{"product_id":"taotao-obd-k-can-cable-for-bmw-e-series-ft232rl-usb-adapter-with-manual-switch-switchable-d-can-k-can","title":"Taotao OBD K+CAN cable for BMW E‑Series, FT232RL USB adapter with manual switch, switchable D-CAN\/K-CAN","description":"\u003cp\u003e\u003cstrong\u003eThe Taotao OBD K+CAN cable with FT232RL and a manual switch is a dedicated BMW E-series diagnostic and coding cable that reads\/clears faults, performs adaptations and applies coding on supported driver modules.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis interface cable is built for BMW owners and technicians who need a compact, switchable adapter to access D-CAN, PT-CAN and K-CAN networks across many BMW E-chassis and some MINI models. It uses the original FT232RL USB chipset for stable communication and includes a driver CD. Note: the cable only programs driver modules — several modules (CAS, SMG, key fob, light control) are not supported.\u003c\/p\u003e\n\n\u003ch3\u003eWhich BMW models and years will this cable work with?\u003c\/h3\u003e\n\u003cp\u003eThe cable supports a wide range of BMW E-series and related MINI models spanning late 1990s to around 2019, depending on the protocol used. It covers older BMW OBD interface cars and later D-CAN\/K-CAN vehicles, with a selectable switch to match bus speeds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible E-chassis: E46, E53, E60\/E61 (from 03\/2007 onward), E63\/E64 (from 03\/2007), E65\/E66\/E67, E70\/E71\/E72, E81\/E82\/E87\/E88 (from 03\/2007), E90\/E91\/E92\/E93 (from 03\/2007).\u003c\/li\u003e\n  \u003cli\u003eMINI models: R50, R52, R53, R55, R56, R57 (new MINI variants listed).\u003c\/li\u003e\n  \u003cli\u003eOlder BMW OBD interface support: cars from 1995–1998 (no K-line needed) and 1998–03\/2008 models.\u003c\/li\u003e\n  \u003cli\u003eUse switch fully right for E46; most other models use left — verify per vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat diagnostics and coding tasks can it perform?\u003c\/h3\u003e\n\u003cp\u003eThe cable handles core driver-module operations: reading and erasing fault codes, performing adaptations and applying coding changes to supported modules. It is designed specifically for driver modules and does not cover all vehicle modules or specialized control units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRead and delete diagnostic trouble codes from supported driver modules.\u003c\/li\u003e\n  \u003cli\u003eExecute adaptations and parameter coding where the module allows it.\u003c\/li\u003e\n  \u003cli\u003eFast and slow CAN bus support enables access to multiple in-car networks.\u003c\/li\u003e\n  \u003cli\u003eNot supported: CAS, key fob programming, SMG transmission replacements, and light-control module programming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I set up and use the cable on my PC?\u003c\/h3\u003e\n\u003cp\u003eInstall the FT232RL drivers included on the supplied CD and connect the cable to your Windows PC. The cable works best on Windows 7 32-bit; Windows 8\/10 may work but is not guaranteed. Disable antivirus software while installing diagnostic programs to avoid false-positive blocks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall driver from the included CD before plugging in the USB cable.\u003c\/li\u003e\n  \u003cli\u003ePreferred OS: Windows 7 32-bit; Windows 8\/10 compatibility varies.\u003c\/li\u003e\n  \u003cli\u003eTemporarily disable antivirus during software install and initial run.\u003c\/li\u003e\n  \u003cli\u003eUse the device switch to select D-CAN\/PT-CAN or K-CAN modes as needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy is the switch important and how should I position it?\u003c\/h3\u003e\n\u003cp\u003eThe onboard switch changes the cable’s bus settings so it can communicate with either fast or slow CAN magistrals and older K-line\/BMW OBD protocols. Correct switch position ensures reliable communication and avoids bus conflicts; some models require the switch in a particular position to work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSwitch left: default for most modern models to access K-CAN\/D-CAN\/PT-CAN.\u003c\/li\u003e\n  \u003cli\u003eSwitch right: recommended specifically for many E46 models.\u003c\/li\u003e\n  \u003cli\u003eIf a vehicle does not respond, toggle the switch position and retry diagnostics.\u003c\/li\u003e\n  \u003cli\u003eSwitching allows diagnosing driver modules without car-dependent reconfiguration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Taotao OBD K+CAN FT232RL cable is aimed at DIY enthusiasts, independent BMW mechanics and garages that need an affordable, portable interface for coding and diagnosing driver modules on a broad set of E-series and MINI vehicles. It’s not a full dealer-level programmer — if you require CAS, SMG, key fob or other specialized module programming, choose a dedicated professional tool instead.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this cable program all BMW modules?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It programs driver modules only and does not support CAS, SMG transmission replacement, key fob, or light-control module programming.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which operating systems are supported?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Best used with Windows 7 32-bit; Windows 8\/10 may work sporadically. Mac OS X is not supported.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Taotao","offers":[{"title":"Default Title","offer_id":48086295314590,"sku":"B07L498NGZ","price":41.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/taotao-cable-front-connector.jpg?v=1785894165","url":"https:\/\/northtrailauto.ca\/products\/taotao-obd-k-can-cable-for-bmw-e-series-ft232rl-usb-adapter-with-manual-switch-switchable-d-can-k-can","provider":"North Trail Auto","version":"1.0","type":"link"}