{"product_id":"suspa-16-gas-lift-supports-c16-09209-pair-38-lb-each-76-lb-set-for-camper-rear-window-tonneau-covers-10mm-ball-sockets","title":"Suspa 16\" Gas Lift Supports (C16-09209) — Pair, 38 lb Each (76 lb Set) for Camper Rear Window \u0026 Tonneau Covers, 10mm Ball Sockets","description":"\u003cp\u003e\u003cstrong\u003eSuspa C16-09209 gas props are a pair of 16-inch, gas-charged lift supports rated at 38 lb each (76 lb per set) designed as OEM-style replacements for camper rear windows, tonneau covers and similar lift applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Suspa lift supports use compressed gas inside a sealed cylinder to provide controlled opening and holding force for panels and windows. Manufactured to match OEM dimensions and fittings, the C16-09209 set is supplied with nylon 10mm ball-socket end fittings and is tested to meet the original specification. The props ship as a matched pair to ensure balanced lift and reliable operation for applications requiring a combined force near 76 pounds.\u003c\/p\u003e\n\n\u003ch3\u003eWhat measurements and fittings define the C16-09209?\u003c\/h3\u003e\n\u003cp\u003eThe C16-09209 is a 16-inch nominal gas prop with precise center-to-center lengths and common OEM-style end fittings. Confirm these dimensions and fittings against your original part to ensure fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompressed (center-to-center): 9.4 in (239 mm)\u003c\/li\u003e\n  \u003cli\u003eExtended (center-to-center): 15.7 in (399 mm)\u003c\/li\u003e\n  \u003cli\u003eForce per prop: 38 lb (169 N); total for pair: 76 lb\u003c\/li\u003e\n  \u003cli\u003eEnd fittings: 10 mm nylon ball sockets for quick socket mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these props perform compared with originals?\u003c\/h3\u003e\n\u003cp\u003eEach Suspa lift support is built to meet OEM specifications and undergoes testing to confirm performance close to or exceeding the original unit. Gas-charged supports can slowly lose pressure over time, so new components typically perform stronger than aged originals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTested to OEM dimensions and force output\u003c\/li\u003e\n  \u003cli\u003eDesigned to replace specific part numbers rather than serve as universals\u003c\/li\u003e\n  \u003cli\u003eDelivered as a matched two-piece set to maintain balanced lift\u003c\/li\u003e\n  \u003cli\u003eMade in the USA, with quality control per Suspa standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering a replacement set?\u003c\/h3\u003e\n\u003cp\u003eVerify your existing part number and compare center-to-center lengths and end fitting type before purchase. If the existing part number does not exactly match, internal components or fitment details may differ.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm original part number equals C16-09209 \/ C1609209\u003c\/li\u003e\n  \u003cli\u003eMeasure compressed and extended center-to-center distances\u003c\/li\u003e\n  \u003cli\u003eCheck that your mounting uses 10 mm ball studs compatible with nylon ball sockets\u003c\/li\u003e\n  \u003cli\u003eReplace both supports in a pair to avoid uneven wear and imbalance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I mount and maintain these gas supports?\u003c\/h3\u003e\n\u003cp\u003eInstallation is usually straightforward with ball-socket fittings; press onto the 10 mm studs until fully seated. Maintain by keeping pivots clean and avoiding exposure to corrosive chemicals; gas supports are sealed units and should not be disassembled or punctured.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSnap onto 10 mm ball studs; no special tools in most cases\u003c\/li\u003e\n  \u003cli\u003eLubricate mounting studs sparingly with appropriate grease if binding occurs\u003c\/li\u003e\n  \u003cli\u003eAvoid heat sources and sharp impacts that could damage the cylinder\u003c\/li\u003e\n  \u003cli\u003eReplace when noticeable sagging or loss of lift appears\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Suspa C16-09209 pair is intended for vehicle owners, mechanics, and RV\/camper DIYers who need OEM-style gas lift supports for rear windows, tonneau covers, or similar panels requiring approximately 76 pounds of combined lift. Choose this set when your original parts match the listed dimensions and fittings and you want a direct-fit replacement made to Suspa’s manufacturing standards.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these Suspa props a direct replacement for OEM part C1609209?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the C16-09209 (C1609209) set is manufactured to OEM specifications and intended as a direct-fit replacement when measurements and fittings match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these with standard 10 mm ball studs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, these props use 10 mm nylon ball sockets designed to snap onto standard 10 mm ball studs for straightforward installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Suspa","offers":[{"title":"Default Title","offer_id":48086146744478,"sku":"B00774U6HY","price":42.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/suspa-c16-09209-front-pair.jpg?v=1785886674","url":"https:\/\/northtrailauto.ca\/products\/suspa-16-gas-lift-supports-c16-09209-pair-38-lb-each-76-lb-set-for-camper-rear-window-tonneau-covers-10mm-ball-sockets","provider":"North Trail Auto","version":"1.0","type":"link"}