{"product_id":"spta-t120-heavy-cut-foam-polishing-pads-6-5-3-pack-aggressive-cut-grooved-heat-reducing-design","title":"SPTA T120 Heavy-Cut Foam Polishing Pads 6.5\" (3-Pack) — Aggressive Cut, Grooved Heat-Reducing Design","description":"\u003cp\u003e\u003cstrong\u003eSPTA T120 heavy-cut 6.5-inch foam pads are aggressive polishing discs designed to remove sanding marks, heavy oxidation, and deep scratches when used with a rotary or dual-action polisher.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese three green T120 pads fit a 6-inch (150 mm) backing plate and combine a dense polyurethane foam with a vented groove pattern to hold compound, reduce heat buildup, and keep polishing consistent across painted surfaces. Built with hook-and-loop backing for quick changes, they’re intended for heavy compounding before finer polishing and finishing steps.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these pads tackle heavy scratches and sanding marks?\u003c\/h3\u003e\n\u003cp\u003eThe T120 heavy-cut formulation and dense foam structure deliver aggressive material removal without collapsing under pressure, making them effective on deep defects left by 1200–1500 grit sanding. The pad’s cut profile channels abrasive paste while maintaining contact area so the compound works efficiently across the surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDense polyurethane foam designed for high cut and durability.\u003c\/li\u003e\n  \u003cli\u003eGrooved face stores and distributes compound evenly.\u003c\/li\u003e\n  \u003cli\u003eOptimized for rotary and dual-action polishers with steady pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy does the pad have grooves, and how does that help during polishing?\u003c\/h3\u003e\n\u003cp\u003eThe grooves act as reservoirs for polishing compounds and abrasive slurry, preventing drying out or glazing on the pad face while improving airflow. Better air circulation reduces local heat buildup, which helps preserve paint and prolong pad life during extended compounding passes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompound channels reduce splatter and waste.\u003c\/li\u003e\n  \u003cli\u003eGrooves improve air flow to dissipate heat quickly.\u003c\/li\u003e\n  \u003cli\u003ePrevents abrasive clogging for consistent cutting action.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan these pads be reused and how should I care for them?\u003c\/h3\u003e\n\u003cp\u003eYes—proper cleaning after each session preserves cutting performance and extends service life. Remove excess compound during use, wash pads with warm water and mild soap after polishing, and avoid harsh solvents or alkaline cleaners that can damage the foam.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRinse with water and mild detergent; allow to air dry fully before storage.\u003c\/li\u003e\n  \u003cli\u003eBrush or spin-clean to remove embedded abrasives between passes.\u003c\/li\u003e\n  \u003cli\u003eReplace when foam shows excessive shredding, permanent glazing, or loss of elasticity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these pads fit my polisher and what surfaces are they best for?\u003c\/h3\u003e\n\u003cp\u003eEach pad measures 6.5 inches across with a hook-and-loop backing sized for 6-inch (150 mm) backing plates — a common size on many rotary and dual-action polishers. They’re formulated for automotive paint but also work on boats, metal, and other painted or gelcoat surfaces where heavy compounding is needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6.5\" pad diameter with Velcro backing for 6\" backing plates.\u003c\/li\u003e\n  \u003cli\u003eDesigned for car paint, gelcoat, and other hard finishes.\u003c\/li\u003e\n  \u003cli\u003eSuitable for professional detailers and DIY enthusiasts tackling heavy defects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Detailers and car owners who need a reliable, high-cut foam pad to remove deep scratches, sanding marks, heavy oxidation, or stubborn defects before moving to finishing pads. The SPTA T120 3-pack is for users who run rotary or dual-action polishers, want durable, ventilated pads that hold compound well, and need an economical set for repeated heavy compounding tasks. If you prioritize efficient material removal, reduced heat during compounding, and quick pad swaps thanks to Velcro backing, these pads suit workshop and weekend-detailing environments alike.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these pads safe on clear coat paint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, when used correctly: employ moderate pressure, the right compound, and finish with finer pads. Avoid excessive heat from prolonged stationary backing plate contact.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I clean the pads during a job?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Clean pads whenever abrasive buildup reduces cutting performance—typically after several panels or when compound glazing appears.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SPTA","offers":[{"title":"Default Title","offer_id":48087050911902,"sku":"B09S9W5JKG","price":33.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/spta-t120-front-packaging.jpg?v=1785915394","url":"https:\/\/northtrailauto.ca\/products\/spta-t120-heavy-cut-foam-polishing-pads-6-5-3-pack-aggressive-cut-grooved-heat-reducing-design","provider":"North Trail Auto","version":"1.0","type":"link"}