{"product_id":"sika-sikaflex-p2g-premium-primerless-automotive-windshield-urethane-adhesive-300-ml-3-hr-drive-away-fast-curing","title":"SIKA Sikaflex P2G Premium primerless automotive windshield urethane adhesive 300 ml — 3-hr drive-away, fast-curing","description":"\u003cp\u003e\u003cstrong\u003eSikaflex P2G Premium is a primerless, fast-curing polyurethane adhesive engineered to secure and seal automotive glass with a 3-hour minimum drive-away time.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis updated Sikaflex P2G formulation delivers high-viscosity bonding for direct-glazed windshields, backglasses and stationary side or roof glass without requiring a Sika Aktivator or glass primer on the glass or ceramic frit. Designed for professional auto glass technicians, the product reduces volatile organic compounds and odor while offering improved decking control and glass slip behavior at service temperatures.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will a vehicle be ready to drive after installation?\u003c\/h3\u003e\n\u003cp\u003eSikaflex P2G Premium reaches a minimum drive-away condition in approximately three hours under recommended conditions. Actual MDAT can vary with ambient temperature, humidity and adhesive bead size, so technicians should confirm cure status before releasing the vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical Minimum Drive-Away Time: 3 hours\u003c\/li\u003e\n  \u003cli\u003eCure depends on temperature, humidity, and joint geometry\u003c\/li\u003e\n  \u003cli\u003eFaster curing at warmer temperatures within specified range\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo I need a primer or activator for glass or ceramic frit?\u003c\/h3\u003e\n\u003cp\u003eNo glass or ceramic frit primer is required for this primerless urethane on direct-glazed glass surfaces. However, certain substrates such as bare metal, fresh paint, plastics or encapsulated parts still require Sika 207 primer to ensure safe, long-term adhesion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo Sika Aktivator needed for glass\/frit\u003c\/li\u003e\n  \u003cli\u003eUse Sika 207 primer on metal, fresh paint, and plastics\u003c\/li\u003e\n  \u003cli\u003eFollow AGR and Sika application guidelines for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the working and application temperature limits?\u003c\/h3\u003e\n\u003cp\u003eSikaflex P2G Premium is formulated to be dispensed and perform across a broad range of service temperatures. Technicians can apply the product when ambient temperatures are between 40°F and 110°F; warmer conditions accelerate cure, while colder conditions slow it.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApplication range: 40°F to 110°F (4°C to 43°C)\u003c\/li\u003e\n  \u003cli\u003eWorking time: up to about 15 minutes depending on bead size\u003c\/li\u003e\n  \u003cli\u003eUse correct gun (26:1 thrust ratio) for smooth dispensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and performance standards does this adhesive meet?\u003c\/h3\u003e\n\u003cp\u003eThe adhesive is non-conductive and engineered to meet FMVSS 212 safety requirements when used correctly by trained professionals. Reduced VOC content lessens odor and exposure risks compared with prior formulations, but proper PPE and trained procedures remain essential.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNon-conductive formulation\u003c\/li\u003e\n  \u003cli\u003eMeets FMVSS 212 structural performance when applied per instructions\u003c\/li\u003e\n  \u003cli\u003eLower VOCs and improved odor profile versus earlier variants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Sikaflex P2G Premium is made for auto glass professionals, repair shops and OEM service centers that require a high-performance, primerless urethane for windshield and stationary glass replacement. It’s intended for trained technicians familiar with AGR best practices and Sika’s product instructions; correct dispensing tools (26:1 professional caulk gun) and substrate primers (for metal\/plastic as needed) are required. By following the manufacturer’s application guidelines and safety recommendations, technicians can achieve strong, durable bonds and meet industry safety expectations.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is a glass primer required for Sikaflex P2G Premium?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, glass or ceramic frit primers are not required. Use Sika 207 primer only on bare metal, fresh paint, or plastics.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tool is needed to dispense the 300ml cartridge?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A professional caulk gun with a 26:1 thrust ratio is required to properly dispense the 300ml cartridge.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SIKA","offers":[{"title":"Default Title","offer_id":48080804020382,"sku":"B0FK1GGTP5","price":114.34,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/sika-front-packaging.jpg?v=1785788163","url":"https:\/\/northtrailauto.ca\/products\/sika-sikaflex-p2g-premium-primerless-automotive-windshield-urethane-adhesive-300-ml-3-hr-drive-away-fast-curing","provider":"North Trail Auto","version":"1.0","type":"link"}