{"product_id":"sparkwhiz-recessed-d-ring-tie-down-anchors-4-pack-6-000-lb-capacity-flush-mount-kit","title":"SPARKWHIZ Recessed D-Ring Tie Down Anchors 4-Pack — 6,000 lb Capacity, Flush-Mount Kit","description":"\u003cp\u003e\u003cstrong\u003eSPARKWHIZ Recessed D-Ring Tie Down Anchor Kit is a 4-pack of flush-mount, heavy-duty anchors rated for 6,000 lb straight pull capacity per anchor, supplied with backing plates, fasteners, and a 90 mm hole saw.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you load trailers, flatbeds, or pickup truck beds regularly, reliable recessed anchors make securing cargo faster and safer. This kit gives you every component necessary to install four flush-mounted D-ring tie downs: stainless steel-style D-rings, matching backing plates, bolts, nuts and washers, plus the 90 mm hole saw required for cutting the mounting holes—no extra hardware purchases required.\u003c\/p\u003e\n\n\u003ch3\u003eHow much load can each anchor handle and where is that rating applied?\u003c\/h3\u003e\n\u003cp\u003eEach SPARKWHIZ recessed D-ring is specified for a 6,000 lb straight pull capacity, meaning the anchor can resist a direct single-axis pull up to that value when properly mounted. Ratings depend on correct installation into suitable trailer or vehicle floors and using the included backing plates and fasteners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6,000 lb straight pull capacity per anchor\u003c\/li\u003e\n  \u003cli\u003eDesigned for direct-line loads (tension along the D-ring plane)\u003c\/li\u003e\n  \u003cli\u003ePerformance depends on mounting surface strength and fastener torque\u003c\/li\u003e\n  \u003cli\u003eIncludes backing plate to distribute load and reduce bearing stress\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what tools do I need to install it?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains four D-ring assemblies, four backing plates, all required bolts, nuts, and washers, plus a 90 mm hole saw so you can make the mounting cut without buying extra tools. You will still need common hand tools and a drill to complete installation and to properly torque the fasteners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4 D-ring anchors and 4 backing plates\u003c\/li\u003e\n  \u003cli\u003eFull fastener set: bolts, nuts, washers included\u003c\/li\u003e\n  \u003cli\u003e90 mm hole saw for creating flush mount openings\u003c\/li\u003e\n  \u003cli\u003eAdditional tools: drill, wrench or socket set, silicone or sealant if desired\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these recessed D-rings behave when not in use and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eWhen not deployed, the D-rings fold down to sit flush with the mounting surface, eliminating trip hazards and allowing cargo to sit flat over the anchor points. When you need to secure loads, the rings lift up and lock into position to provide a stable tie-down point.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlush-mounted design minimizes snagging and deck obstructions\u003c\/li\u003e\n  \u003cli\u003eRings lift up for easy attachment of straps or hooks\u003c\/li\u003e\n  \u003cli\u003eBack plates prevent fastener pull-through under heavy loads\u003c\/li\u003e\n  \u003cli\u003eLow-profile appearance preserves trailer and truck-bed utility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these anchors work on my trailer or truck bed floor?\u003c\/h3\u003e\n\u003cp\u003eThese anchors are intended for solid floors like steel or aluminum trailer pans and reinforced pickup bed mounting points; success depends on the substrate thickness and reinforcement. For thin or fragile decking, add structural backing or weld-on reinforcement before loading heavy cargo.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBest for metal trailer floors, reinforced wood decks, and truck beds\u003c\/li\u003e\n  \u003cli\u003eNot recommended for unsupported thin sheet metal without backing\u003c\/li\u003e\n  \u003cli\u003eIncludes backing plates to improve load distribution\u003c\/li\u003e\n  \u003cli\u003eConsider welding or additional reinforcement for maximum ratings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The SPARKWHIZ Recessed D-Ring Tie Down Anchor Kit is aimed at owners and operators of trailers, flatbeds, and pickup trucks who need heavy-duty, low-profile tie-down points. It’s a practical choice for professional haulers, weekend DIYers adding secure anchors to a trailer, and fleet managers standardizing mounting hardware because the kit supplies every installation component, including the hole saw, to get anchors in place quickly and reliably.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include everything needed to mount the anchors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes 4 D-rings, backing plates, bolts, nuts, washers, and a 90 mm hole saw; you only need common hand tools to install.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 6,000 lb rating per anchor or for the whole kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 6,000 lb straight pull capacity is specified per individual anchor when properly mounted with the provided hardware.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SPARKWHIZ","offers":[{"title":"Default Title","offer_id":48083019497630,"sku":"B0BYC547L1","price":64.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/sparkwhiz-front-packaging-and-components.jpg?v=1785822808","url":"https:\/\/northtrailauto.ca\/products\/sparkwhiz-recessed-d-ring-tie-down-anchors-4-pack-6-000-lb-capacity-flush-mount-kit","provider":"North Trail Auto","version":"1.0","type":"link"}