{"product_id":"savildo-pneumatic-slide-hammer-dent-puller-kit-21-slide-hammer-with-3-suction-cups-vacuum-control","title":"Savildo Pneumatic Slide Hammer Dent Puller Kit — 21\" Slide Hammer with 3 Suction Cups, Vacuum Control","description":"\u003cp\u003e\u003cstrong\u003eSavildo's upgraded pneumatic slide-hammer dent puller is a heavy-duty, paint-safe tool kit that removes medium to large panel dents using powerful vacuum suction and a 3 lb sliding hammer.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis professional-grade dent removal kit pairs a galvanized-steel slide hammer with three rubber suction pads and pneumatic vacuum control so you can pull out severe dings without drilling, welding, or damaging paint. Built for garages and DIYers alike, the 21\" slide hammer and 4-3\/4\" cup handle thicker panels and deeper creases while the brass shutoff valve and 1\/4\" air inlet deliver consistent, controllable force.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this tool extract stubborn dents without harming paint?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses pneumatic suction rather than glue or mechanical welding to lift dents. A strong vacuum created through the air inlet seals the rubber cup to the panel; the slide hammer then applies shock force to pull the metal back into shape while the original paint and finish remain intact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGalvanized-steel slide hammer with a 3 lb (1.36 kg) weight for impactful pulls\u003c\/li\u003e\n  \u003cli\u003e4-3\/4\" rubber suction cup provides broad contact to avoid paint stress\u003c\/li\u003e\n  \u003cli\u003eBrass shutoff valve lets you control vacuum and release safely\u003c\/li\u003e\n  \u003cli\u003eNo drilling, welding, sanding, or adhesive residue\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat dents and panels can the Savildo slide hammer handle?\u003c\/h3\u003e\n\u003cp\u003eThis tool is designed for medium-to-large dents and sagging panels on cars, trucks, and many metal appliances. It excels where an adhesion puller might fail—deeper creases, wider low spots, and areas where stronger, repeatable force is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for auto body panels on most vehicles (steel and compatible metals)\u003c\/li\u003e\n  \u003cli\u003eEffective on larger dents, sagging panels, and some crease repairs\u003c\/li\u003e\n  \u003cli\u003eAlso works on refrigerators, motorcycles, washing machines, and similar sheet-metal items\u003c\/li\u003e\n  \u003cli\u003eNot intended for extremely sharp punctures or heavily rusted, brittle metal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the technical specs and setup steps?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships as a compact 20\" x 5\" x 5\" set weighing about 4.6 lb (2 kg). Hook the 1\/4\" air inlet to a 3\/8\" hose, regulate pressure to around 90 PSI, position the chosen suction cup, engage vacuum, and use the slide hammer to extract the dent.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlide hammer length: 620 mm (approx. 21\"); hammer weight: 3 lb (1.36 kg)\u003c\/li\u003e\n  \u003cli\u003eAir inlet: 1\/4\" with recommended air pressure ~90 PSI and 3\/8\" hose\u003c\/li\u003e\n  \u003cli\u003eIncluded: slide hammer and 3 rubber suction cups (4.5 in pads)\u003c\/li\u003e\n  \u003cli\u003eMaterials: galvanized steel hammer, rubber suction pads, brass valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit compare to taking a vehicle to a body shop?\u003c\/h3\u003e\n\u003cp\u003eUsing the Savildo slide-hammer kit can lower repair costs by letting you perform many paintless dent repairs yourself. While a body shop may be needed for complex paint or structural work, this kit addresses many common dents quickly and repeatedly at a fraction of the service price.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick, on-the-spot repairs for many dent types save time and labor\u003c\/li\u003e\n  \u003cli\u003eRe-usable suction cups and robust steel construction reduce long-term cost\u003c\/li\u003e\n  \u003cli\u003eRetains original factory paint—no repainting required for many repairs\u003c\/li\u003e\n  \u003cli\u003eProfessional-grade power without specialized welding or body-shop equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Hobbyist mechanics, mobile detailers, small-body-shop technicians, and DIY vehicle owners who want a durable, paint-friendly solution for moderate to severe panel dents will benefit most from the Savildo pneumatic slide-hammer kit. If you need a reusable, heavy-duty dent puller that offers controlled vacuum force and a strong sliding hammer without drilling or welding, this kit is designed to provide that capability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit remove large or deep dents?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—its 3 lb slide hammer and pneumatic suction can handle medium-to-large dents and sagging panels, but not severe punctures or severely corroded metal.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special air equipment to use it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You need an air compressor with a 1\/4\" connector and 3\/8\" hose able to supply around 90 PSI for optimal performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savildo","offers":[{"title":"Default Title","offer_id":48080861135006,"sku":"B0CDQCDMTY","price":65.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/savildo-front-view-slide-hammer-kit.jpg?v=1785790991","url":"https:\/\/northtrailauto.ca\/products\/savildo-pneumatic-slide-hammer-dent-puller-kit-21-slide-hammer-with-3-suction-cups-vacuum-control","provider":"North Trail Auto","version":"1.0","type":"link"}