{"product_id":"taiss-racing-fuel-jug-hoses-14in-clear-4-pack-with-ball-valve-bender-fast-controlled-refueling-for-5-5-gal-vp-lc2-jugs","title":"Taiss Racing Fuel Jug Hoses 14in Clear (4-Pack) with Ball Valve \u0026 Bender — Fast, Controlled Refueling for 5.5 gal VP\/LC2 Jugs","description":"\u003cp\u003e\u003cstrong\u003eTaiss 4PCS 14-inch racing fuel jug hoses are a transparent, ball-valve-equipped replacement spout set made to speed and control refueling from LC2\/VP-style 5.5 gallon jugs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for pit crews, weekend racers and anyone who needs fast, controlled fuel transfers, this Taiss kit includes four soft, clear 14-inch hoses, a ball-valve shutoff, one hose bender and rubber gasket sealing for reliable fitment. The transparent tubing lets you watch flow and spot air or contamination, while the included cap and valve help keep fuel clean and flow predictable. These hoses fit common racing and utility jugs but are not intended for sealed highway fuel tank modifications.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this hose kit improve refueling speed and control?\u003c\/h3\u003e\n\n\u003cp\u003eThe Taiss hoses are long enough for quick reach and short enough to stay manageable in a busy pit or garage. The included ball valve lets you start and stop fuel flow instantly without tipping the jug, reducing spills and wasted fuel. The soft, flexible tube also makes aiming the spout easier so you can transfer fuel with steady control.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e14-inch transparent flexible tubing for clear flow visibility\u003c\/li\u003e\n  \u003cli\u003eBall valve shut-off for on-demand flow control\u003c\/li\u003e\n  \u003cli\u003eSoft material for accurate spout positioning and less splashing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these hoses fit my VP, LC2, or other common racing jugs?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the Taiss connectors are sized to match typical racing fuel jugs used in off-road and closed-circuit environments. The connector diameter measures about 0.79 inches (2 cm), and the kit includes a rubber gasket to improve sealing with threaded outlets. While it suits many aftermarket jugs (VP, LC2, Jegs-style), always check your jug’s outlet size to confirm compatibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConnector diameter ≈ 0.79 in (2 cm) for common racing jugs\u003c\/li\u003e\n  \u003cli\u003eRubber gasket included to enhance waterproof sealing\u003c\/li\u003e\n  \u003cli\u003eCompatible with VP racing fuel, LC2, Jegs and similar jugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain the Taiss fuel filler hose?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward: push the tube onto the jug outlet, fit the rubber gasket if needed, and secure the cap or valve. Use the supplied bender to shape the hose for a neat, drip-free run and keep the white protective cap on when not refueling. For maintenance, rinse the hose with a compatible solvent or fresh fuel before storage and inspect the gasket and valve for wear.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePush-fit installation with optional gasket for tighter seal\u003c\/li\u003e\n  \u003cli\u003eUse the included bender to form and support the hose shape\u003c\/li\u003e\n  \u003cli\u003eRinse and inspect regularly; replace if cracking or leaks appear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and practical limits should I be aware of?\u003c\/h3\u003e\n\n\u003cp\u003eThe Taiss hoses are designed for racing and utility refueling tasks, not as permanent or certified vehicle fuel tank plumbing for on-road vehicles. Avoid prolonged exposure to open flames and store away from heat sources; the transparent tube shows fuel but is not a pressure-rated component. Follow your event’s safety rules and local regulations when transferring fuel.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIntended for off-road, pit, and equipment refueling — not highway fuel plumbing\u003c\/li\u003e\n  \u003cli\u003eNot pressure-rated; avoid excessive strain or bending under load\u003c\/li\u003e\n  \u003cli\u003eKeep away from ignition sources and store capped when idle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Taiss 4PCS racing fuel jug hose kit is aimed at racers, pit crews, motorsport hobbyists, and small-engine users who need fast, visible and controlled refueling from 5.5-gallon style jugs. It’s also a practical upgrade for lawn-care pros, boaters, and motorcycle owners who use compatible racing-style fuel cans and want a spill-reducing, easy-to-install spout solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these hoses compatible with VP and LC2 racing jugs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the connector (~0.79 in\/2 cm) and included gasket fit common VP, LC2 and similar racing jugs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these hoses for on-road vehicle fuel tank repair?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, they are intended for refueling and racing\/utility use, not as permanent highway fuel tank plumbing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Taiss","offers":[{"title":"Default Title","offer_id":48084503462046,"sku":"B0CVWZKQF1","price":33.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/taiss-front-packaging-setup.jpg?v=1785857745","url":"https:\/\/northtrailauto.ca\/products\/taiss-racing-fuel-jug-hoses-14in-clear-4-pack-with-ball-valve-bender-fast-controlled-refueling-for-5-5-gal-vp-lc2-jugs","provider":"North Trail Auto","version":"1.0","type":"link"}