{"product_id":"suspenix-fl-910s-oil-filter-wrench-socket-74mm-14-flute-1-2-drive-heat-treated-steel","title":"Suspenix FL-910S Oil Filter Wrench Socket 74mm 14-Flute – 1\/2\" Drive Heat-Treated Steel","description":"\u003cstrong\u003eSuspenix FL-910S oil filter wrench is a heat-treated steel, 14-flute 74mm socket designed to remove and install FL-910S and select FL-500-S oil filters using a 1\/2\" drive.\u003c\/strong\u003e\n\n\u003cp\u003eIf your Ford or compatible vehicle uses the FL-910S (also labeled M1-114A, BE8Z-6731-AB or BE8Z6731AB) oil filter, this Suspenix socket gives you a precise, low-effort way to loosen and tighten the canister without improvised tools. Built to a specific diameter and flute count, it slips over the filter for firm contact and a clean transfer of torque from your ratchet or breaker bar.\u003c\/p\u003e\n\n\u003ch3\u003eWill this socket fit my vehicle's oil filter?\u003c\/h3\u003e\n\u003cp\u003eThe Suspenix FL-910S socket is engineered for filters with a 74mm exterior diameter and 14 flutes. It fits FL-910S family filters (including M1-114A and BE8Z-6731-AB) and some FL-500-S units, but it does not fit FL-500s variants that use 30 flutes. Always match the filter model printed on your filter to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 74mm (2.91\") outer diameter filters\u003c\/li\u003e\n  \u003cli\u003eMatches 14-flute style filters only\u003c\/li\u003e\n  \u003cli\u003eCompatible names: FL-910S, M1-114A, BE8Z-6731-AB\u003c\/li\u003e\n  \u003cli\u003eNot compatible with 30-flute FL-500s filters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does it save time and effort during maintenance?\u003c\/h3\u003e\n\u003cp\u003eRather than relying on straps, pliers, or chance, this socket provides a secure, even grip on the filter body so you can apply torque safely with a 1\/2\" drive. The tight fit reduces slippage and avoids marring the filter surface, letting you remove stubborn, over-torqued filters with less strain and cleaner hands.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/2\" drive accepts common ratchets and breaker bars\u003c\/li\u003e\n  \u003cli\u003eCup-style engagement distributes torque evenly\u003c\/li\u003e\n  \u003cli\u003eReduces need for improvised tools like belts or straps\u003c\/li\u003e\n  \u003cli\u003eMakes removal quicker and cleaner\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the construction and durability like?\u003c\/h3\u003e\n\u003cp\u003eThis socket is forged from heat-treated steel for strength and wear resistance under repeated use. Its dimensions and flute pattern are machined to engage accurately with compatible filter cans; treat it as a precision tool and avoid excessive overtightening on install to protect both the filter and the socket.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated steel body for longevity\u003c\/li\u003e\n  \u003cli\u003ePrecisely machined 14-flute interior profile\u003c\/li\u003e\n  \u003cli\u003eWeighs approximately 293 g (11.58 oz) for balanced handling\u003c\/li\u003e\n  \u003cli\u003eUse with 1\/2\" drive torque tools for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use and care for the FL-910S socket?\u003c\/h3\u003e\n\u003cp\u003eSlip the socket over the filter and turn with a 1\/2\" drive ratchet or breaker bar. Clean and lightly lubricate the drive square after use, store in a dry toolbox, and avoid using excessive force that could deform the tool or strip the filter flutes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall on filter until fully seated on flutes\u003c\/li\u003e\n  \u003cli\u003eApply steady torque with 1\/2\" drive tools\u003c\/li\u003e\n  \u003cli\u003eWipe clean and store dry after each job\u003c\/li\u003e\n  \u003cli\u003eDo not use as a hammer or pry tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Suspenix FL-910S socket is ideal for DIY mechanics, professional technicians, and fleet service crews who work on Ford Bronco, Edge, Escape, Explorer, Fiesta, Focus, Fusion, Maverick, Mustang, Ranger, Taurus models that specify FL-910S family filters. If you regularly change oil on compatible engines and want a faster, cleaner, and safer way to remove spin-on filters, this tool belongs in your toolbox.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the FL-910S socket work with FL-500-S filters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits FL-500-S variants that share a 74mm, 14-flute profile, but not FL-500s filters with 30 flutes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What drive size does the Suspenix socket use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The tool uses a 1\/2\" drive to accept standard ratchets, breaker bars, or torque wrenches.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Suspenix","offers":[{"title":"Default Title","offer_id":48084374421662,"sku":"B0FX44TSBM","price":30.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/suspenix-fl910s-front-view.jpg?v=1785852235","url":"https:\/\/northtrailauto.ca\/products\/suspenix-fl-910s-oil-filter-wrench-socket-74mm-14-flute-1-2-drive-heat-treated-steel","provider":"North Trail Auto","version":"1.0","type":"link"}