{"product_id":"spta-buffing-polishing-pads-5-pc-6-5-face-6-back-foam-kit-mixed-cut-set-for-compounding-polishing-high-gloss-finish","title":"SPTA Buffing Polishing Pads 5-Pc 6.5\" Face \/ 6\" Back Foam Kit — Mixed-Cut Set for Compounding, Polishing, High-Gloss Finish","description":"\u003cp\u003e\u003cstrong\u003eSPTA Buffing Polishing Pads is a 5-piece mixed-cut foam pad kit designed to attach to a 6-inch backing plate and handle compounding, polishing, and finishing tasks on automotive paint.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit combines five different foam grades — from heavy-cut to ultra-fine — so you can progress from aggressive defect removal to high-gloss finishing without changing brands or pad systems. Each pad pairs with common polishes and fits most rotary, dual-action (DA), and random orbital (RO) polishers via hook-and-loop backing. The dual-diameter face (6.5\" front, 6\" back) reduces pad and plate edge wear while improving compatibility with compounds and reducing surface abrasion.\u003c\/p\u003e\n\n\u003ch3\u003eWhich pad should I use for deep scratches and sanding marks?\u003c\/h3\u003e\n\u003cp\u003eUse the green heavy-cut pad (T120) first; it’s formulated to tackle coarse sanding marks, heavy oxidation, and pronounced defects when paired with a heavy-cut compound. Aggressive correction should be done slowly and checked frequently to avoid overworking the paint.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGreen T120 heavy-cut pad for 1200–1500 grit sanding marks\u003c\/li\u003e\n  \u003cli\u003eBest used with heavy-cut polishing compound\u003c\/li\u003e\n  \u003cli\u003eDesigned for rotary or high-power polishers\u003c\/li\u003e\n  \u003cli\u003eWashable and reusable after use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I transition from correction to a glossy finish?\u003c\/h3\u003e\n\u003cp\u003eProgress through the kit: after heavy cutting, switch to the yellow high-cut (T80) or blue moderate-cut (T60) pads to refine the surface, then finish with the orange medium-cut (T40) and finally the red ultra-fine finishing pad (T10) for gloss. Each step removes the micro-marring left by the previous pad and lifts the shine when used with the appropriate polish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eYellow T80 for heavy-to-medium refinement (1500–2000 grit marks)\u003c\/li\u003e\n  \u003cli\u003eBlue T60 for moderate defects and oxidation\u003c\/li\u003e\n  \u003cli\u003eOrange T40 for fine sanding marks and light oxidation\u003c\/li\u003e\n  \u003cli\u003eRed T10 for swirl-free finishing and high gloss\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these pads fit my polisher and how do I maintain them?\u003c\/h3\u003e\n\u003cp\u003eThe pads have hook-and-loop backing that mates to a 6\" (150 mm) backing plate and are compatible with DA, RO, rotary, and pneumatic polishers. They are made from open-cell foam that breathes and resists heat; after use rinse with water, gently scrub with a pad brush if needed, and air-dry before storage to extend life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFront diameter 6.5\" (165 mm), rear 6\" (150 mm) for plate compatibility\u003c\/li\u003e\n  \u003cli\u003eOpen-cell sponge construction for heat dissipation\u003c\/li\u003e\n  \u003cli\u003eMachine- and hand-washable; use a pad cleaning brush for best results\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop attachment for quick pad changes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this SPTA kit different from other pad shapes?\u003c\/h3\u003e\n\u003cp\u003eThe rounded 6.5\" face with a 6\" backing reduces edge contact and minimizes the chance of pad and paint scuffing compared with aggressive honeycomb or diamond-pattern pads. The balanced mix of foam densities lets detailers dial in correction and finish without swapping to a different pad geometry mid-job.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-size face reduces edge-induced abrasion\u003c\/li\u003e\n  \u003cli\u003eUniversal foam grades work with most compounds and polish brands\u003c\/li\u003e\n  \u003cli\u003eDurable construction resists separation under DA\/RO shear forces\u003c\/li\u003e\n  \u003cli\u003eLightweight and easy to mount for fast workflow changes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The SPTA 5-piece buffing pad kit is aimed at detailers, DIY enthusiasts, and professionals who want a single versatile set to correct paint defects and achieve showroom gloss. It suits owners of rotary and dual-action polishers who need washable, reusable pads that cover aggressive correction through ultra-fine finishing without changing pad systems.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these pads fit a 6-inch backing plate?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The pads have a 6.5\" face and a 6\" rear diameter specifically designed to fit 6-inch backing plates.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I wash and reuse the SPTA foam pads?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are washable and reusable; rinse with water, use a pad brush if needed, and air-dry before storing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SPTA","offers":[{"title":"Default Title","offer_id":48086280536222,"sku":"B017GAGHMQ","price":42.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/spta-front-packaging-buffering-kit.jpg?v=1785893517","url":"https:\/\/northtrailauto.ca\/products\/spta-buffing-polishing-pads-5-pc-6-5-face-6-back-foam-kit-mixed-cut-set-for-compounding-polishing-high-gloss-finish","provider":"North Trail Auto","version":"1.0","type":"link"}