{"product_id":"saree-4-lug-2000-lb-trailer-hub-kit-4x4-fits-1-1-1-16-straight-spindles-black-coated-2-pack","title":"Saree 4-Lug 2000 lb Trailer Hub Kit 4x4\" – Fits 1\"\/1-1\/16\" Straight Spindles, Black Coated 2-Pack","description":"\u003cp\u003e\u003cstrong\u003eSaree 4-lug hub kit is a complete 2000 lb-rated trailer hub assembly for straight spindles, supplied as two full hub sets including bearings, seals, dust caps and lug nuts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis dual-pack hub kit is built for light trailers and boats that use 4×4\" 4-bolt hubs and straight spindles of either 1\" or 1-1\/16\" diameter. Each kit ships with both bearing sizes, two grease-seal sizes, dust caps and hardened lug nuts so installers can adapt the hub to the correct spindle diameter without extra shopping. The hubs are black coated and salt-spray tested for corrosion resistance, and critical parts meet common US manufacturing standards for durability and fit.\u003c\/p\u003e\n\n\u003ch3\u003eWill these hubs fit my trailer spindle?\u003c\/h3\u003e\n\u003cp\u003eThese hubs are designed specifically for straight spindles only — they will not adapt to tapered spindles. The kit includes L44643 bearings for 1\" spindles and L44649 bearings for 1-1\/16\" spindles, plus two grease-seal inner diameters to match each size so you can fit either spindle diameter without additional parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 1\" and 1-1\/16\" straight spindles (not tapered)\u003c\/li\u003e\n  \u003cli\u003eIncludes L44643 (1\" ID) and L44649 (1-1\/16\" ID) bearings\u003c\/li\u003e\n  \u003cli\u003eTwo grease seals: 1.25\" ID and 1.5\" ID (O.D. 1.98\")\u003c\/li\u003e\n  \u003cli\u003eSold as 2 complete hub kits for dual-axle setups or spares\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts come in each 2-set package?\u003c\/h3\u003e\n\u003cp\u003eThe package supplies everything needed to install two 4-lug hubs on a trailer axle rated to 2,000 pounds per axle. It’s intended as a near-complete hub replacement kit, though castle nuts are not included.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2 hub kits (4-lug, rated 2,000 lbs each)\u003c\/li\u003e\n  \u003cli\u003e4 L44649 bearings and 4 L44643 bearings (total of 8 bearings)\u003c\/li\u003e\n  \u003cli\u003e8 lug nuts (1\/2\"-20 thread) and 4 dust caps (O.D. 1.98\")\u003c\/li\u003e\n  \u003cli\u003e2 cotter pins (2.3\" long) and 4 grease seals (two sizes)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion-resistant are these hubs?\u003c\/h3\u003e\n\u003cp\u003eSaree hubs are manufactured to a high standard and undergo coating and corrosion testing to extend service life in marine and road environments. The hubs feature a black protective coating and components such as dust caps are galvanized for added wear resistance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlack-coated finish with 96-hour salt spray testing\u003c\/li\u003e\n  \u003cli\u003eGalvanized dust covers to resist wear and rust\u003c\/li\u003e\n  \u003cli\u003eLug nuts hardened to 10.9 to reduce fracture risk\u003c\/li\u003e\n  \u003cli\u003eHigh-quality bearing steel for lower noise and friction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I prepare for installation?\u003c\/h3\u003e\n\u003cp\u003eBefore mounting, confirm your spindle is straight (not tapered) and measure its diameter to choose the correct bearing and seal from the kit. Gather the required tools and, if replacing hubs on both sides, use the included parts to rebuild one axle at a time for safety and alignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify spindle type and measure diameter (1\" or 1-1\/16\")\u003c\/li\u003e\n  \u003cli\u003eHave castle nuts and grease gun (not included) ready\u003c\/li\u003e\n  \u003cli\u003eInstall bearings, seals and torque lug nuts to manufacturer specs\u003c\/li\u003e\n  \u003cli\u003eReplace one side at a time for controlled alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Saree dual-hub kit is aimed at owners of small trailers, utility trailers and boat trailers needing a reliable 2,000 lb-rated hub replacement that fits straight spindles of 1\" or 1-1\/16\". It's also useful for DIY installers and small shops that value a complete parts set — bearings, seals, dust caps and lug hardware — packed to protect components during shipping.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these hubs be used on tapered spindles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These hubs are made only for straight spindles. They include bearings and seals for 1\" and 1-1\/16\" straight spindles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are castle nuts included in the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Castle nuts are not included. The kit supplies hubs, bearings, seals, dust caps, lug nuts and cotter pins.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Saree","offers":[{"title":"Default Title","offer_id":48079881076894,"sku":"B0D12HXGSZ","price":99.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/saree-front-facing-hub-packaging.jpg?v=1785774164","url":"https:\/\/northtrailauto.ca\/products\/saree-4-lug-2000-lb-trailer-hub-kit-4x4-fits-1-1-1-16-straight-spindles-black-coated-2-pack","provider":"North Trail Auto","version":"1.0","type":"link"}