse short, overlapping passes for uniform refinement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I clean and maintain these foam polishing pads?\u003c\/h3\u003e\n\u003cp\u003eCleaning is straightforward: rinse with warm water and a mild soap or pad-cleaning solution immediately after use to flush out compounds and polish residues. Squeeze water through the foam without twisting, then air-dry foam-side down to keep the pad shape and extend its usable life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRinse under warm water with gentle soap to remove residues\u003c\/li\u003e\n  \u003cli\u003eAvoid machine wringing; hand-squeeze and air dry foam-side down\u003c\/li\u003e\n  \u003cli\u003eInspect for tears or compressed areas; replace when shape is compromised\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kinds of surfaces and corrections are these pads suitable for?\u003c\/h3\u003e\n\u003cp\u003eThese pads are intended for extremely fine correction, refining and final polishing on automotive paint, clear coats and other polished surfaces. They work well after compounding stages to remove light defects and boost gloss, and they adapt to a range of finishing products.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for final polishing on clear coats and painted surfaces\u003c\/li\u003e\n  \u003cli\u003eSuited for finishing polishes, glazes and light defect removal\u003c\/li\u003e\n  \u003cli\u003eCompatible with many polishing products; always test on a small area first\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The RUPES 150mm White D-A Ultra-FINE pads (pack of 2) are for professional detailers and serious enthusiasts who need consistent, high-gloss finishing performance from a dual-action setup. If you perform final-stage polishing, work with delicate paint finishes, or want pads that resist clogging and retain shape through repeated uses, these pads offer a dependable option. They pair especially well with finishing polishes and are a practical addition to a multi-step paint correction workflow.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these pads safe for clear coat finishes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The ultra-fine foam is designed for final-stage polishing on clear coats, minimizing micro-marring when used with light finishing products.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace the pads?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace when the foam shows tears, compression or uneven surface—typically after many uses if cleaned and dried properly between sessions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"RUPES","offers":[{"title":"Default Title","offer_id":48084586332318,"sku":"B08J1BLH6T","price":33.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/rupes-150mm-white-d-a-pad-front-view.jpg?v=1785860055","url":"https:\/\/northtrailauto.ca\/products\/rupes-150mm-white-d-a-ultra-fine-polishing-foam-pads-pack-of-2-5-backing-plate-compatible-finishing-gloss-low-swirl","provider":"North Trail Auto","version":"1.0","type":"link"}