{"product_id":"smart-repairboy-ignition-coil-connector-pigtail-harness-kit-4-pack-for-hyundai-kia-1-6-2-0l-2011-2020-18-awg-with-heat-shrink","title":"smart repairboy Ignition Coil Connector Pigtail Harness Kit — 4-Pack for Hyundai\/Kia 1.6–2.0L (2011–2020), 18 AWG with Heat-Shrink","description":"\u003cp\u003e\u003cstrong\u003eThese four ignition coil connector pigtail plugs are replacement harnesses designed to restore reliable electrical connection for Hyundai and Kia 1.6L–2.0L engines from roughly 2011–2020.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle is showing misfire codes, rough idle, or check-engine warnings tied to ignition coils, a worn or damaged coil connector harness can be the cause. This smart repairboy kit includes four plug harnesses built with 18-gauge copper wire and comes with heat-shrink connectors so you can make a durable repair without replacing the entire coil assembly.\u003c\/p\u003e\n\n\u003ch3\u003eWhich cars and engines will these harnesses fit?\u003c\/h3\u003e\n\u003cp\u003eThese pigtail plugs were produced to match the electrical connectors used across many Hyundai and Kia models. Fitment covers common compact and mid-size cars with 1.6L, 1.8L, and 2.0L engines from model years shown below.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHyundai Accent (1.6L 2012–2020), Elantra in several trims (2011–2020), Sonata (1.6L 2015–2018), Tucson (1.6L\/2.0L 2014–2020), Veloster (1.6L 2012–2017).\u003c\/li\u003e\n  \u003cli\u003eKia Forte, Forte Koup, Forte5, Optima (1.6L\/1.8L\/2.0L ranges 2012–2019), Rio and Soul (1.6L\/2.0L 2012–2020).\u003c\/li\u003e\n  \u003cli\u003eReplaces part numbers PT2910 and S2928—verify by comparing the damaged connector to these references before installing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the harness constructed and what materials are used?\u003c\/h3\u003e\n\u003cp\u003eEach pigtail uses 18-gauge copper conductors for consistent conductivity and a 12-inch (about 30 cm) lead length to ease routing during installation. The connectors are designed to match OEM pin spacing and terminal shape so they seat securely on the ignition coil pins.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e18 AWG copper wire for dependable current flow.\u003c\/li\u003e\n  \u003cli\u003e12-inch lead length for flexible placement and routing.\u003c\/li\u003e\n  \u003cli\u003eTerminals formed to align with OEM coil pins for tight fit.\u003c\/li\u003e\n  \u003cli\u003ePackaged with heat-shrink connectors for water-resistant, strain-relieved joints.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included in the package and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains everything required to replace four worn coil connectors: four pigtail harnesses plus eight heat-shrink connectors so both ends of each splice can be protected. Basic hand tools and the ability to make simple electrical splices are all that’s required for installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4 ignition coil plug harnesses (one per cylinder plug location).\u003c\/li\u003e\n  \u003cli\u003e8 heat-shrink connectors to seal and protect splices.\u003c\/li\u003e\n  \u003cli\u003eTools recommended: wire cutters\/strippers, crimping tool or soldering iron, heat gun or lighter for shrink tubing.\u003c\/li\u003e\n  \u003cli\u003eInstallation time: commonly 30–60 minutes depending on vehicle accessibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these harnesses fix engine codes or misfires?\u003c\/h3\u003e\n\u003cp\u003eReplacing a cracked or corroded coil connector can resolve connectivity-related misfires and related diagnostic trouble codes when the ignition coil itself is still functioning. However, if the coil, spark plug, or ECU has failed, the harness alone may not resolve the issue.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGood for electrical-connection faults and cracked wiring insulation.\u003c\/li\u003e\n  \u003cli\u003eNot a solution if the ignition coil or spark plug is defective.\u003c\/li\u003e\n  \u003cli\u003eRecommended to diagnose codes first to confirm connector is the root cause.\u003c\/li\u003e\n  \u003cli\u003ePair with good installation practice for longer service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This smart repairboy 4-piece ignition coil pigtail set suits DIY mechanics, independent shops, and fleet technicians working on Hyundai and Kia vehicles listed above who need a cost-effective way to restore reliable coil connections. If you prefer to replace only damaged wiring instead of expensive OEM coil assemblies, this kit provides the wiring, terminals, and heat-shrink protection needed for a neat, durable repair.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these pigtails match OEM connectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they replicate OEM terminal shape and spacing and replace PT2910\/S2928 for compatible Hyundai and Kia models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install them myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—basic wiring tools and crimping or soldering skills are needed; kit includes heat-shrink for sealed joints.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"smart repairboy","offers":[{"title":"Default Title","offer_id":48084503396510,"sku":"B0DKSV1PPN","price":30.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/smart-repairboy-front-packaging-ignition-coil-pigtail.jpg?v=1785857740","url":"https:\/\/northtrailauto.ca\/products\/smart-repairboy-ignition-coil-connector-pigtail-harness-kit-4-pack-for-hyundai-kia-1-6-2-0l-2011-2020-18-awg-with-heat-shrink","provider":"North Trail Auto","version":"1.0","type":"link"}