{"product_id":"tueletfu-fuel-filler-vent-hose-kit-for-jeep-wrangler-yj-1987-1995-20-gallon-plastic-tank-oem-fit-with-clamps","title":"TUELETFU Fuel Filler \u0026 Vent Hose Kit for Jeep Wrangler YJ 1987–1995 — 20‑Gallon Plastic Tank, OEM Fit with Clamps","description":"\u003cp\u003e\u003cstrong\u003eTUELETFU's fuel filler and vent hose kit replaces worn hoses on Jeep Wrangler YJ models (1987–1995) equipped with 20‑gallon plastic fuel tanks to restore a secure, leak‑free fill system.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your YJ has a 20‑gallon plastic tank and you notice fuel smell, seepage around the fill spout, or degraded hoses, this two‑hose kit is built to match the OEM fit and function. It replaces factory part numbers 52040079 and 52040081 and includes clamps so you can install both filler and vent lines and return to safe, confident refueling. Before ordering, confirm your Wrangler has the plastic tank (not the metal tank used in some 1987–1990 variants) and check the hose end sizes to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I verify these hoses fit my Jeep Wrangler YJ?\u003c\/h3\u003e\n\n\u003cp\u003eFitment is strictly for YJ models that use 20‑gallon plastic fuel tanks produced from 1987 through 1995. The kit will not fit Jeeps with a metal fuel tank found on some early model years. Measure the hose end diameters of your existing fittings and compare them to the specifications below to confirm compatibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eApplicable model years: 1987–1995 with 20‑gallon plastic tank only.\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers: 52040079 and 52040081.\u003c\/li\u003e\n  \u003cli\u003eConfirm your tank material — kit incompatible with metal tanks in some 1987–1990 vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact hose dimensions I should check?\u003c\/h3\u003e\n\n\u003cp\u003eTwo distinct hoses are included; each hose has a wall thickness of 3\/16\". Measure the inner diameter (ID) and outer diameter (OD) on the ends of your current filler and vent hoses to match the data below and guarantee a proper seal at the tank and filler neck.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e52040079 hose: small end ID 1\" \/ OD 1 3\/8\"; large end ID 1 1\/8\" \/ OD 1 9\/16\".\u003c\/li\u003e\n  \u003cli\u003e52040081 hose: small end ID ~3\/4\" \/ OD 1 1\/8\"; large end ID 1\" \/ OD 1 3\/8\".\u003c\/li\u003e\n  \u003cli\u003eWall thickness for both hoses: 3\/16\" for durability and fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how does installation look?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit ships with both the filler and vent hoses plus four clamps so you have all basic hardware to secure the connections at the fuel tank and fill neck. Installation is straightforward for a mechanically inclined DIYer: remove the old hoses and clamps, verify orientations, slide on the new hoses, and tighten the supplied clamps to factory‑tight specifications.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eContents: 2 hoses (filler and vent) and 4 metal clamps as shown in product images.\u003c\/li\u003e\n  \u003cli\u003eTools typically required: screwdriver or socket for clamps, and basic safety gear.\u003c\/li\u003e\n  \u003cli\u003eInspect hose routing and clamp tightness after first fill to confirm leak‑free operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any important cautions before purchase?\u003c\/h3\u003e\n\n\u003cp\u003eYes — this kit is specific to plastic 20‑gallon tanks; it will not work with metal tanks used on certain early YJ models. Double‑check the tank type and hose sizes to avoid returns, and contact the seller with photos if uncertain. Keep in mind correct hose orientation matters for proper venting and to prevent fuel odors.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNot compatible with metal fuel tanks found on some 1987–1990 Wranglers.\u003c\/li\u003e\n  \u003cli\u003eVerify all measurements and product details before ordering to ensure fit.\u003c\/li\u003e\n  \u003cli\u003eReach out to the seller for fitment help or questions — customer support is available.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This kit is intended for Jeep Wrangler YJ owners (1987–1995) who have the 20‑gallon plastic fuel tank and need to replace deteriorated filler or vent hoses. It suits DIY mechanics and shops seeking an OEM‑style, ready‑to‑install replacement set (complete with clamps) to restore a secure fill and proper venting without fabricating adapters or hunting individual parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit a 1988 Wrangler with a metal tank?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This kit fits only 20‑gallon plastic tanks. Metal tanks used on some early models are incompatible.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are clamps included with the hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package contains two hoses and four metal clamps ready for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TUELETFU","offers":[{"title":"Default Title","offer_id":48085360443550,"sku":"B09QKR15KH","price":39.17,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/tueleTFU-front-packaging-fuel-hose-kit.jpg?v=1785870148","url":"https:\/\/northtrailauto.ca\/products\/tueletfu-fuel-filler-vent-hose-kit-for-jeep-wrangler-yj-1987-1995-20-gallon-plastic-tank-oem-fit-with-clamps","provider":"North Trail Auto","version":"1.0","type":"link"}