{"product_id":"senven-rv-roof-sealant-white-1-gallon-waterproof-solar-reflective-elastomeric-coating","title":"SENVEN RV Roof Sealant White 1 Gallon — Waterproof, Solar-Reflective Elastomeric Coating","description":"\u003cp\u003e\u003cstrong\u003eSENVEN RV Roof Sealant is a one-gallon, water-based, white elastomeric coating that creates a waterproof, solar-reflective membrane to protect trailers, campers, and motorhomes from leaks and heat.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you want a practical roof coating engineered for recreational vehicles, this product offers a paint-on liquid rubber system that seals seams, shields surfaces from UV and heat, and extends roof life. The formula is water-based and zero-VOC for safer application and storage, and it’s compatible with common RV roof materials like EPDM, TPO, fiberglass, and aluminum when used with the recommended primer and seam products.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sealant stop leaks and protect my RV roof?\u003c\/h3\u003e\n\u003cp\u003eThe SENVEN coating cures into an elastic waterproof membrane that bridges small cracks and fills surface imperfections. Its flexible nature accommodates roof movement, while recommended accessories (lap sealant and seam tape) reinforce transitions and penetrations for a complete system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eElastomeric liquid rubber forms a continuous water-resistant barrier\u003c\/li\u003e\n  \u003cli\u003eWorks over vents, skylights, and roof transitions when combined with seam tape\u003c\/li\u003e\n  \u003cli\u003eAdheres to multiple substrates; use EPDM\/TPO primer where specified\u003c\/li\u003e\n  \u003cli\u003eRoll-on application for uniform coverage and thickness control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this coating keep the camper cooler in hot weather?\u003c\/h3\u003e\n\u003cp\u003eThe white, solar-reflective finish reduces heat absorption compared with darker surfaces, lowering rooftop temperatures and easing interior heat gain. While results depend on roof construction and climate, reflective coatings help cut cooling load and can extend the roof material’s useful life by reducing thermal stress.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-reflectivity white finish disperses solar energy\u003c\/li\u003e\n  \u003cli\u003eElastomeric layer reduces thermal cycling and stress on roof materials\u003c\/li\u003e\n  \u003cli\u003eCan decrease interior temperatures when combined with proper ventilation\u003c\/li\u003e\n  \u003cli\u003eImproves long-term material durability by lowering UV\/heat exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces and prep steps are required for best adhesion?\u003c\/h3\u003e\n\u003cp\u003eSENVEN is designed to coat EPDM, TPO, fiberglass, and aluminum roofs, but optimal adhesion on EPDM and TPO needs the recommended Liquid Rubber EPDM Primer. Proper surface preparation—cleaning, degreasing, and removing loose material—ensures a durable bond and even finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean roof thoroughly; remove dirt, oils, and loose coating\u003c\/li\u003e\n  \u003cli\u003ePrime EPDM\/TPO with compatible primer before applying coating\u003c\/li\u003e\n  \u003cli\u003eSeal joints, seams, and fasteners with lap sealant and seam tape for movement areas\u003c\/li\u003e\n  \u003cli\u003eApply at recommended coverage: about 1 gallon per 50 sq ft for final thickness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much coverage and maintenance should I expect?\u003c\/h3\u003e\n\u003cp\u003eCoverage depends on surface profile and desired thickness; plan roughly 1 gallon per 50 square feet to reach the recommended protective layer. For a typical 30-foot RV, a 1–5 gallon pail range is suggested; use up material on the project and keep spare sealed for future touch-ups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEstimate coverage: ~50 sq ft per gallon for final coat thickness\u003c\/li\u003e\n  \u003cli\u003eOne 5-gallon pail typically covers an average 30-foot RV roof\u003c\/li\u003e\n  \u003cli\u003eStore unused, sealed pail above freezing for later repairs\u003c\/li\u003e\n  \u003cli\u003eRoutine inspections and touch-ups at penetrations extend protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? SENVEN RV Roof Sealant suits RV owners, fleet managers, and DIY technicians who want a long-lasting, non-solvent roof protection system that combines waterproofing with solar-reflective benefits. It's appropriate for those who prefer a water-based, low-VOC product and are willing to follow surface prep and use compatible primers and seam products for best performance. If you need a flexible coating to seal leaks, reduce roof heat gain, and create a maintainable roof system for campers, trailers, or motorhomes, this product is built for that purpose.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is SENVEN RV Roof Sealant safe to use on EPDM and TPO?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it’s compatible, but for EPDM and TPO you should use the recommended EPDM primer for best adhesion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much area does one gallon cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Plan about 50 square feet per gallon for the final protective thickness; actual coverage varies with surface texture.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SENVEN","offers":[{"title":"Default Title","offer_id":48080908681374,"sku":"B0F9BD9DW9","price":75.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/senv_n-front-pail-roof-coating.jpg?v=1785792047","url":"https:\/\/northtrailauto.ca\/products\/senven-rv-roof-sealant-white-1-gallon-waterproof-solar-reflective-elastomeric-coating","provider":"North Trail Auto","version":"1.0","type":"link"}